|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Problem with a Devolo Micolink 56k FunII
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi list,
after my good old Multitech broke down, I had to get a new modem.
I bought a Devolo Microlink 56k FunII Class 1 modem.
(It's only Class 1)
I set it up and after a few minutes it worked fine,
receiving of hundreds of faxes works fine, Sending was also no problem,
until I checked the logs.
This modems seems to have a problem with Brother-Fax-machines.
The error is always:
Failure to train remote modem at 2400 bps or minimum speed
I found hundreds of pages with this error in the mail-archives
I read most of the pages and tried a few things to get rid of this error, but
no success.
Maybe someone has an idea
I'm running a debian-woody-box with Version 4.1.8
Here is the output of probemodem ttyUSB2:
Probing for best speed to talk to modem: 38400 OK.
This looks like a Class 1 and 1.0 modem.
ATI0 RESULT = "OK" RESPONSE = "645"
ATI1 RESULT = "OK" RESPONSE = "042"
ATI2 RESULT = "OK" RESPONSE = "OK"
ATI3 RESULT = "OK" RESPONSE = "Version 1.21 / 31.05.2002"
ATI4 RESULT = "OK" RESPONSE = " E1 L2 M0 Q0 V1 X3"
ATI5 RESULT = "OK" RESPONSE = "OK"
ATI6 RESULT = "OK" RESPONSE = "MicroLink 56k Fun II"
ATI7 RESULT = "OK" RESPONSE = "OK"
ATI8 RESULT = "OK" RESPONSE = "OK"
ATI9 RESULT = "OK" RESPONSE = "(#DVL1262\89023456\MODEM\MicroLink 56k Fun
II00)"
Class 1 stuff...
AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,1.0,8,8.0"
AT+FCLASS? RESULT = "OK" RESPONSE = "1"
AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS? RESULT = "OK" RESPONSE = "1"
AT+FJUNK=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FJUNK? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FAA=? RESULT = "OK" RESPONSE = "(0-1)"
AT+FAA? RESULT = "OK" RESPONSE = "0"
AT+FAE=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FAE? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FTH=? RESULT = "OK" RESPONSE =
"(3,24,48,72,73,74,96,97,98,121,122,145,146)"
AT+FRH=? RESULT = "OK" RESPONSE =
"(3,24,48,72,73,74,96,97,98,121,122,145,146)"
AT+FTM=? RESULT = "OK" RESPONSE =
"(3,24,48,72,73,74,96,97,98,121,122,145,146)"
AT+FRM=? RESULT = "OK" RESPONSE =
"(3,24,48,72,73,74,96,97,98,121,122,145,146)"
AT+FTS=? RESULT = "OK" RESPONSE = "(0-255)"
AT+FRS=? RESULT = "OK" RESPONSE = "(0-255)"
Class 1.0 stuff...
AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,1.0,8,8.0"
AT+FCLASS? RESULT = "OK" RESPONSE = "1"
AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS=1.0 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS? RESULT = "OK" RESPONSE = "1.0"
