Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] RECV/CQ: Bad 1D pixel count ...



On Wed, 2005-03-09 at 09:01 -0800, Lee Howard wrote:
> Diego Chaparro wrote:
> [...]
> >Mar 02 14:14:20.73: [ 2382]: <-- [9:AT+FTH=3\r]
> >Mar 02 14:14:20.89: [ 2382]: --> [7:CONNECT]
> >Mar 02 14:14:20.89: [ 2382]: RECV send MCF (message confirmation)
> >  
> The sender chose to not use ECM.  Unfortunately, then, you're at risk of 
> getting this kind of thing happening.

	Thanks for your answer, but is it normal to happen this kind of things?
I have the sender fax machine connected to the same pbx as the receiver
hylafax server separated by 3 meters of distance, and i always get these
errors in all faxes received. I have even tested with another hylafax
server to send the faxes instead of the fax machine but the errors are
the same. I've done a lot of tests, but i haven't received any fax
document without errors, is it normal?

	There is something i can do to improve it? Maybe the ECM in the modem
isn't working properly? A modem change can help with that problems, or
it is independent of the modem?

Sorry if these are silly questions, but i would like to improve the
quality of the received faxes. Sending it works perfectly.

Thanks again.

-- 
Diego Chaparro
Grupo de Sistemas y Comunicaciones
Universidad Rey Juan Carlos
C/ Tulipan s/n - 28933 Mostoles
dchaparro@xxxxxxxxxxxxxxxxxx  ||  dchaparro@xxxxxxx


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services