[hylafax-users] hylafax exit status 0xa

To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] hylafax exit status 0xa
From: David Willis <dwok-@xxxxxx>
Date: Fri, 22 Jul 2005 09:00:49 +0200


 Hi,
 I've got hylafax running on a SGI 6.5.21.m
 I send a fax through windows (whfc) to my sgi.
 My modem connects with my "normal" fax but then interrupts.
 In my syslog I can see:
 
 Jul 20 21:04:00 6D:myhost FaxQueuer[625]: SUBMIT JOB 14
 Jul 20 21:04:00 6D:myhost FaxQueuer[625]: JOB 14 (active dest +mynr. 
 pri 127 tts 0:00 killtime 31:00:00): PREPARE START
 Jul 20 21:04:00 6D:myhost FaxQueuer[323167]: JOB 14 (active dest 
 +mynr. pri 127 tts 0:00 killtime 31:00:00): CONVERT DOCUMENT: 
 bin/ps2fax -o docq/doc13.ps;41 -r 196 -w 1728 -l 297 -m 4294967295 -2 
 docq/doc13.ps.14
 Jul 20 21:04:03 6D:myhost FaxQueuer[625]: JOB 14 (active dest +mynr. 
 pri 127 tts 0:00 killtime 30:59:57): PREPARE DONE
 Jul 20 21:04:03 6D:myhost FaxQueuer[625]: JOB 14 (active dest +mynr. 
 pri 127 tts 0:00 killtime 30:59:57): CMD START /usr/freeware/sbin/faxsend -m 
 ttyd2 sendq/q14 (PID 323117)
 Jul 20 21:04:03 6D:myhost FaxSend[323117]: MODEM set DTR OFF
 Jul 20 21:04:03 6D:myhost FaxSend[323117]: MODEM set baud rate: 0 baud (flow 
 control unchanged)
 Jul 20 21:04:03 6D:myhost FaxSend[323117]: DELAY 75 ms
 Jul 20 21:04:03 6D:myhost FaxSend[323117]: MODEM set DTR ON
 Jul 20 21:04:03 6D:myhost FaxSend[323117]: DELAY 2600 ms
 Jul 20 21:04:06 6D:myhost FaxSend[323117]: MODEM set baud rate: 9600 baud, 
 input flow RTS/CTS, output flow RTS/CTS
 Jul 20 21:04:06 6D:myhost FaxSend[323117]: MODEM flush i/o
 Jul 20 21:04:06 6D:myhost FaxSend[323117]: <-- [4:ATZ\r]
 Jul 20 21:04:06 6D:myhost FaxSend[323117]: --> [2:OK]
 Jul 20 21:04:06 6D:myhost FaxSend[323117]: DELAY 3000 ms
 Jul 20 21:04:09 6D:myhost FaxSend[323117]: <-- [5:ATE0\r]
 Jul 20 21:04:09 6D:myhost FaxSend[323117]: --> [4:ATE0]
 Jul 20 21:04:09 6D:myhost FaxSend[323117]: --> [2:OK]
 Jul 20 21:04:09 6D:myhost FaxSend[323117]: <-- [5:ATV1\r]
 Jul 20 21:04:09 6D:myhost FaxSend[323117]: --> [2:OK]
 Jul 20 21:04:09 6D:myhost FaxSend[323117]: <-- [5:ATQ0\r]
 Jul 20 21:04:10 6D:myhost FaxSend[323117]: --> [2:OK]
 Jul 20 21:04:10 6D:myhost FaxSend[323117]: <-- [7:ATS0=0\r]
 Jul 20 21:04:10 6D:myhost FaxSend[323117]: --> [2:OK]
 Jul 20 21:04:10 6D:myhost FaxSend[323117]: <-- [7:ATS8=2\r]
 Jul 20 21:04:10 6D:myhost FaxSend[323117]: --> [2:OK]
 Jul 20 21:04:10 6D:myhost FaxSend[323117]: <-- [8:ATS7=60\r]
 Jul 20 21:04:10 6D:myhost FaxSend[323117]: --> [2:OK]
 Jul 20 21:04:10 6D:myhost FaxSend[323117]: <-- [6:AT&K3\r]
 Jul 20 21:04:10 6D:myhost FaxSend[323117]: --> [2:OK]
 Jul 20 21:04:10 6D:myhost FaxSend[323117]: <-- [6:AT&D2\r]