AT+FJUNK=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FJUNK? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FAA=? RESULT = "OK" RESPONSE = "(0-1)"
AT+FAA? RESULT = "OK" RESPONSE = "0"
AT+FAE=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FAE? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FTH=? RESULT = "OK" RESPONSE =
"(3,24,48,72,73,74,96,97,98,121,122,145,146)"
AT+FRH=? RESULT = "OK" RESPONSE =
"(3,24,48,72,73,74,96,97,98,121,122,145,146)"
AT+FTM=? RESULT = "OK" RESPONSE =
"(3,24,48,72,73,74,96,97,98,121,122,145,146)"
AT+FRM=? RESULT = "OK" RESPONSE =
"(3,24,48,72,73,74,96,97,98,121,122,145,146)"
AT+FTS=? RESULT = "OK" RESPONSE = "(0-255)"
AT+FRS=? RESULT = "OK" RESPONSE = "(0-255)"
Here the relevant part of the config-file:
ModemType: Class1 # use this to supply a hint
ModemRate: 38400 # lock rate for DCE-DTE communication
ModemFlowControl: rtscts # default
ModemResetCmds: "ATZ ATX3 ATS0=2"
ModemDialCmd: ATDT0,%s
Class1Cmd: AT+FCLASS=1 # command to enter class 1
Class1PPMWaitCmd: AT+FTS=7 # command to stop and wait before PPM
Class1TCFWaitCmd: AT+FTS=7 # command to stop and wait before TCF
Class1EOPWaitCmd: AT+FTS=9 # command to stop and wait before EOP
Class1MsgRecvHackCmd: "" # command to avoid +FCERROR before image
Class1TCFResponseDelay: 75 # 75ms delay between recv TCF & response
Class1SendMsgDelay: 75 # 75ms delay after training
Class1SwitchingCmd: "<delay:7>"
Class1TrainingRecovery: 1500 # 1.5sec delay after training failure
Class1RecvAbortOK: 200 # wait 200ms for abort response
Class1FrameOverhead: 4 # 4 byte overhead in recvd HDLC frames
Class1RecvIdentTimer: 40000 # 35+5secs waiting for ident frames
Class1TCFMaxNonZero: 10 # max 10% of data may be non-zero
Class1TCFMinRun: 1000 # min run is 2/3rds of TCF duration
Here is the output of the log:
Nov 16 13:22:34.37: [13140]: SESSION BEGIN 00017782 495222941852
Nov 16 13:22:34.37: [13140]: HylaFAX (tm) Version 4.1.8
Nov 16 13:22:34.37: [13140]: SEND FAX: JOB 11890 DEST 05222941852 COMMID
00017782 DEVICE '/dev/ttyUSB2'
Nov 16 13:22:34.37: [13140]: MODEM set DTR OFF
Nov 16 13:22:34.37: [13140]: DELAY 75 ms
Nov 16 13:22:34.45: [13140]: MODEM set DTR ON
Nov 16 13:22:34.45: [13140]: DELAY 2600 ms
Nov 16 13:22:38.07: [13140]: MODEM set baud rate: 38400 baud, input flow
RTS/CTS, output flow RTS/CTS
Nov 16 13:22:38.30: [13140]: DELAY 10 ms
Nov 16 13:22:38.31: [13140]: MODEM flush i/o
Nov 16 13:22:38.31: [13140]: <-- [4:ATZ\r]
Nov 16 13:22:38.32: [13140]: --> [2:OK]
Nov 16 13:22:38.32: [13140]: DELAY 3000 ms
Nov 16 13:22:41.31: [13140]: <-- [16:ATZ ATX3 ATS0=2\r]
Nov 16 13:22:41.32: [13140]: --> [15:ATZ ATX3 ATS0=2]
