Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] MaxCalls reached in a second



Hi,
fyi: the problem was solved :-) I was using the binary capi4hylafax
package from sid on sarge, but after compiling it from the source
everthing is working. I also limited the modems for outbound use by
defining a ModemGroup "any" which contains the desired modems.

Thanks for your help.

Regards
Thilo

Bodo Meissner wrote:

> Am 2005.07.20 11:57 schrieb(en) Thilo Hille:
>
>> Hylafax is version 1:4.2.1-5
>> Capi4hylafax is version 1:01.02.03-11
>> Capi4hylafax is from debian unstable as in the current sarge deb
>> (1:01.02.03-10) has an unfixed Bug in c2faxsend with Eicon Diva cards.
>
>
> Hello Thilo,
>
> your versions should be new enough. I think the changes from Hylafax 
> 1:4.2.1-5 to 1:4.2.1-7 are not important.
>
>> We have 8 B-Channels.
>
>
>> FIFOs in /var/spool/hylafax/:
>> prw------- 1 uucp uucp 0 2005-07-20 10:25 FIFO
>> prw-rw-rw- 1 uucp uucp 0 2005-07-19 15:18 FIFO.faxCAPI
>> prw-rw-rw- 1 uucp uucp 0 2005-07-19 17:43 FIFO.faxCAPI11
>> prw-rw-rw- 1 uucp uucp 0 2005-07-20 09:17 FIFO.faxCAPI12
>
> ...
>
>> prw-rw-rw- 1 uucp uucp 0 2005-07-19 17:43 FIFO.faxCAPI42
>
>
> That means Hylafax uses 9 devices: faxCAPI, faxCAPI11, ... faxCAPI42
>
>> in etc/ we have:
>> --rw-r--r-- 1 uucp uucp 5071 2005-07-19 15:19 config.faxCAPI
>> lrwxrwxrwx 1 uucp uucp 14 2005-07-19 17:42 config.faxCAPI11 ->
>> config.faxCAPI
>> lrwxrwxrwx 1 uucp uucp 14 2005-07-19 12:04 config.faxCAPI12 ->
>> config.faxCAPI
>
> ...
>
>> lrwxrwxrwx 1 uucp uucp 14 2005-07-19 15:20 config.faxCAPI42 ->
>> config.faxCAPI
>
>
> Same as above: 9 devices.
>
>> in etc/config.faxCAPI we have definitions for the following devices:
>> faxCAPI11
>> faxCAPI12
>
> ...
>
>> faxCAPI42
>
>
> Hylafax uses 9 devices but you configured only 8 of them. Maybe
> device  faxCAPI uses some default values.
>
>> Modemcapabilities are:
>> FaxQueuer[3118]: MODEM faxCAPI: READY, capabilities Pc87fcf01
>
>
> I don't know why Hylafax shows this value.
> The normal value as shown below for the other "modems" is a hard
> coded  string in the source code of capi4hylafax. IMHO capi4hylafax
> cannot  report this capability string.
>
>> FaxQueuer[3118]: MODEM faxCAPI11: READY, capabilities P3c7dffff:ff
>
>
> That is the normal value.
>
>> ... the 7 other are just the same than faxCAPI11.
>>
>> output from faxstat -i: (msn anonymized with **)
>
> ...
>
>> HylaFAX scheduler on cs1.ganter.local: Running
>> Modem|faxCAPI|(+49.**):|Running and idle
>> Modem|faxCAPI11|(+49.**):|Running and idle
>> Modem|faxCAPI12|(+49.**):|Running and idle
>
> ...
>
>> Modem|faxCAPI42|(+49.**):|Running and idle
>
>
> Same as above: 9 devices.
>
>> returncode of c2faxsend for 389 attempts was 0. two times it was
>> 0x200.
>
>
> 0 is retry. I don't know what 0x200 means.
>
>> Reducing the devicedefinitions in config.faxCAPI would leave me with
>> less than 8 channels which are all verified with sendfax -h
>> faxCAPI??@localhost ... and they are all working.
>
>
> I think you should not reduce the number of definitions but change
> the  device name to faxCAPI in one of them and remove the
> corresponding  files. Your problem seems to be Hylafax thinks you have
> 9 devices while  you have only 8 channels.
>
>
> A different problem is: Why does Hylafax retry immediately?
> Normally it should wait before retrying.
>
> Please show the syslog output related to a situation when Hylafax 
> retries immediately. There should be lines with "SEND INCOMPLETE".
> (Set ServerTracing and SessionTracing to higher values if necessary.
> I don't know what the different values mean, but I use 0x03FFFF for 
> both ServerTracing and SessionTracing.)
>
> Do this before changing the device definitions.
>
>
> Bodo
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>  To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
> /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
>
>


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services