|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Partial pages received
Hello,
I am using
Redhat 9
hylafax 4.20
USR sportster 33.6 external
I am getting partial pages, and it appears all from the same machine.
The full page gets through on the second or third retry.
I also get about 6 errors out of 100 pages received, and it appears they
are all from that same machine.
here is one of the root usage reports:
Sender CIDName CIDNumber Pages Time Pg/min
Errs TypRate TypData
30 21:44 1.4 4 9600 1-D MH
2xxxxxxxxxxx 1
0:36 1.7 0 9600 1-D MH
927xxxxxxxxxxxxxx 16
7:56 2.0 0 14400 1-D MH
____________________________________________________________________
Total
47 30:16 1.6 4
I rarely get errors with 2-D MMR, maybe 1 out of 200~300 pages.
Here is the log of the latest partial page job:
Dec 21 00:31:42.20: [ 3008]: SESSION BEGIN 000000049 1xxxxxxx8418
Dec 21 00:31:42.20: [ 3008]: HylaFAX (tm) Version 4.2.0
Dec 21 00:31:42.20: [ 3008]: <-- [13:AT+FCLASS=1A\r]
Dec 21 00:31:43.44: [ 3008]: --> [3:FAX]
Dec 21 00:31:43.44: [ 3008]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS1'
Dec 21 00:31:43.44: [ 3008]: RECV FAX: begin
Dec 21 00:31:43.44: [ 3008]: <-- data [32]
Dec 21 00:31:43.44: [ 3008]: <-- data [2]
Dec 21 00:31:46.01: [ 3008]: --> [7:CONNECT]
Dec 21 00:31:46.01: [ 3008]: <-- data [23]
Dec 21 00:31:46.01: [ 3008]: <-- data [2]
Dec 21 00:31:47.74: [ 3008]: --> [2:OK]
Dec 21 00:31:47.74: [ 3008]: DELAY 1500 ms
Dec 21 00:31:49.24: [ 3008]: <-- [9:AT+FTH=3\r]
Dec 21 00:31:49.28: [ 3008]: --> [7:CONNECT]
Dec 21 00:31:49.28: [ 3008]: <-- data [32]
Dec 21 00:31:49.28: [ 3008]: <-- data [2]
Dec 21 00:31:49.44: [ 3008]: --> [7:CONNECT]
Dec 21 00:31:49.44: [ 3008]: <-- data [23]
Dec 21 00:31:49.44: [ 3008]: <-- data [2]
Dec 21 00:31:50.16: [ 3008]: --> [7:CONNECT]
Dec 21 00:31:50.16: [ 3008]: <-- data [10]
Dec 21 00:31:50.16: [ 3008]: <-- data [2]
Dec 21 00:31:52.35: [ 3008]: --> [2:OK]
Dec 21 00:31:52.35: [ 3008]: <-- [9:AT+FRH=3\r]
Dec 21 00:31:55.45: [ 3008]: --> [0:]
Dec 21 00:31:55.45: [ 3008]: MODEM <Empty line>
Dec 21 00:31:55.45: [ 3008]: <-- data [1]
Dec 21 00:31:55.46: [ 3008]: --> [2:OK]
Dec 21 00:31:55.46: [ 3008]: DELAY 1500 ms
Dec 21 00:31:56.96: [ 3008]: <-- [9:AT+FTH=3\r]
Dec 21 00:31:57.00: [ 3008]: --> [7:CONNECT]
Dec 21 00:31:57.00: [ 3008]: <-- data [32]
Dec 21 00:31:57.00: [ 3008]: <-- data [2]
Dec 21 00:31:57.16: [ 3008]: --> [7:CONNECT]
Dec 21 00:31:57.16: [ 3008]: <-- data [23]
Dec 21 00:31:57.16: [ 3008]: <-- data [2]
Dec 21 00:31:57.88: [ 3008]: --> [7:CONNECT]
Dec 21 00:31:57.88: [ 3008]: <-- data [10]
Dec 21 00:31:57.88: [ 3008]: <-- data [2]
Dec 21 00:32:00.07: [ 3008]: --> [2:OK]
