Re: [hylafax-users] RECV/CQ: Bad 1D pixel count ...

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Diego Chaparro wrote:

> 	Hi Lee and all,
>
> 	I've been following your suggestions about VoIP and faxes, and in order
> to avoid these kind of problems i've replaced the asterisk pbx with a
> traditional analog Panasonic PBX (Model KX-T206SP). The results are that
> i have the same problems :-(, so i don't think it's a VoIP issue now. 
>
> 	As you also suggested i've tried to send faxes from one hylafax server
> to another hylafax server:
>
> Hylafax Linux ------ Modem ---- Panasonic ---- Modem ----- Hylafax linux
> Server				PBX				Server
>
> And here are the session logs of each one, sender and receiver:
>  

> Mar 10 12:29:01.93: [ 4936]: REMOTE wants 14400 bit/s
> Mar 10 12:29:01.93: [ 4936]: REMOTE wants A4 page width (215 mm)
> Mar 10 12:29:01.93: [ 4936]: REMOTE wants unlimited page length
> Mar 10 12:29:01.93: [ 4936]: REMOTE wants 3.85 line/mm
> Mar 10 12:29:01.93: [ 4936]: REMOTE wants 1-D MH
> Mar 10 12:29:01.93: [ 4936]: RECV training at v.17 14400 bit/s
> Mar 10 12:29:01.93: [ 4936]: MODEM set XON/XOFF/DRAIN: input ignored,
>  

Why isn't ECM being used?  Is it disabled in the sender's config?  Are 
you sending with 'sendfax -E' ?

> PD: I've tried to connect directly from the server to the receiver with
> a cable, and use faxanswer but i haven't been able to make it work. The
> receiver never answers. Any idea? 
>
>  

Show us the session log of the receiver after you 'faxanswer'.

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*