|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Intel 536EP HylaFAX 4.2.1 Failed to properly detect high-speed data carrier
Martijn Kint wrote:
Mar 09 13:32:26.41: [26174]: MODEM input buffering enabled
Mar 09 13:32:26.41: [26174]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Mar 09 13:32:26.41: [26174]: <-- [11:AT+FRM=146\r]
Mar 09 13:32:33.41: [26174]: MODEM TIMEOUT: reading line from modem
Mar 09 13:32:33.41: [26174]: <-- data [1]
Mar 09 13:32:33.54: [26174]: --> [2:OK]
This is the error. It's quite clear that the high-speed data carrier
was not detected by the modem.
That said, I strongly suspect that this is an error on the part of the
modem itself. Either it doesn't implement +FCERROR as it is supposed
to, or some other problem. I have a few 536EP modems myself, and I've
not yet been able to successfully use them. I haven't put much effort
into it, though.
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
