Re: [hylafax-users] No dialtone with my new Rockforce modem.

To: "'Mark Ratering'" <techsupport@xxxxxxxxxxxxxx>, "'HylaFax Users'" <hylafax-users@xxxxxxxxxxx>
Subject: Re: [hylafax-users] No dialtone with my new Rockforce modem.
From: "support" <support@xxxxxxxxxxxx>
Reply-to: <support@xxxxxxxxxxxx>
Date: Wed, 29 Jun 2005 21:25:47 +0100

Have you tried both ports ?

Regards

Mainpine Support 

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Mark Ratering
Sent: 29 June 2005 20:28
To: HylaFax Users
Subject: [hylafax-users] No dialtone with my new Rockforce modem.

I have this Rockforce Duo+ all set up and i can minicom into it.  When i
type ath1 and look at the asterisk console i can see that it came off hook.
When i hook it up to hylafax however, it says there is no dial tone.  When i
look at the asterisk log, it says that it never came off hook.  Anyone have
any idea why this would happen?

Here is a log of it failing:
Jun 29 13:07:25 mail FaxSend[7138]: MODEM set DTR OFF Jun 29 13:07:25 mail
FaxSend[7138]: DELAY 75 ms Jun 29 13:07:25 mail FaxSend[7138]: MODEM set DTR
ON Jun 29 13:07:25 mail FaxSend[7138]: DELAY 2600 ms Jun 29 13:07:28 mail
FaxSend[7138]: MODEM set baud rate: 57600 baud, input flow RTS/CTS, output
flow RTS/CTS Jun 29 13:07:28 mail FaxSend[7138]: DELAY 10 ms Jun 29 13:07:28
mail FaxSend[7138]: MODEM flush i/o Jun 29 13:07:28 mail FaxSend[7138]: <--
[4:ATZ\r] Jun 29 13:07:29 mail FaxSend[7138]: --> [2:OK] Jun 29 13:07:29
mail FaxSend[7138]: DELAY 3000 ms Jun 29 13:07:32 mail FaxSend[7138]: MODEM
flush i/o Jun 29 13:07:32 mail FaxSend[7138]: <-- [10:AT+VCID=1\r] Jun 29
13:07:32 mail FaxSend[7138]: --> [9:AT+VCID=1] Jun 29 13:07:32 mail
FaxSend[7138]: --> [2:OK] Jun 29 13:07:32 mail FaxSend[7138]: <--
[7:ATS0=0\r] Jun 29 13:07:32 mail FaxSend[7138]: --> [6:ATS0=0] Jun 29
13:07:32 mail FaxSend[7138]: --> [2:OK] Jun 29 13:07:32 mail FaxSend[7138]:
<-- [5:ATE0\r] Jun 29 13:07:32 mail FaxSend[7138]: --> [4:ATE0] Jun 29
13:07:32 mail FaxSend[7138]: --> [2:OK] Jun 29 13:07:32 mail FaxSend[7138]:
<-- [5:ATV1\r] Jun 29 13:07:32 mail FaxSend[7138]: --> [2:OK] Jun 29
13:07:32 mail FaxSend[7138]: <-- [5:ATQ0\r] Jun 29 13:07:32 mail
FaxSend[7138]: --> [2:OK] Jun 29 13:07:32 mail FaxSend[7138]: <--
[7:ATS8=2\r] Jun 29 13:07:33 mail FaxSend[7138]: --> [2:OK] Jun 29 13:07:33
mail FaxSend[7138]: <-- [8:ATS7=60\r] Jun 29 13:07:33 mail FaxSend[7138]:
--> [2:OK] Jun 29 13:07:33 mail FaxSend[7138]: <-- [12:AT+FCLASS=?\r] Jun 29
13:07:33 mail FaxSend[7138]: --> [15:0,1,1.0,2,2.1,8] Jun 29 13:07:33 mail
FaxSend[7138]: --> [2:OK] Jun 29 13:07:33 mail FaxSend[7138]: MODEM Supports
"Data"
Jun 29 13:07:33 mail FaxSend[7138]: MODEM Supports "Class 1"
Jun 29 13:07:33 mail FaxSend[7138]: MODEM Supports "Class 2"
Jun 29 13:07:33 mail FaxSend[7138]: MODEM Supports "Class 1.0"
Jun 29 13:07:33 mail FaxSend[7138]: MODEM Supports "Class 2.1"
Jun 29 13:07:33 mail FaxSend[7138]: MODEM Supports "Voice"
Jun 29 13:07:33 mail FaxSend[7138]: <-- [14:AT+FCLASS=1.0\r] Jun 29 13:07:33
mail FaxSend[7138]: --> [2:OK] Jun 29 13:07:33 mail FaxSend[7138]: <--
[5:ATI3\r] Jun 29 13:07:33 mail FaxSend[7138]: --> [71:Mainpine Venus V.92
I03.04.02 (0026SD) Voice V2 V92cap 12ns RAM Mercury] Jun 29 13:07:33 mail
FaxSend[7138]: --> [2:OK] Jun 29 13:07:33 mail FaxSend[7138]: MODEM: Mfr
Mainpine Venus V.92
I03.04.02 (0026SD) Voice V2 V92cap 12ns RAM Mercury Jun 29 13:07:33 mail
FaxSend[7138]: <-- [5:ATI0\r] Jun 29 13:07:33 mail FaxSend[7138]: -->
[71:Mainpine Venus V.92
I03.04.02 (0026SD) Voice V2 V92cap 12ns RAM Mercury] Jun 29 13:07:33 mail
FaxSend[7138]: --> [2:OK] Jun 29 13:07:33 mail FaxSend[7138]: MODEM: Model
Mainpine Venus V.92
I03.04.02 (0026SD) Voice V2 V92cap 12ns RAM Mercury Jun 29 13:07:33 mail
