[hylafax-users] facsimile not received but done

[Michele Petrazzo <michele.petrazzo@xxxxxxxxx>]

In my environment I have an hylafax server that sometime receive a fax,
but some some reason it fail (in this case for too bad lines), but the
very strange thing is that the sender machine "understand" that all is
ok (the sender send me its print report where I can read that it's all
ok, but hylafax say me that isn't all ok!)

Is there a solution for this?

Thanks,
Michele


Sep 28 12:36:50.59: [24089]: --> [7:CONNECT]
Sep 28 12:36:50.59: [24089]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Sep 28 12:36:50.59: [24089]: RECV FAX: begin
Sep 28 12:36:51.60: [24089]: --> [7:CONNECT]
Sep 28 12:36:52.79: [24089]: --> [2:OK]
Sep 28 12:36:52.79: [24089]: <-- [9:AT+FRH=3\r]
Sep 28 12:36:53.25: [24089]: --> [7:CONNECT]
Sep 28 12:36:54.68: [24089]: --> [2:OK]
Sep 28 12:36:54.69: [24089]: REMOTE TSI ""
Sep 28 12:36:54.69: [24089]: <-- [9:AT+FRH=3\r]
Sep 28 12:36:54.70: [24089]: --> [7:CONNECT]
Sep 28 12:36:54.95: [24089]: --> [2:OK]
Sep 28 12:36:54.95: [24089]: REMOTE wants 9600 bit/s
Sep 28 12:36:54.95: [24089]: REMOTE wants page width 1728 pixels in 215
mm
Sep 28 12:36:54.95: [24089]: REMOTE wants unlimited page length
Sep 28 12:36:54.95: [24089]: REMOTE wants 3.85 line/mm
Sep 28 12:36:54.95: [24089]: REMOTE wants 2-D MR
Sep 28 12:36:54.95: [24089]: RECV training at v.29 9600 bit/s
Sep 28 12:36:54.95: [24089]: <-- [10:AT+FRM=96\r]
Sep 28 12:36:55.26: [24089]: --> [7:CONNECT]
Sep 28 12:36:56.82: [24089]: RECV: TCF 1855 bytes, 2% non-zero, 1806
zero-run
Sep 28 12:36:56.82: [24089]: --> [10:NO CARRIER]
Sep 28 12:36:56.82: [24089]: DELAY 75 ms
Sep 28 12:36:56.90: [24089]: TRAINING succeeded
Sep 28 12:36:56.90: [24089]: <-- [9:AT+FTH=3\r]
Sep 28 12:36:56.91: [24089]: --> [7:CONNECT]
Sep 28 12:36:58.37: [24089]: --> [2:OK]
Sep 28 12:36:58.37: [24089]: <-- [10:AT+FRM=96\r]
Sep 28 12:36:59.25: [24089]: --> [7:CONNECT]
Sep 28 12:36:59.25: [24089]: RECV: begin page
Sep 28 12:37:23.24: [24089]: RECV: 1206 total lines, 7 bad lines, 7
consecutive bad lines
Sep 28 12:37:23.25: [24089]: RECV: REJECT page quality, 7-line run (max
5)
Sep 28 12:37:23.25: [24089]: RECV: end page
Sep 28 12:37:23.35: [24089]: --> [10:NO CARRIER]
Sep 28 12:37:23.35: [24089]: <-- [9:AT+FRH=3\r]
Sep 28 12:37:23.74: [24089]: --> [7:CONNECT]
Sep 28 12:37:24.46: [24089]: --> [2:OK]
Sep 28 12:37:24.46: [24089]: RECV recv EOP (no more pages or documents)
Sep 28 12:37:24.46: [24089]: <-- [9:AT+FRS=7\r]
Sep 28 12:37:24.58: [24089]: --> [2:OK]
Sep 28 12:37:24.58: [24089]: <-- [9:AT+FTH=3\r]
Sep 28 12:37:24.59: [24089]: --> [7:CONNECT]
Sep 28 12:37:26.05: [24089]: --> [2:OK]
Sep 28 12:37:26.05: [24089]: RECV send RTN (retrain negative)
Sep 28 12:37:26.05: [24089]: <-- [9:AT+FRH=3\r]
Sep 28 12:37:26.50: [24089]: --> [7:CONNECT]
Sep 28 12:37:27.40: [24089]: --> [2:OK]
Sep 28 12:37:27.40: [24089]: RECV recv DCN
Sep 28 12:37:27.40: [24089]: RECV FAX (00000836): recvq/fax00495.tif
from 34 93 3834255, route to <unspecified>, 0 pages in 0:37
Sep 28 12:37:27.40: [24089]: RECV FAX: COMREC received DCN
Sep 28 12:37:27.40: [24089]: <-- [9:AT+FTH=3\r]
Sep 28 12:37:27.42: [24089]: --> [7:CONNECT]
Sep 28 12:37:28.88: [24089]: --> [2:OK]
Sep 28 12:37:28.88: [24089]: RECV FAX (00000836): session with 34 93
3834255 terminated abnormally: COMREC received DCN
Sep 28 12:37:28.88: [24089]: RECV FAX: bin/faxrcvd "recvq/fax00495.tif"
"ttyS0" "00000836" "COMREC received DCN" "" ""

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*