|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Defining the MaxDials Parameter hylafax-4.2.0-1rh7 (RH7.3)
Probably you want use this according with the
destination. See man destctrls
--- Shaun McCullagh <shaun@xxxxxxxxxx> wrote:
> Hi,
>
> I finally figured this out. In my original message I
> should nhave
> explained that I only use sendfax.
>
> sendfax reads a config file called
> /etc/hylafax/sendfax.conf
>
> So
>
> echo "MaxDials: 24" >
> /etc/hylafax/sendfax.conf
>
>
> Bingo Hylafax now tries to dial a remote fax 24
> times before aborting
> the job....
>
> Shaun
>
> >
> >
> >>Hi,
> >>
> >>I would like HylaFax to make 24 attempts to send a
> >>fax, but currently
> >>it will not make more than 12 attempts. Here is my
> >>config file:
> >>
> >>/etc/hylafax/etc/config
> >>LogFacility: local2
> >>CountryCode: 31
> >>AreaCode: 20
> >>LongDistancePrefix: 0
> >>InternationalPrefix: 00
> >>DialStringRules: etc/dialrules
> >>ServerTracing: 1
> >>SessionTracing: 0x4f
> >>NoCarrierRetrys: 3 # retry 3
> >>times on no carrier
> >>MaxDials: 24 # Redial
> 24
> >>times before
> >>discarding fax
> >>MaxTries: 6 # Attempt
> to
> >>send fax 6 times
> >>
> >>Is MaxDials defined in another config file?
> >>
> >>
> >
> >
> >
>
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
> To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe
> hylafax-users-request@xxxxxxxxxxx < /dev/null
> *To learn about commercial HylaFAX(tm) support,
> mail sales@xxxxxxxxx*
>
>
__________________________________
Do you Yahoo!?
Check out the new Yahoo! Front Page.
www.yahoo.com
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