Dec 21 00:32:00.07: [ 3008]: <-- [9:AT+FRH=3\r]
Dec 21 00:32:00.79: [ 3008]: --> [7:CONNECT]
Dec 21 00:32:02.10: [ 3008]: --> [2:OK]
Dec 21 00:32:02.10: [ 3008]: REMOTE TSI ""
Dec 21 00:32:02.10: [ 3008]: <-- [9:AT+FRH=3\r]
Dec 21 00:32:02.12: [ 3008]: --> [7:CONNECT]
Dec 21 00:32:02.53: [ 3008]: --> [2:OK]
Dec 21 00:32:02.53: [ 3008]: REMOTE wants 9600 bit/s
Dec 21 00:32:02.53: [ 3008]: REMOTE wants A4 page width (215 mm)
Dec 21 00:32:02.53: [ 3008]: REMOTE wants unlimited page length
Dec 21 00:32:02.53: [ 3008]: REMOTE wants 3.85 line/mm
Dec 21 00:32:02.53: [ 3008]: REMOTE wants 1-D MH
Dec 21 00:32:02.53: [ 3008]: RECV training at v.29 9600 bit/s
Dec 21 00:32:02.53: [ 3008]: <-- [10:AT+FRM=96\r]
Dec 21 00:32:03.21: [ 3008]: --> [7:CONNECT]
Dec 21 00:32:04.78: [ 3008]: RECV: TCF 1893 bytes, 6% non-zero, 1764
zero-run
Dec 21 00:32:04.79: [ 3008]: --> [10:NO CARRIER]
Dec 21 00:32:04.79: [ 3008]: DELAY 75 ms
Dec 21 00:32:04.87: [ 3008]: TRAINING succeeded
Dec 21 00:32:04.87: [ 3008]: <-- [9:AT+FTH=3\r]
Dec 21 00:32:05.07: [ 3008]: --> [7:CONNECT]
Dec 21 00:32:05.07: [ 3008]: <-- data [3]
Dec 21 00:32:05.07: [ 3008]: <-- data [2]
Dec 21 00:32:06.25: [ 3008]: --> [2:OK]
Dec 21 00:32:06.25: [ 3008]: <-- [10:AT+FRM=96\r]
Dec 21 00:32:07.15: [ 3008]: --> [7:CONNECT]
Dec 21 00:32:07.15: [ 3008]: RECV: begin page
Dec 21 00:32:17.68: [ 3008]: RECV: 473 total lines, 4 bad lines, 1
consecutive bad lines
Dec 21 00:32:17.68: [ 3008]: RECV: end page
Dec 21 00:32:17.68: [ 3008]: --> [10:NO CARRIER]
Dec 21 00:32:17.68: [ 3008]: <-- [9:AT+FRH=3\r]
Dec 21 00:32:23.15: [ 3008]: --> [7:CONNECT]
Dec 21 00:32:28.15: [ 3008]: <-- data [1]
Dec 21 00:32:28.26: [ 3008]: --> [2:OK]
Dec 21 00:32:28.26: [ 3008]: RECV keeping unconfirmed page
Dec 21 00:32:28.26: [ 3008]: RECV FAX (000000049): from , page 1 in
0:24, INF, 3.85 line/mm, 1-D MH, 9600 bit/s
Dec 21 00:32:28.26: [ 3008]: RECV FAX (000000049):
recvq/fax000000022.tif from , route to <unspecified>, 1 pages in 0:45
Dec 21 00:32:28.26: [ 3008]: RECV FAX: T.30 T2 timeout, expected page
not received
Dec 21 00:32:28.26: [ 3008]: <-- [9:AT+FTH=3\r]
Dec 21 00:32:28.40: [ 3008]: --> [7:CONNECT]
Dec 21 00:32:28.40: [ 3008]: <-- data [3]
Dec 21 00:32:28.40: [ 3008]: <-- data [2]
Dec 21 00:32:29.58: [ 3008]: --> [2:OK]
Dec 21 00:32:29.58: [ 3008]: RECV FAX (000000049): session with
terminated abnormally: T.30 T2 timeout, expected page not received
Dec 21 00:32:29.58: [ 3008]: RECV FAX: bin/faxrcvd
"recvq/fax000000022.tif" "ttyS1" "000000049" "T.30 T2 timeout, expected
page not received" "" ""
Dec 21 00:32:29.59: [ 3008]: RECV FAX: end
Dec 21 00:32:29.59: [ 3008]: SESSION END
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
