Yes, it's pretty the same log; no error occured.
=============================================
An attempt to receive facsimile on faxmodem failed because:
---- Transcript of session follows ----
Jun 07 10:49:29.27: [26263]: SESSION BEGIN 000000882 499912909029
Jun 07 10:49:29.27: [26263]: HylaFAX (tm) Version 4.2.1
Jun 07 10:49:29.27: [26263]: <-- [4:ATA\r]
Jun 07 10:49:42.24: [26263]: --> [5:+FCON]
Jun 07 10:49:42.24: [26263]: ANSWER: FAX CONNECTION DEVICE '/dev/faxmodem'
Jun 07 10:49:42.24: [26263]: RECV FAX: begin
Jun 07 10:49:44.56: [26263]: --> [32:+FTSI: " 09929 941122"]
Jun 07 10:49:44.56: [26263]: REMOTE TSI "09929 941122"
Jun 07 10:49:44.83: [26263]: --> [21:+FDCS:1,5,0,2,0,0,0,0]
Jun 07 10:49:44.83: [26263]: REMOTE wants 14400 bit/s
Jun 07 10:49:44.83: [26263]: REMOTE wants A4 page width (215 mm)
Jun 07 10:49:44.83: [26263]: REMOTE wants unlimited page length
Jun 07 10:49:44.83: [26263]: REMOTE wants 7.7 line/mm
Jun 07 10:49:44.83: [26263]: REMOTE wants 1-D MH
Jun 07 10:49:48.36: [26263]: --> [2:OK]
Jun 07 10:49:48.36: [26263]: <-- [7:AT+FDR\r]
Jun 07 10:49:48.47: [26263]: --> [5:+FCFR]
Jun 07 10:49:49.73: [26263]: --> [7:CONNECT]
Jun 07 10:49:49.73: [26263]: RECV: begin page
Jun 07 10:49:49.73: [26263]: RECV: send trigger 022
Jun 07 10:49:49.73: [26263]: Copy quality checking performed by host
Jun 07 10:50:49.66: [26263]: RECV: 2306 total lines, 0 bad lines, 0
consecutive bad lines
Jun 07 10:50:49.66: [26263]: --> [8:+FPTS:1 ]
Jun 07 10:50:50.86: [26263]: --> [7:+FET:0 ]
Jun 07 10:50:50.86: [26263]: RECV recv MPS (more pages, same document)
Jun 07 10:50:50.86: [26263]: --> [2:OK]
Jun 07 10:50:50.86: [26263]: RECV send MCF (message confirmation)
Jun 07 10:50:50.86: [26263]: RECV FAX (000000882): from 09929 941122, page 1
in 1:02, INF, 7.7 line/mm, 1-D MH, 14400 bit/s
Jun 07 10:50:50.86: [26263]: <-- [7:AT+FDR\r]
Jun 07 10:50:52.34: [26263]: --> [7:CONNECT]
Jun 07 10:50:52.34: [26263]: RECV: begin page
Jun 07 10:50:52.34: [26263]: RECV: send trigger 022
Jun 07 10:50:52.34: [26263]: Copy quality checking performed by host
Jun 07 10:51:58.27: [26263]: RECV: 2308 total lines, 1 bad lines, 1
consecutive bad lines
Jun 07 10:51:58.27: [26263]: --> [8:+FPTS:1 ]
Jun 07 10:51:59.46: [26263]: --> [7:+FET:2 ]
Jun 07 10:51:59.46: [26263]: RECV recv EOP (no more pages or documents)
Jun 07 10:51:59.46: [26263]: --> [2:OK]
Jun 07 10:51:59.46: [26263]: RECV send MCF (message confirmation)
Jun 07 10:51:59.46: [26263]: RECV FAX (000000882): from 09929 941122, page 2
in 1:09, INF, 7.7 line/mm, 1-D MH, 14400 bit/s
Jun 07 10:51:59.46: [26263]: RECV FAX (000000882): recvq/fax000003587.tif
from 09929 941122, route to <unspecified>, 2 pages in 2:17
Jun 07 10:51:59.46: [26263]: <-- [7:AT+FDR\r]
Jun 07 10:52:03.21: [26263]: --> [8:+FHNG:0 ]
Jun 07 10:52:03.21: [26263]: REMOTE HANGUP: Normal and proper end of
connection (code 0)
Jun 07 10:52:03.21: [26263]: RECV FAX: bin/faxrcvd "recvq/fax000003587.tif"
"faxmodem" "000000882" "" "" ""
Jun 07 10:52:03.21: [26263]: RECV FAX: end
Jun 07 10:52:03.21: [26263]: SESSION END
===========================================
----- Original Message -----
From: "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx>
To: "Nico Decker" <ndecker-hylafax2@xxxxxxxxxxx>
Cc: <hylafax-users@xxxxxxxxxxx>
Sent: Tuesday, June 07, 2005 6:32 PM
Subject: Re: [hylafax-users] Unknown reason for error "facsimile not
received"
Nico Decker wrote:
One minute ago, I received a "facsimile not received"-
message.
Do You have another proposal?
Was there an error? Or was the log the same? Can I see the log again?
Lee.
