[hylafax-users] Error converting document

[Ricardo José Souza Albuquerque <rsouza@xxxxxxxxxxxxxxxxxxx>]

Hi all,

I'm still trying to find a way to fix the segfault. I've increased the
server tracing, and in /var/log/messages I noticed that the Faxqueuer
process pass the following parameters to ps2fax script:

bin/ps2fax -o docq/doc1.ps;30 -r 98 -w 1728 -l 280 -m 4294967295 -1
docq/doc1.ps.1

I've executed this command by the shell, but I have no response (the
shell stops, without an error message, and returns to prompt only with
ctrl+c).

I've already tested the ps2fax script using the command:

ps2fax ~ricardo/faxps.ps -o teste.fax

and it's ok.

I'm suspecting that the problem is the parameters passed from the
faxqueuer to the ps2fax, but I don't know how to fix it.

Above, the complete sequence from the /var/log/messages.

Jul 21 09:06:31 ricardo FaxQueuer[3407]: JOB 1 (ready dest +32669616 pri
127 tts 0:00 killtime 2:56:34): PROCESS
Jul 21 09:06:31 ricardo FaxGetty[3414]: LOCKWAIT
Jul 21 09:06:31 ricardo FaxQueuer[3407]: JOB 1 (active dest +32669616
pri 127 tts 0:00 killtime 2:56:34): ACTIVE
Jul 21 09:06:31 ricardo FaxQueuer[3407]: JOB 1 (active dest +32669616
pri 127 tts 0:00 killtime 2:56:34): PREPARE START
Jul 21 09:06:31 ricardo FaxQueuer[3431]: JOB 1 (active dest +32669616
pri 127 tts 0:00 killtime 2:56:34): CONVERT DOCUMENT: bin/ps2fax -o
docq/doc1.ps;30 -r 98 -w 1728 -l 280 -m 4294967295 -1 docq/doc1.ps.1
Jul 21 09:06:31 ricardo FaxQueuer[3431]: JOB 1: CONVERT DOCUMENT: exit
status 0xb
Jul 21 09:06:31 ricardo FaxQueuer[3407]: JOB 1 (active dest +32669616
pri 127 tts 0:00 killtime 2:56:34): PREPARE DONE
Jul 21 09:06:31 ricardo FaxQueuer[3407]: NOTIFY: bin/notify "doneq/q1"
"format_failed" ""
Jul 21 09:06:31 ricardo FaxQueuer[3407]: JOB 1 (failed dest +32669616
pri 127 tts 0:00 killtime 2:56:34): DEAD
Jul 21 09:06:31 ricardo FaxQueuer[3407]: JOB 1 (failed dest +32669616
pri 127 tts 0:00 killtime 2:56:34): DELETE
Jul 21 09:06:31 ricardo FaxQueuer[3407]: NOTIFY exit status: 0 (3433)



Any clues?


Thanks in advance,

-- 
Ricardo José Souza Albuquerque <rsouza@xxxxxxxxxxxxxxxxxxx>
Sistema Verdes Mares de Comunicação



On Fri, 2005-07-15 at 18:30, Lee Howard wrote:
> Exit status 0xb is a segfault.  You should probably increase 
> ServerTracing in /var/spool/hylafax/etc/config to 0xFFF, take note of 
> the conversion script command, and then run that by hand from the 
> /var/spool/hylafax directory.  Hopefully that will give some clues.  If 
> not, then post that information and results here.
> 
> It could be libtiff or ghostscript.
> 
> Lee.
> 
> 
> Ricardo José Souza Albuquerque wrote:
> 
> >Hi all,
> >
> >I'm still trying to send a test page fax using a command line. The
> >server accepted a job, but the following error message is in
> >/var/log/message.
> >
> >Jul 15 18:14:21 ricardo FaxQueuer[6225]: JOB 9: CONVERT DOCUMENT: exit
> >status 0xb
> >Jul 15 18:14:21 ricardo FaxQueuer[6215]: NOTIFY: bin/notify "doneq/q9"
> >"format_failed" ""
> >Jul 15 18:14:22 ricardo FaxQueuer[6215]: NOTIFY exit status: 0 (6227)
> >
> >
> >This could be a problem with libtiff? Does anybody have any idea about
> >what's the problem?
> >
> >
> >Thanks in advance,
> >
> >  
> >
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> 



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*