[hylafax-users] T.30 T2 timeout (arrgh)

[Rubin Bennett <rbennett@xxxxxxxxxxxxx>]

Well, after the RMIII issue, I "failed" back to the old server.  Didn't
change a darned thing, and now I'm getting T.30 T2 timeouts on the RMII
card.  I've tried changing ports on the card for lack of a better idea,
and even put the
Class1TCFRecvHack       yes
in the config file for that port.  I did that late last night, and to be
honest I haven't seen an error fax come in since, but there haven't been
that many faxes this AM.

I've inlined a log from one of the failed faxes (which their Exchange
server hacked to bits and I reconstituted):
Jan 20 16:50:41.92: [ 6132]: SESSION BEGIN 00044881 18022295669
Jan 20 16:50:41.92: [ 6132]: HylaFAX (tm) Version 4.1.5
Jan 20 16:50:41.92: [ 6132]: <-- [4:ATA\r]
Jan 20 16:50:47.40: [ 6132]: --> [7:CONNECT]
Jan 20 16:50:47.40: [ 6132]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyR4'
Jan 20 16:50:47.41: [ 6132]: RECV FAX: begin
Jan 20 16:50:49.08: [ 6132]: --> [7:CONNECT]
Jan 20 16:50:49.63: [ 6132]: --> [2:OK]
Jan 20 16:50:49.63: [ 6132]: <-- [9:AT+FRH=3\r]
Jan 20 16:50:50.21: [ 6132]: --> [7:CONNECT]
Jan 20 16:50:51.64: [ 6132]: --> [2:OK]
Jan 20 16:50:51.64: [ 6132]: REMOTE TSI "9-802-247-2707"
Jan 20 16:50:51.64: [ 6132]: <-- [9:AT+FRH=3\r]
Jan 20 16:50:51.66: [ 6132]: --> [7:CONNECT]
Jan 20 16:50:51.98: [ 6132]: --> [2:OK]
Jan 20 16:50:51.98: [ 6132]: REMOTE wants 14400 bit/s
Jan 20 16:50:51.98: [ 6132]: REMOTE wants page width 1728 pixels in 215
mm
Jan 20 16:50:51.98: [ 6132]: REMOTE wants unlimited page length
Jan 20 16:50:51.98: [ 6132]: REMOTE wants 3.85 line/mm
Jan 20 16:50:51.99: [ 6132]: REMOTE wants 2-D MR
Jan 20 16:50:51.99: [ 6132]: RECV training at v.17 14400 bit/s
Jan 20 16:50:51.99: [ 6132]: <-- [11:AT+FRM=145\r]
Jan 20 16:50:53.69: [ 6132]: --> [7:CONNECT]
Jan 20 16:50:55.22: [ 6132]: RECV: TCF 2711 bytes, 1% non-zero, 2665
zero-run
Jan 20 16:50:55.22: [ 6132]: --> [10:NO CARRIER]
Jan 20 16:50:55.23: [ 6132]: DELAY 75 ms
Jan 20 16:50:55.31: [ 6132]: TRAINING succeeded
Jan 20 16:50:55.31: [ 6132]: <-- [9:AT+FTH=3\r]
Jan 20 16:50:55.36: [ 6132]: --> [7:CONNECT]
Jan 20 16:50:56.67: [ 6132]: --> [2:OK]
Jan 20 16:50:56.67: [ 6132]: <-- [11:AT+FRM=146\r]
Jan 20 16:50:57.88: [ 6132]: --> [8:+FCERROR]
Jan 20 16:50:57.88: [ 6132]: <-- [9:AT+FRH=3\r]
Jan 20 16:51:04.88: [ 6132]: --> [0:]
Jan 20 16:51:04.88: [ 6132]: MODEM <Empty line>
Jan 20 16:51:04.93: [ 6132]: --> [2:OK]
Jan 20 16:51:04.93: [ 6132]: RECV FAX (00044881): recvq/fax44909.tif
from 9-802-247-2707, route to <unspecified>, 0 pages in 0:17
Jan 20 16:51:04.94: [ 6132]: RECV FAX: T.30 T2 timeout, expected page
not received
Jan 20 16:51:04.94: [ 6132]: <-- [9:AT+FTH=3\r]
Jan 20 16:51:04.98: [ 6132]: --> [7:CONNECT]
Jan 20 16:51:06.30: [ 6132]: --> [2:OK]
Jan 20 16:51:06.31: [ 6132]: RECV FAX (00044881): session with
9-802-247-2707 terminated abnormally: T.30 T2 timeout, expected page not
received
Jan 20 16:51:06.31: [ 6132]: RECV FAX: bin/faxrcvd "recvq/fax44909.tif"
"ttyR4" "00044881" "T.30 T2 timeout, expected page not received" "" ""

Thanks again in advance!
Rubin
-- 
Rubin Bennett
RB Technologies
http://thatitguy.com
rbennett@xxxxxxxxxxxxx
(802)223-4448

"They that can give up essential liberty to obtain a little
temporary security deserve neither liberty nor safety"
  --Benjamin Franklin, Historical Review of Pennsylvania, 1759

Attachment: signature.asc
Description: This is a digitally signed message part