|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] First page is blank
Hi, i have a problem sending a fax with attachments using faxmail in a
emailtofaxGateway.
I have the first page blank and the attachments starts from the second page.
I had configured the Headers: clean in /usr/share/fax/hyla.conf because I
need to send faxes with only attachments without body and headers of email.
My headers are clean and body message is empty but mi firs page is blank.
How can I cut this page?
I had verified that the ps file in /var/spool/hylafax/docq/ had already the
blank page.
My configuration is:
HylaFAX (tm) Version 4.2.1)
Mandrake 10.0
This is an example log file:
set 20 12:24:32.34: [ 2471]: SESSION BEGIN 000002723 390550553693200
set 20 12:24:32.34: [ 2471]: HylaFAX (tm) Version 4.2.1
set 20 12:24:32.34: [ 2471]: SEND FAX: JOB 258 DEST 0553693200 COMMID
000002723 DEVICE '/dev/ttyS1'
set 20 12:24:32.34: [ 2471]: <-- [9:AT+FLO=2\r]
set 20 12:24:32.57: [ 2471]: --> [2:OK]
set 20 12:24:32.57: [ 2471]: <-- [9:AT+FPP=0\r]
set 20 12:24:32.81: [ 2471]: --> [2:OK]
set 20 12:24:32.81: [ 2471]: <-- [9:AT+FBO=0\r]
set 20 12:24:33.05: [ 2471]: --> [2:OK]
set 20 12:24:33.05: [ 2471]: <-- [10:AT+FCT=30\r]
set 20 12:24:33.28: [ 2471]: --> [2:OK]
set 20 12:24:33.28: [ 2471]: <-- [15:AT+FNR=1,1,1,0\r]
set 20 12:24:33.52: [ 2471]: --> [2:OK]
set 20 12:24:33.52: [ 2471]: <-- [9:AT+FIE=0\r]
set 20 12:24:33.76: [ 2471]: --> [2:OK]
set 20 12:24:33.76: [ 2471]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
set 20 12:24:34.00: [ 2471]: --> [2:OK]
set 20 12:24:34.00: [ 2471]: DIAL 0553693200
set 20 12:24:34.00: [ 2471]: <-- [18:ATX3DT00553693200\r]
set 20 12:24:50.29: [ 2471]: --> [4:+FCO]
set 20 12:24:52.27: [ 2471]: --> [27:+FCI:"FAXSERVERPITTIIMM "]
set 20 12:24:52.27: [ 2471]: REMOTE CSI "FAXSERVERPITTIIMM"
set 20 12:24:52.27: [ 2471]: --> [20:+FIS:1,5,2,2,0,0,0,0]
set 20 12:24:52.27: [ 2471]: --> [2:OK]
set 20 12:24:52.27: [ 2471]: REMOTE best rate 14400 bit/s
set 20 12:24:52.27: [ 2471]: REMOTE max A3 page width (303 mm)
set 20 12:24:52.27: [ 2471]: REMOTE max unlimited page length
set 20 12:24:52.27: [ 2471]: REMOTE best vres 7.7 line/mm
set 20 12:24:52.27: [ 2471]: REMOTE best format 1-D MH
set 20 12:24:52.27: [ 2471]: REMOTE best 0 ms/scanline
set 20 12:24:52.27: [ 2471]: USE 14400 bit/s
set 20 12:24:52.27: [ 2471]: USE 0 ms/scanline
set 20 12:24:52.27: [ 2471]: SEND file "docq/doc264.ps;01"
set 20 12:24:52.27: [ 2471]: USE A4 page width (215 mm)
set 20 12:24:52.27: [ 2471]: USE unlimited page length
set 20 12:24:52.27: [ 2471]: USE 7.7 line/mm
set 20 12:24:52.27: [ 2471]: USE 1-D MH
set 20 12:24:52.27: [ 2471]: <-- [23:AT+FIS=1,5,0,2,0,0,0,0\r]
set 20 12:24:52.52: [ 2471]: --> [2:OK]
set 20 12:24:52.52: [ 2471]: <-- [7:AT+FDT\r]
set 20 12:24:52.80: [ 2471]: --> [20:+FCS:1,5,0,2,0,0,0,0]
set 20 12:24:59.47: [ 2471]: --> [7:CONNECT]
set 20 12:24:59.47: [ 2471]: SEND begin page
set 20 12:24:59.47: [ 2471]: <-- data [1027]
set 20 12:24:59.86: [ 2471]: <-- data [1026]
set 20 12:25:00.26: [ 2471]: <-- data [1024]
set 20 12:25:00.66: [ 2471]: <-- data [1024]
set 20 12:25:01.46: [ 2471]: <-- data [1024]
set 20 12:25:01.86: [ 2471]: <-- data [1024]
set 20 12:25:02.26: [ 2471]: <-- data [1024]
set 20 12:25:03.06: [ 2471]: <-- data [1024]
set 20 12:25:03.46: [ 2471]: <-- data [1024]
set 20 12:25:03.86: [ 2471]: <-- data [1024]
set 20 12:25:04.65: [ 2471]: <-- data [114]
set 20 12:25:04.65: [ 2471]: SENT 10354 bytes of data
set 20 12:25:04.65: [ 2471]: SEND 1D RTC
set 20 12:25:04.65: [ 2471]: <-- data [9]
set 20 12:25:04.66: [ 2471]: SEND end page
