Re: [hylafax-users] Modem capabilities

[Matthias Reich <rei@xxxxxxxx>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Am Mittwoch, 20. April 2005 15:45 schrieb Lee Howard:
> On Wed, 20 Apr 2005, Matthias Reich wrote:
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA1
> >
> > Am Dienstag, 19. April 2005 16:59 schrieb Lee Howard:
> > > Matthias Reich wrote:
> > > >Apr 18 15:18:14.38: [30309]: --> [21:+FDIS:1,5,0,2,1,2,1,3]
> > > >Apr 18 15:18:14.38: [30309]: --> [2:OK]
> > > >Apr 18 15:18:14.38: [30309]: REMOTE best rate 14400 bit/s
> > > >Apr 18 15:18:14.38: [30309]: REMOTE max page width 1728 pixels in 215
> > > > mm Apr 18 15:18:14.38: [30309]: REMOTE max unlimited page length Apr
> > > > 18 15:18:14.38: [30309]: REMOTE best vres 7.7 line/mm
> > > >Apr 18 15:18:14.38: [30309]: REMOTE best format 2-D MR
> > > >Apr 18 15:18:14.38: [30309]: REMOTE supports T.30 Annex C, half duplex
> > > > ECM Apr 18 15:18:14.38: [30309]: REMOTE best 10 ms/scanline
> > > >Apr 18 15:18:14.38: [30309]: USE 14400 bit/s
> > > >Apr 18 15:18:14.38: [30309]: USE 10 ms/scanline
> > > >Apr 18 15:18:14.38: [30309]: SEND file "docq/doc11220.ps;00"
> > > >Apr 18 15:18:14.38: [30309]: USE page width 1728 pixels in 215 mm
> > > >Apr 18 15:18:14.38: [30309]: USE unlimited page length
> > > >Apr 18 15:18:14.38: [30309]: USE 3.85 line/mm
> > > >Apr 18 15:18:14.38: [30309]: USE 1-D MR
> > > >Apr 18 15:18:14.38: [30309]: <-- [24:AT+FDIS=0,5,0,2,0,0,0,3\r]
> > > >Apr 18 15:18:14.70: [30309]: --> [2:OK]
> > >
> > > So does this modem *ever* send in 2-D or is it just having problems
> > > with this one sender?
> > >
> > > Lee.
> >
> > Hi Lee,
> >
> > I check the sessionlogs today, and big suprise the modem sends all faxes
> > with 1-D MR.
> > Strange, as far as I understand the logfile, the modem tells hylafax that
> > it is able to use 2-D MR, the REMOTE best format is 2-D MR, but hylafax
> > tells the modem to use 1-D MR.
> > I have no idea how to pursuade hylafax to use 2-D MR
> > I also put Use2D: Yes in the config file but still no success.
> > Do you have another idea ?
>
> Well, the reason why 1-D is being used is because faxq is preparing all
> faxes for this modem with 1-D encoding.  As you're using an older version
> of HylaFAX it's possible that this is a bug that has been fixed.  You may
> want to upgrade to 4.2.1.  At the very least, upgraging will get you
> ModemSoftRTFCC which will allow faxsend to convert from 1-D to 2-D
> on-the-fly.
>
> Lee.
>
>
Hi Lee,

I understand that, but on my other servers with the same hylafax version and 
the same type of modem (Multitech MT1432BG, same firmware) 2-D MR works fine
(config file and modem config files are equal too)

- -m
 
- -- 
HAGOS eG                 phone: +49 711 7880592
Matthias Reich             fax: +49 711 7880535
Industriestr. 62           web: http://www.hagos.de
D-70565 Stuttgart         mail: rei@xxxxxxxx
Germany
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (GNU/Linux)

iD8DBQFCZl9ncjMVLPQ5oUkRApfyAJ9A/+rk1RuUBCK71/AmUVgeIJA5TQCgja1M
N0dhMBDegF6PHcVwh3xXVPk=
=Q+RE
-----END PGP SIGNATURE-----

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*