Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] A Hint about Devolo Microlink Fun II and Failure to train remote modem
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Am Mittwoch, 23. März 2005 21:21 schrieb Lee Howard:
> Heino Backhaus wrote:
> > I took the generic class1 configfile as template and changed the
> > following parameters:
> > ModemRate: 57600 # rate for DCE-DTE communication
> > ModemFlowControl: rtscts # RTS/CTS flow control assumed
> > ModemResetCmds: "AT&FV1E0&D2&C1S0=0+MR=0;+DR=1;+ER=1;+ILRR=0"
> > ModemNoFlowCmd: AT+ifc=0,0; # (&K) disable flow control cmd
> > ModemHardFlowCmd: AT+ifc=2,2; # (&K3) hardware flow control cmd
> > ModemSoftFlowCmd: AT+ifc=1,1; # (&K4) software flow control cmd
>
> Have you done the work to learn *which* of these several AT commands are
> the ones that made the difference?
>
> For example, in your ModemResetCmds you have ATS0=0 which certainly can
> be removed. Likewise ATE0. I'm not sure about AT&D2 and AT&C1, but I
> think that these are basic configuration settings that would be best
> altered elsewhere (other than ModemResetCmds). AT&F probably
> accomplishes the same thing as ATZ, so that's unnecessary most likely.
> ATV1 is also probably not needed or is better configured elsewhere. So
> I think that brings us down to:
>
> AT+MR=0, AT+DR=1, AT+ER=1, and AT+ILRR=0. Do you know what these
> settings do?
>
> Do the traditional AT&K, AT&K3, and AT&K4 not work on your modem?
>
> Lee.
>
Hi Lee, Hi Heino. Hi List
I have had the same problems with this modem
see:
http://www.hylafax.org/archive/2004-11/msg00271.html
this problem occurs with brother fax machines only.
they identify themselves as:
NSF remote fax equipment: Brother Intellifax 770
or
NSF remote fax equipment: Brother
I will check this config file and see if the brother machines will then talk
to the modem correctly.
- --
HAGOS eG phone: +49 711 7880592
Matthias Reich fax: +49 711 7880535
Industriestr. 62 web: http://www.hagos.de
D-70565 Stuttgart mail: rei@xxxxxxxx
Germany
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (GNU/Linux)
iD8DBQFCQljJcjMVLPQ5oUkRAv1RAJ9eocvJMtI7SfkrzEmEGemx7nTpMwCffhgs
yY/qSYQ6kERRt2m8xkc4TeE=
=4iR2
-----END PGP SIGNATURE-----
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*