[hylafax-users] AW: AW: Hylafax very unstable

[erich.iseli@xxxxxxxxxxxxxxxx]

Title: AW: [hylafax-users] AW: Hylafax very unstable

Hi Lee,

I'm using an ELSA MicroLink ISDN/TL V.34. I'm using class 2.0 because the modem appears to be a class 2.0, and when configuring it with faxaddmodem, it says "Hmm, this looks like a Class 2.0 modem." Is there a reason why I shouldn't do that?

I've also tried to configure it as a class 1 modem, but it wouldn't work. However, I can give it another try if you tell me there are chances it will be more stable as a class 1 modem.

Erich

-----Ursprüngliche Nachricht-----
Von: Lee Howard [mailto:faxguy@xxxxxxxxxxxxxxxx]
Gesendet: Dienstag, 30. November 2004 17:07
An: erich.iseli@xxxxxxxxxxxxxxxx
Cc: hylafax-users@xxxxxxxxxxx
Betreff: Re: [hylafax-users] AW: Hylafax very unstable

On 2004.11.30 00:01 erich.iseli@xxxxxxxxxxxxxxxx wrote:

> Nov 29 16:57:08.90: [16366]: <-- data [1025]
> Nov 29 16:58:28.90: [16366]: MODEM WRITE SHORT: sent 1025, wrote 232
> Nov 29 16:58:28.90: [16366]: SENT 44111 bytes of data
> Nov 29 16:58:28.90: [16366]: SEND abort data transfer
> Nov 29 16:58:28.90: [16366]: <-- data [1]

> Nov 29 17:25:34.21: [16366]: SEND end page
> Nov 29 17:25:34.21: [16366]: <-- [7:AT+FKS\r]
> Nov 29 17:26:04.21: [16366]: MODEM <Timeout>
> Nov 29 17:26:04.21: [16366]: <-- [5:ATH0\r]
> Nov 29 17:26:09.21: [16366]: MODEM <Timeout>

> Nov 29 17:49:02.86: [16366]: SESSION END

What kind of modem are you using and why are you using Class 2?

It looks to me to be a modem driver problem at first, but it's possible
that HylaFAX itself is getting stuck.

Lee.