set 20 12:25:04.66: [ 2471]: SEND send MPS (more pages, same document)
set 20 12:25:04.66: [ 2471]: <-- data [2]
set 20 12:25:08.15: [ 2471]: --> [2:OK]
set 20 12:25:08.15: [ 2471]: <-- [8:AT+FPS?\r]
set 20 12:25:08.39: [ 2471]: --> [1:1]
set 20 12:25:08.52: [ 2471]: --> [2:OK]
set 20 12:25:08.52: [ 2471]: SEND recv MCF (message confirmation)
set 20 12:25:08.52: [ 2471]: SEND FAX (000002723): FROM xxx @ xxx.com TO
0553693200 (page 1 of 2 sent in 0:16)
set 20 12:25:08.52: [ 2471]: <-- [7:AT+FDT\r]
set 20 12:25:08.88: [ 2471]: --> [7:CONNECT]
set 20 12:25:08.88: [ 2471]: SEND begin page
set 20 12:25:08.88: [ 2471]: <-- data [1029]
set 20 12:25:09.27: [ 2471]: <-- data [1024]
set 20 12:25:09.67: [ 2471]: <-- data [1027]
set 20 12:25:10.07: [ 2471]: <-- data [1025]
set 20 12:25:10.87: [ 2471]: <-- data [1025]
set 20 12:25:11.27: [ 2471]: <-- data [1027]
set 20 12:25:11.66: [ 2471]: <-- data [1025]
set 20 12:25:12.46: [ 2471]: <-- data [1025]
set 20 12:25:12.86: [ 2471]: <-- data [1024]
set 20 12:25:13.26: [ 2471]: <-- data [1028]
set 20 12:25:14.06: [ 2471]: <-- data [1026]
set 20 12:25:14.46: [ 2471]: <-- data [1026]
set 20 12:25:14.86: [ 2471]: <-- data [1024]
set 20 12:25:15.66: [ 2471]: <-- data [1028]
set 20 12:25:16.06: [ 2471]: <-- data [1025]
set 20 12:25:16.46: [ 2471]: <-- data [1024]
set 20 12:25:17.25: [ 2471]: <-- data [1025]
set 20 12:25:17.65: [ 2471]: <-- data [1024]
set 20 12:25:18.05: [ 2471]: <-- data [1027]
set 20 12:25:18.85: [ 2471]: <-- data [1024]
set 20 12:25:19.25: [ 2471]: <-- data [1025]
set 20 12:25:19.65: [ 2471]: <-- data [1024]
set 20 12:25:20.45: [ 2471]: <-- data [1032]
set 20 12:25:20.85: [ 2471]: <-- data [1024]
set 20 12:25:21.25: [ 2471]: <-- data [1024]
set 20 12:25:22.05: [ 2471]: <-- data [1024]
set 20 12:25:22.45: [ 2471]: <-- data [31]
set 20 12:25:22.45: [ 2471]: SENT 26655 bytes of data
set 20 12:25:22.45: [ 2471]: SEND 1D RTC
set 20 12:25:22.45: [ 2471]: <-- data [9]
set 20 12:25:22.45: [ 2471]: SEND end page
set 20 12:25:22.45: [ 2471]: SEND send EOP (no more pages or documents)
set 20 12:25:22.45: [ 2471]: <-- data [2]
set 20 12:25:27.96: [ 2471]: --> [7:+FHS:00]
set 20 12:25:27.96: [ 2471]: REMOTE HANGUP: Normal and proper end of
connection (code 0)
set 20 12:25:27.96: [ 2471]: SEND recv MCF (message confirmation)
set 20 12:25:27.96: [ 2471]: SEND FAX (000002723): FROM xxx@xxxxxxx TO
0553693200 (page 2 of 2 sent in 0:19)
set 20 12:25:27.96: [ 2471]: SEND FAX (000002723): FROM xxx @ xxx.com TO
0553693200 (docq/doc264.ps;01 sent in 0:35)
set 20 12:25:28.96: [ 2471]: <-- [5:ATH0\r]
set 20 12:25:29.06: [ 2471]: --> [2:OK]
set 20 12:25:29.06: [ 2471]: SESSION END
Thanks in advance Ivano Miscali
-------------------
______
| |__| | () _ _
| () | []vano //\/\iscali
|______|
Pitti Immagine s.r.l. - Sistemi Informativi via Faenza, 109-111
50123 Firenze Italia
Tel. +39 055 3693268
Fax. +39 055 3693200
_____________________________________
PITTI IMMAGINE s.r.l.
via Faenza 111
50123 Firenze
www.pittimmagine.com
----------------------------------------------------------------------
AVVISO DI RISERVATEZZA
La seguente e-mail è tutelata legalmente dalla legge 675/96. Se si ritiene di non essere il destinatario di questa mail, si prega di darne immediata comunicazione al mittente e di provvedere immediatamente alla sua distruzione.
PRIVACY NOTICE
This e-mail has a confidential nature which is protected by the 675/96 Italian law. If you are not the intended addressee, please notify the sender and delete this information from your computer.
----------------------------------------------------------------------
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
