Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Answers with faxanswer but not with faxgetty, RingsBeforeAnswer: 2



I am stumped.

Using an Equinox Multi-modem Adapter with RHES 3 on an IBM box.  Using
hylafax from a Red Hat rpm, hylafax-4.1.8-1rhp.i386.rpm.

When I send a fax and use faxanswer ttyQ1a1 I get the fax emailed to me
as a pdf, but when I try have it work through faxgetty I don't get it.
The same thing happens when I configure the modem as Class 1 or Class 2.

When looking through the archives it seems that this car is similar to a
RocketModem II.  However in the logs it comes up as:
MODEM ROCKWELL AC/K56/V2.210-V90_2M_DLS

# ps -ef |grep fax
uucp      3552     1  0 10:19 ?        00:00:00 faxq
uucp      3556     1  0 10:19 ?        00:00:00 hfaxd -i hylafax
uucp      3564     1  0 10:19 ?        00:00:00 /usr/sbin/faxgetty
ttyQ1a1
root      3601  2616  0 11:05 pts/0    00:00:00 grep fax

dmesg output:
init_module()
Loading Equinox SuperSerial Technology Device Driver Version 4.07
Copyright (c) 1989-2004 Equinox Systems Inc. All Rights Reserved.
EQNX SST Board 0 : id 9898 (SST-MM8P)
EQUINOX: Multimodem board country code ID is 1
EQNX: Driver Enabled for 1 board(s).


/etc/inittab:
# faxgetty for hylafax
B1:2345:respawn:/usr/sbin/faxgetty ttyQ1a1

Here is my set up for Class 2:
----------------------------------------------------------------------------------
#
#
CountryCode:            1
AreaCode:               334
FAXNumber:              333.705.1787
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        etc/dialrules
ServerTracing:          527
SessionTracing:         527
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      2
SpeakerVolume:          low
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        Modem1
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class2          # use class 2 interface
ModemRate:              19200
ModemFlowControl:       xonxoff         # default
ModemWaitForConnect:    yes             # wait for CONNECT on answer
#
#ModemResetCmds:        AT&F2           # what you want for a Supra
ModemNoFlowCmd:         AT&K            # disable flow control cmd
ModemHardFlowCmd:       AT&K3           # hardware flow control cmd
ModemSoftFlowCmd:       AT&K4           # software flow control cmd
ModemSetupDTRCmd:       AT&D3           # DTR off causes modem to reset
ModemSetupDCDCmd:       AT&C1           # DCD follows carrier
--------------------------------------------------------------------------



Here is my set up for Class 3:
--------------------------------------------------------------------------
CountryCode:            1
AreaCode:               334
FAXNumber:              +1.334.705.1784
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        etc/dialrules
ServerTracing:          1
#SessionTracing:                11
SessionTracing:         0x00008
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          Low
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        Modem1
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class1          # use this to supply a hint
ModemRate:              19200           # rate for DCE-DTE communication
ModemFlowControl:       rtscts          # default
#
ModemNoFlowCmd:         AT&K0           # setup no flow control
ModemHardFlowCmd:       AT&K3           # setup hardware flow control
ModemSoftFlowCmd:       AT&K4           # setup software flow control
ModemSetupDTRCmd:       AT&D2           # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier
(or not)
#
ModemMfrQueryCmd:       !Rockwell
ModemModelQueryCmd:     !RC288DPi
ModemRevQueryCmd:       ATI3            # product information
#
ModemDialCmd:           ATDT%s          # T for tone dialing



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services