 Jul 20 21:04:10 6D:myhost FaxSend[323117]: --> [2:OK]
Jul 20 21:04:10 6D:myhost FaxSend[323117]: <-- [6:AT&C1\r]
 Jul 20 21:04:10 6D:myhost FaxSend[323117]: --> [2:OK]
 Jul 20 21:04:10 6D:myhost FaxSend[323117]: <-- [12:AT+FCLASS=?\r]
 Jul 20 21:04:10 6D:myhost FaxSend[323117]: --> [7:0,1,1.0]
 Jul 20 21:04:10 6D:myhost FaxSend[323117]: --> [2:OK]
 Jul 20 21:04:10 6D:myhost FaxSend[323117]: <-- [12:AT+FCLASS=1\r]
 Jul 20 21:04:10 6D:myhost FaxSend[323117]: --> [2:OK]
 Jul 20 21:04:10 6D:myhost FaxSend[323117]: <-- [5:ATI3\r]
 Jul 20 21:04:11 6D:myhost FaxSend[323117]: --> [14:V2.065-K56_DLS]
 Jul 20 21:04:11 6D:myhost FaxSend[323117]: --> [2:OK]
 Jul 20 21:04:11 6D:myhost FaxSend[323117]: <-- [9:AT+FTM=?\r]
 Jul 20 21:04:11 6D:myhost FaxSend[323117]: --> 
 [41:3,24,48,72,73,74,96,97,98,121,122,145,146]
 Jul 20 21:04:11 6D:myhost FaxSend[323117]: --> [2:OK]
 Jul 20 21:04:11 6D:myhost FaxSend[323117]: <-- [9:AT+FRM=?\r]
 Jul 20 21:04:11 6D:myhost FaxSend[323117]: --> 
 [41:3,24,48,72,73,74,96,97,98,121,122,145,146]
 Jul 20 21:04:11 6D:myhost FaxSend[323117]: --> [2:OK]
 Jul 20 21:04:11 6D:myhost FaxSend[323117]: <-- [12:AT+FCLASS=1\r]
 Jul 20 21:04:11 6D:myhost FaxSend[323117]: --> [2:OK]
 Jul 20 21:04:11 6D:myhost FaxSend[323117]: MODEM ROCKWELL 
 RC288DPi/V2.065-K56_DLS
 Jul 20 21:04:11 6D:myhost FaxSend[323117]: <-- [5:ATM0\r]
 Jul 20 21:04:11 6D:myhost FaxSend[323117]: --> [2:OK]
 Jul 20 21:04:11 6D:myhost FaxSend[323117]: MODEM input buffering disabled
 Jul 20 21:04:11 6D:myhost FaxSend[323117]: SEND FAX: JOB 14 DEST mynr 
 COMMID 00000011 DEVICE '/dev/ttyd2'
 Jul 20 21:04:37 6D:myhost FaxQueuer[625]: JOB 14 (active dest +mynr 
 pri 127 tts 0:00 killtime 30:59:23): CMD DONE: exit status 0xa
 Jul 20 21:04:37 3D:myhost FaxQueuer[625]: JOB 14: Send program terminated 
 abnormally with exit status 0xa
 Jul 20 21:04:37 6D:myhost FaxQueuer[625]: NOTIFY: bin/notify "doneq/q14" 
 "failed" "0:34"
 
 can anyone help me please?
 
 thx. in advance
 David


_________________________________________________________________________
Mit der Gruppen-SMS von WEB.DE FreeMail können Sie eine SMS an alle 
Freunde gleichzeitig schicken: http://freemail.web.de/features/?mc=021179




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Follow-Ups:
- Re: [hylafax-users] hylafax exit status 0xa
  - From: Lee Howard

Prev by Date: [hylafax-users] Fwd: only scrambled lines in received faxes?
Next by Date: Re: [hylafax-users] Which version for a new installation
Previous by thread: Re: [hylafax-users] Which version for a new installation
Next by thread: Re: [hylafax-users] hylafax exit status 0xa
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services