[hylafax-users] Problem configuring Caller ID retrieval in incoming faxes

["VaibhaV Sharma" <vsharma@xxxxxxxxxxxxxxx>]

Hello,

I have a standard hylafax fax setup for fax-to-email conversion.

 

I have a US Robotics internal modem (model Number 5610B) on ttyS14 -

 

MODEM U.S. ROBOTICS 56K FAX

 

This is running on Fedora Core 3. Basic fax-to-email works fine but I cant get the caller id data. Till now, I have done the following –

 

To test if my setup supports caller ID –

 

- Used minicom, initialized modem with AT#CID=1 and test that caller ID is enabled on the phone line, I get this on the terminal

 

--------------------

OK

at#cid=1

OK

 

RING

 

DATE = 0902

TIME = 1622

NMBR = 2013326900

NAME = ISHI SYS INC

 

RING

--------------------

 

I put “AT#CID=1” in etc/config.ttyS14 with the “ModemResetCmds:”.

 

The moment I put this parameter in config.ttyS14, hylafax stops accepting faxes. The line rings, hylafax picks up after 3 rings (as configured) and the handshake is never successful. I get this in the transaction log -

 

----

Sep 02 14:32:23.27: [ 5741]: SESSION BEGIN 000000036 12013326900

Sep 02 14:32:23.27: [ 5741]: HylaFAX (tm) Version 4.2.1

Sep 02 14:32:23.27: [ 5741]: <-- [4:ATA\r]

Sep 02 14:33:13.97: [ 5741]: --> [7:+FHS:74]

Sep 02 14:33:13.97: [ 5741]: REMOTE HANGUP: T.30 T1 timeout after EOM received (code 74)

Sep 02 14:33:13.97: [ 5741]: ANSWER: Ring detected without successful handshake

Sep 02 14:33:13.97: [ 5741]: SESSION END

-----

 

I remove the “ModemResetCmds:” and everything is back to normal.

 

What am I missing?

 

--

VaibhaV