Nov 16 13:22:41.32: [13140]: --> [2:OK]
Nov 16 13:22:41.32: [13140]: <-- [5:ATE0\r]
Nov 16 13:22:41.34: [13140]: --> [4:ATE0]
Nov 16 13:22:41.34: [13140]: --> [2:OK]
Nov 16 13:22:41.34: [13140]: <-- [5:ATV1\r]
Nov 16 13:22:41.35: [13140]: --> [2:OK]
Nov 16 13:22:41.35: [13140]: <-- [5:ATQ0\r]
Nov 16 13:22:41.37: [13140]: --> [2:OK]
Nov 16 13:22:41.37: [13140]: <-- [7:ATS0=0\r]
Nov 16 13:22:41.38: [13140]: --> [2:OK]
Nov 16 13:22:41.38: [13140]: <-- [7:ATS8=2\r]
Nov 16 13:22:41.40: [13140]: --> [2:OK]
Nov 16 13:22:41.40: [13140]: <-- [8:ATS7=60\r]
Nov 16 13:22:41.41: [13140]: --> [2:OK]
Nov 16 13:22:41.41: [13140]: <-- [12:AT+FCLASS=1\r]
Nov 16 13:22:41.43: [13140]: --> [2:OK]
Nov 16 13:22:41.43: [13140]: <-- [5:ATM0\r]
Nov 16 13:22:41.45: [13140]: --> [2:OK]
Nov 16 13:22:41.45: [13140]: MODEM input buffering enabled
Nov 16 13:22:41.45: [13140]: <-- [12:AT+FCLASS=1\r]
Nov 16 13:22:41.56: [13140]: --> [2:OK]
Nov 16 13:22:41.59: [13140]: DIAL 05222941852
Nov 16 13:22:41.59: [13140]: <-- [18:ATDT0,05222941852\r]
Nov 16 13:22:56.23: [13140]: --> [7:CONNECT]
Nov 16 13:22:56.23: [13140]: MODEM input buffering disabled
Nov 16 13:22:57.37: [13140]: --> HDLC<16:FF C0 04 00 00 6A AA AA 00 31 09 01
B9 60 94 07>
Nov 16 13:22:57.37: [13140]: --> [2:OK]
Nov 16 13:22:57.39: [13140]: REMOTE NSF "00 00 56 55 55 00 8C 90 80 9D 06 29"
Nov 16 13:22:57.39: [13140]: NSF remote fax equipment: Brother
Nov 16 13:22:57.39: [13140]: <-- [9:AT+FRH=3\r]
Nov 16 13:22:57.41: [13140]: --> [7:CONNECT]
Nov 16 13:22:58.07: [13140]: --> HDLC<25:FF C0 02 4C AC 1C 8C 2C 9C 04 4C 4C
4C AC 04 9C 2C D4 04 04 04 04 04 B9 E5>
Nov 16 13:22:58.07: [13140]: --> [2:OK]
Nov 16 13:22:58.07: [13140]: REMOTE CSI "+49 5222 941852"
Nov 16 13:22:58.07: [13140]: <-- [9:AT+FRH=3\r]
Nov 16 13:22:58.09: [13140]: --> [7:CONNECT]
Nov 16 13:22:58.52: [13140]: --> HDLC<15:FF C8 01 04 77 15 23 01 89 01 01 01
04 FF 0B>
Nov 16 13:22:58.52: [13140]: --> [2:OK]
Nov 16 13:22:58.52: [13140]: REMOTE best rate 33600 bit/s
Nov 16 13:22:58.52: [13140]: REMOTE max page width 1728 pixels in 215 mm
Nov 16 13:22:58.52: [13140]: REMOTE max unlimited page length
Nov 16 13:22:58.52: [13140]: REMOTE best vres 7.7 line/mm
Nov 16 13:22:58.52: [13140]: REMOTE best format 2-D MMR
Nov 16 13:22:58.52: [13140]: REMOTE supports T.30 Annex A, ECM
Nov 16 13:22:58.52: [13140]: REMOTE best 10 ms/scanline
Nov 16 13:22:58.52: [13140]: USE 14400 bit/s
Nov 16 13:22:58.52: [13140]: USE 10 ms/scanline
Nov 16 13:22:58.52: [13140]: SEND file "docq/doc11948.ps;00"
Nov 16 13:22:58.52: [13140]: USE page width 1728 pixels in 215 mm
Nov 16 13:22:58.52: [13140]: USE unlimited page length