FaxSend[7138]: <-- [9:AT+FTM=?\r] Jun 29 13:07:33 mail FaxSend[7138]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Jun 29 13:07:33 mail FaxSend[7138]: --> [2:OK] Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 3.85 line/mm Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 7.7 line/mm Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 15.4 line/mm Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports R16 x 15.4 line/mm Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 200 x 100 dpi Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 200 x 200 dpi Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 200 x 400 dpi Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 300 x 300 dpi Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 2400 bit/s Jun 29 13:07:33 mail FaxSend[7138]:
MODEM Supports 4800 bit/s Jun 29 13:07:33 mail FaxSend[7138]: MODEM Supports
7200 bit/s Jun 29 13:07:33 mail FaxSend[7138]: MODEM Supports 9600 bit/s Jun
29 13:07:33 mail FaxSend[7138]: MODEM Supports 12000 bit/s Jun 29 13:07:33
mail FaxSend[7138]: MODEM Supports 14400 bit/s Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 16800 bit/s Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 19200 bit/s Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 21600 bit/s Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 24000 bit/s Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 26400 bit/s Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 28800 bit/s Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 31200 bit/s Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 33600 bit/s Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports A4 page width (215 mm) Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports B4 page width (255 mm) Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports A3 page width (303 mm) Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports A4 page length (297 mm) Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports B4 page length (364 mm) Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports unlimited page length Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 1-D MH Jun 29 13:07:33 mail FaxSend[7138]:
MODEM Supports 2-D MR Jun 29 13:07:33 mail FaxSend[7138]: MODEM Supports 2-D
MMR Jun 29 13:07:33 mail FaxSend[7138]: MODEM Supports no ECM Jun 29
13:07:33 mail FaxSend[7138]: MODEM Supports T.30 Annex A, 64-byte ECM Jun 29
13:07:33 mail FaxSend[7138]: MODEM Supports T.30 Annex A, 256-byte ECM Jun
29 13:07:33 mail FaxSend[7138]: MODEM Supports 0 ms/scanline Jun 29 13:07:33
mail FaxSend[7138]: MODEM Supports 5 ms/scanline Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 10 ms, 5 ms/scanline Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 10 ms/scanline Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 20 ms, 10 ms/scanline Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 20 ms/scanline Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 40 ms, 20 ms/scanline Jun 29 13:07:33 mail
FaxSend[7138]: MODEM Supports 40 ms/scanline Jun 29 13:07:33 mail
FaxSend[7138]: <-- [9:AT+FRM=?\r] Jun 29 13:07:33 mail FaxSend[7138]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Jun 29 13:07:33 mail FaxSend[7138]: --> [2:OK] Jun 29 13:07:33 mail
FaxSend[7138]: MODEM MAINPINE VENUS V.92 I03.04.02
(0026SD) VOICE V2 V92CAP 12NS RAM MERCURY Mainpine Venus V.92 I03.04.02
(0026SD) Voice V2 V92cap 12ns RAM Mercury/ Jun 29 13:07:33 mail
FaxSend[7138]: <-- [5:ATM0\r] Jun 29 13:07:33 mail FaxSend[7138]: --> [2:OK]
Jun 29 13:07:33 mail FaxSend[7138]: STATE CHANGE: BASE -> RUNNING (timeout
30) Jun 29 13:07:33 mail FaxSend[7138]: MODEM input buffering disabled Jun
29 13:07:33 mail FaxSend[7138]: SEND FAX: JOB 18 DEST 711 COMMID
000000033 DEVICE '/dev/ttyS3'
Jun 29 13:07:44 mail FaxSend[7138]: SEND FAILED: JOB 18 DEST 711 ERR No
local dialtone


-Mark

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

References:
- [hylafax-users] No dialtone with my new Rockforce modem.
  - From: Mark Ratering

Prev by Date: [hylafax-users] slmodem 2800 cannot receive fax
Next by Date: Re: [hylafax-users] Cannot send fax with PDF
Previous by thread: [hylafax-users] No dialtone with my new Rockforce modem.
Next by thread: Re: [hylafax-users] No dialtone with my new Rockforce modem.
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services