Re: [hylafax-users] DID reporting

[Mark Ratering <techsupport@xxxxxxxxxxxxxx>]

> No, I'm not saying that. Yes, you can receive as much call 
> identification as you like... in current CVS.
>
> In 4.2.1 you are limited to CIDName and CIDNumber, and if you wish to 
> define one to be DID and the other to Caller*ID Number, then that's 
> fine, but you can't get Caller*ID Name, Caller*ID Number, *and* DID in 
> 4.2.1.
>
> As you're using Asterisk, probably connected to a channel bank or an 
> ATA your "DID" is probably coming in as shielded DTMF signals from the 
> PBX before the call is put through after the modem goes off-hook.
>
> So in current CVS (to become 4.2.2) you will do this in your modem 
> config file:
>
>  RingsBeforeAnswer: 0
>  ModemRingResponse: AT+FCLASS=8;H1
>  ModemRingsBeforeResponse: 2
>  CallIDPattern: "NAME="
>  CallIDPattern: "NMBR="
>  CallIDPattern: SHIELDED_DTMF
>  CallIDAnswerLength: 4
>  ModemAnswerCmd:  <delay:100>AT+FCLASS=1;A
>
> That assumes that the length of the DID signal coming from the PBX is 
> 4.  If it is different, then adjust CallIDAnswerLength (which must 
> come directly after "CallIDPattern: SHIELDED_DTMF") accordingly.
>
> Lee.

OK, i think i have narrowed the problem down to the fact that Asterisk 
may not be sending the DTMF digits.  I tried the SendDTMF function but 
that sends it to my SIP phone (at least when i am using that for 
testing).  Anyone know how to fix this?

-Mark

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*