Nov 16 13:22:58.52: [13140]: USE 3.85 line/mm
Nov 16 13:22:58.52: [13140]: USE 1-D MR
Nov 16 13:22:58.52: [13140]: SEND training at v.17 14400 bit/s
Nov 16 13:22:58.52: [13140]: <-- [9:AT+FTH=3\r]
Nov 16 13:22:58.62: [13140]: --> [7:CONNECT]
Nov 16 13:22:58.62: [13140]: <-- HDLC<23:FF C0 C2 2A 4A 82 E2 2A 2A AA 2A CA
04 E2 A2 04 CA F2 E2 82 12 04 04>
Nov 16 13:22:58.62: [13140]: <-- data [23]
Nov 16 13:22:58.62: [13140]: <-- data [2]
Nov 16 13:22:59.62: [13140]: --> [7:CONNECT]
Nov 16 13:22:59.62: [13140]: <-- HDLC<6:FF C8 C1 00 44 14>
Nov 16 13:22:59.62: [13140]: <-- data [6]
Nov 16 13:22:59.62: [13140]: <-- data [2]
Nov 16 13:23:00.64: [13140]: --> [2:OK]
Nov 16 13:23:00.64: [13140]: <-- [9:AT+FTS=7\r]
Nov 16 13:23:00.72: [13140]: --> [2:OK]
Nov 16 13:23:00.72: [13140]: <-- [11:AT+FTM=145\r]
Nov 16 13:23:02.16: [13140]: --> [7:CONNECT]
Nov 16 13:23:02.16: [13140]: <-- data [1024]
Nov 16 13:23:02.16: [13140]: <-- data [1024]
Nov 16 13:23:02.16: [13140]: <-- data [652]
Nov 16 13:23:02.31: [13140]: <-- data [2]
Nov 16 13:23:03.82: [13140]: --> [2:OK]
Nov 16 13:23:03.82: [13140]: <-- [9:AT+FRH=3\r]
Nov 16 13:23:04.14: [13140]: --> [7:CONNECT]
Nov 16 13:23:05.14: [13140]: --> HDLC<5:FF C8 22 67 DD>
Nov 16 13:23:05.14: [13140]: --> [2:OK]
Nov 16 13:23:05.14: [13140]: SEND training at v.17 12000 bit/s
Nov 16 13:23:05.14: [13140]: <-- [9:AT+FTH=3\r]
Nov 16 13:23:05.26: [13140]: --> [7:CONNECT]
Nov 16 13:23:05.26: [13140]: <-- HDLC<23:FF C0 C2 2A 4A 82 E2 2A 2A AA 2A CA
04 E2 A2 04 CA F2 E2 82 12 04 04>
Nov 16 13:23:05.26: [13140]: <-- data [23]
Nov 16 13:23:05.26: [13140]: <-- data [2]
Nov 16 13:23:06.26: [13140]: --> [7:CONNECT]
Nov 16 13:23:06.26: [13140]: <-- HDLC<6:FF C8 C1 00 54 14>
Nov 16 13:23:06.26: [13140]: <-- data [6]
Nov 16 13:23:06.26: [13140]: <-- data [2]
Nov 16 13:23:07.28: [13140]: --> [2:OK]
Nov 16 13:23:07.28: [13140]: <-- [9:AT+FTS=7\r]
Nov 16 13:23:07.36: [13140]: --> [2:OK]
Nov 16 13:23:07.36: [13140]: <-- [11:AT+FTM=121\r]
Nov 16 13:23:08.80: [13140]: --> [7:CONNECT]
Nov 16 13:23:08.80: [13140]: <-- data [1024]
Nov 16 13:23:08.80: [13140]: <-- data [1024]
Nov 16 13:23:08.80: [13140]: <-- data [202]
Nov 16 13:23:08.83: [13140]: <-- data [2]
Nov 16 13:23:10.47: [13140]: --> [2:OK]
Nov 16 13:23:10.47: [13140]: <-- [9:AT+FRH=3\r]
Nov 16 13:23:10.82: [13140]: --> [7:CONNECT]
Nov 16 13:23:11.77: [13140]: --> HDLC<5:FF C8 22 67 DD>
Nov 16 13:23:11.77: [13140]: --> [2:OK]
Nov 16 13:23:11.77: [13140]: SEND training at v.17 9600 bit/s
Nov 16 13:23:11.77: [13140]: <-- [9:AT+FTH=3\r]
Nov 16 13:23:11.91: [13140]: --> [7:CONNECT]
