Re: [hylafax-users] Scheduler NAK'd Request

["Biju Mohandas" <biju.mohandas@xxxxxxxxxxxx>]

Thanks for the reply..

Well now from the server(Mandrake 10.1/Hylafax-4.2.1) I can send and receive
faxes. It was a problem with the phone line being shared at the same time.
That works fine. But still have the problem with WHFC while sending fax to
the server. I get the same "Scheduler NAK'd Request" error and the fax is
put in the local queue on the client. At the same time I can view the faxes
that I received on the server with WHFC (using ACDSee), that works fine,
just wanna be able to send though. I searched while for but couldnt find any
info on this. thanks.

Biju.

-----Original Message-----
From: Lee Howard [mailto:faxguy@xxxxxxxxxxxxxxxx]
Sent: Tuesday, June 14, 2005 9:23 PM
To: biju.mohandas@xxxxxxxxxxxx
Cc: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] Scheduler NAK'd Request


Biju Mohandas wrote:

>Hi,
>
>I just installed the Hylafax-4.2.1 on a Mandrake 10.1 and WHFC on Windows
>XP. Everything seems to connect fine, but when I send a .txt document
>through the WHFC client I get the error "Unspecified Error - Scheduler
>NAK'd Request" and the fax message is not sent to the Fax Server. I am new
>to this stuff and well  also to Linux.
>
>I also send a test fax from the server using the following:
>Fax# sendfax -n -d 12345 /home/mydir/testfax.txt
>After I do this I can see that this fax is in the queue after i do a
>faxstat -s, but the pages is 0 and the TTS does not show anything,the dial
>is 0.12sec and the fax is not received on the other end(which is another
>fax line in the same office). Could anyone pls tell me if this is the
>right way to do it. Any help would highly appreciated. Thanks.
>
>

I don't suppose that there's a session log, is there?

If not, then you need to set ServerTracing to 0xFFF in
/var/spool/hylafax/etc/config, restart faxq, and then do the same thing
again.  Then look at your server logs (syslog, usually
/var/log/messages) to see what's going on.  If you can't make sense of
it then send those logs here.

Chances are good, though, that you've got a Ghostscript problem.

Lee.

--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.7.3/15 - Release Date: 6/14/2005

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.7.5/18 - Release Date: 6/15/2005


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*