Nov 16 13:23:11.91: [13140]: <-- HDLC<23:FF C0 C2 2A 4A 82 E2 2A 2A AA 2A CA
04 E2 A2 04 CA F2 E2 82 12 04 04>
Nov 16 13:23:11.91: [13140]: <-- data [23]
Nov 16 13:23:11.91: [13140]: <-- data [2]
Nov 16 13:23:12.91: [13140]: --> [7:CONNECT]
Nov 16 13:23:12.91: [13140]: <-- HDLC<6:FF C8 C1 00 64 14>
Nov 16 13:23:12.91: [13140]: <-- data [6]
Nov 16 13:23:12.91: [13140]: <-- data [2]
Nov 16 13:23:13.93: [13140]: --> [2:OK]
Nov 16 13:23:13.93: [13140]: <-- [9:AT+FTS=7\r]
Nov 16 13:23:14.01: [13140]: --> [2:OK]
Nov 16 13:23:14.01: [13140]: <-- [10:AT+FTM=97\r]
Nov 16 13:23:15.45: [13140]: --> [7:CONNECT]
Nov 16 13:23:15.45: [13140]: <-- data [1024]
Nov 16 13:23:15.45: [13140]: <-- data [776]
Nov 16 13:23:15.45: [13140]: <-- data [2]
Nov 16 13:23:17.12: [13140]: --> [2:OK]
Nov 16 13:23:17.12: [13140]: <-- [9:AT+FRH=3\r]
Nov 16 13:23:17.46: [13140]: --> [7:CONNECT]
Nov 16 13:23:18.41: [13140]: --> HDLC<5:FF C8 22 67 DD>
Nov 16 13:23:18.41: [13140]: --> [2:OK]
Nov 16 13:23:18.41: [13140]: SEND training at v.17 7200 bit/s
Nov 16 13:23:18.41: [13140]: <-- [9:AT+FTH=3\r]
Nov 16 13:23:18.56: [13140]: --> [7:CONNECT]
Nov 16 13:23:18.56: [13140]: <-- HDLC<23:FF C0 C2 2A 4A 82 E2 2A 2A AA 2A CA
04 E2 A2 04 CA F2 E2 82 12 04 04>
Nov 16 13:23:18.56: [13140]: <-- data [23]
Nov 16 13:23:18.56: [13140]: <-- data [2]
Nov 16 13:23:19.55: [13140]: --> [7:CONNECT]
Nov 16 13:23:19.55: [13140]: <-- HDLC<6:FF C8 C1 00 74 14>
Nov 16 13:23:19.55: [13140]: <-- data [6]
Nov 16 13:23:19.55: [13140]: <-- data [2]
Nov 16 13:23:20.58: [13140]: --> [2:OK]
Nov 16 13:23:20.58: [13140]: <-- [9:AT+FTS=7\r]
Nov 16 13:23:20.66: [13140]: --> [2:OK]
Nov 16 13:23:20.66: [13140]: <-- [10:AT+FTM=73\r]
Nov 16 13:23:22.09: [13140]: --> [7:CONNECT]
Nov 16 13:23:22.09: [13140]: <-- data [1024]
Nov 16 13:23:22.09: [13140]: <-- data [326]
Nov 16 13:23:22.09: [13140]: <-- data [2]
Nov 16 13:23:23.77: [13140]: --> [2:OK]
Nov 16 13:23:23.77: [13140]: <-- [9:AT+FRH=3\r]
Nov 16 13:23:24.10: [13140]: --> [7:CONNECT]
Nov 16 13:23:25.07: [13140]: --> HDLC<5:FF C8 22 67 DD>
Nov 16 13:23:25.07: [13140]: --> [2:OK]
Nov 16 13:23:25.07: [13140]: SEND training at v.27ter 4800 bit/s
Nov 16 13:23:25.07: [13140]: <-- [9:AT+FTH=3\r]
Nov 16 13:23:25.20: [13140]: --> [7:CONNECT]
Nov 16 13:23:25.20: [13140]: <-- HDLC<23:FF C0 C2 2A 4A 82 E2 2A 2A AA 2A CA
04 E2 A2 04 CA F2 E2 82 12 04 04>
Nov 16 13:23:25.20: [13140]: <-- data [23]
Nov 16 13:23:25.20: [13140]: <-- data [2]
Nov 16 13:23:26.19: [13140]: --> [7:CONNECT]
Nov 16 13:23:26.19: [13140]: <-- HDLC<6:FF C8 C1 00 50 14>
Nov 16 13:23:26.19: [13140]: <-- data [6]
Nov 16 13:23:26.19: [13140]: <-- data [2]
Nov 16 13:23:27.22: [13140]: --> [2:OK]
Nov 16 13:23:27.22: [13140]: <-- [9:AT+FTS=7\r]
Nov 16 13:23:27.30: [13140]: --> [2:OK]
Nov 16 13:23:27.30: [13140]: <-- [10:AT+FTM=48\r]
Nov 16 13:23:28.26: [13140]: --> [7:CONNECT]
Nov 16 13:23:28.26: [13140]: <-- data [900]
Nov 16 13:23:28.26: [13140]: <-- data [2]
Nov 16 13:23:29.95: [13140]: --> [2:OK]
Nov 16 13:23:29.95: [13140]: <-- [9:AT+FRH=3\r]
Nov 16 13:23:30.27: [13140]: --> [7:CONNECT]
Nov 16 13:23:31.24: [13140]: --> HDLC<5:FF C8 22 67 DD>
Nov 16 13:23:31.24: [13140]: --> [2:OK]
Nov 16 13:23:31.24: [13140]: SEND training at v.27ter fallback mode 2400 bit/s
Nov 16 13:23:31.24: [13140]: <-- [9:AT+FTH=3\r]
Nov 16 13:23:31.37: [13140]: --> [7:CONNECT]
Nov 16 13:23:31.37: [13140]: <-- HDLC<23:FF C0 C2 2A 4A 82 E2 2A 2A AA 2A CA
04 E2 A2 04 CA F2 E2 82 12 04 04>
Nov 16 13:23:31.37: [13140]: <-- data [23]
Nov 16 13:23:31.37: [13140]: <-- data [2]
Nov 16 13:23:32.37: [13140]: --> [7:CONNECT]
Nov 16 13:23:32.37: [13140]: <-- HDLC<6:FF C8 C1 00 40 14>
Nov 16 13:23:32.37: [13140]: <-- data [6]
Nov 16 13:23:32.37: [13140]: <-- data [2]
Nov 16 13:23:33.39: [13140]: --> [2:OK]
Nov 16 13:23:33.39: [13140]: <-- [9:AT+FTS=7\r]
Nov 16 13:23:33.47: [13140]: --> [2:OK]
Nov 16 13:23:33.47: [13140]: <-- [10:AT+FTM=24\r]
Nov 16 13:23:34.67: [13140]: --> [7:CONNECT]
Nov 16 13:23:34.67: [13140]: <-- data [450]
Nov 16 13:23:34.67: [13140]: <-- data [2]
Nov 16 13:23:36.40: [13140]: --> [2:OK]
Nov 16 13:23:36.40: [13140]: <-- [9:AT+FRH=3\r]
Nov 16 13:23:36.73: [13140]: --> [7:CONNECT]
Nov 16 13:23:37.65: [13140]: --> HDLC<5:FF C8 22 67 DD>
Nov 16 13:23:37.65: [13140]: --> [2:OK]
Nov 16 13:23:37.65: [13140]: TRAINING failed
Nov 16 13:23:37.65: [13140]: <-- [9:AT+FTH=3\r]
Nov 16 13:23:37.79: [13140]: --> [7:CONNECT]
Nov 16 13:23:37.79: [13140]: <-- HDLC<3:FF C8 DF>
Nov 16 13:23:37.79: [13140]: <-- data [3]
Nov 16 13:23:37.79: [13140]: <-- data [2]
Nov 16 13:23:39.03: [13140]: --> [2:OK]
Nov 16 13:23:39.03: [13140]: MODEM input buffering enabled
Nov 16 13:23:39.04: [13140]: <-- [5:ATH0\r]
Nov 16 13:23:39.34: [13140]: --> [2:OK]
Nov 16 13:23:39.34: [13140]: MODEM set DTR OFF
Nov 16 13:23:39.41: [13140]: SESSION END
Maybe someone has an idea or a working config-file
TIA to all
- --
HAGOS eG phone: +49 711 7880592
Matthias Reich fax: +49 711 7880535
Industriestr. 62 web: http://www.hagos.de
D-70565 Stuttgart mail: rei@xxxxxxxx
Germany
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFBmfuccjMVLPQ5oUkRAs3EAJwJJPjXD5dZr00NxW/q6oJ5bclzagCeL3mQ
nEHQbT/9jhSPsF9jNYXjWUc=
=7qa7
-----END PGP SIGNATURE-----
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
