[hylafax-users] Modem Command Errors

To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] Modem Command Errors
From: Horst Simon <hsimon@xxxxxxxxxxxxxxx>
Reply-to: hsimon@xxxxxxxxxxxxxxx
Date: Sat, 21 Aug 2004 22:34:06 +1000
Hi,

I have two HylaFax 4.2 installations one on SuSE 9.1 and one on United Linux 
(SuSE 8.0), both use Hayes Optima modems, one is a Optima 288 and the other 
is an Optima 336. Both can send and receive from fax machines and I can send 
from the Optima 336 to the Optima 288, but sending from the optima 288 to the 
Optima 336 fails, both are configured as Class 1. I have attached following 
are the logs:

Sender Optima 288:
Aug 21 16:54:58.82: [23873]: SESSION BEGIN 000000014 61395531624
Aug 21 16:54:58.82: [23873]: HylaFAX (tm) Version 4.2.0
Aug 21 16:54:58.82: [23873]: SEND FAX: JOB 12 DEST 95531624 COMMID 000000014 
DEVICE '/dev/ttyS0'
Aug 21 16:54:58.82: [23873]: <-- [12:AT+FCLASS=1\r]
Aug 21 16:54:59.11: [23873]: --> [2:OK]
Aug 21 16:54:59.12: [23873]: DIAL 95531624
Aug 21 16:54:59.12: [23873]: <-- [13:ATDT95531624\r]
Aug 21 16:55:20.84: [23873]: --> [7:CONNECT]
Aug 21 16:55:21.46: [23873]: --> [5:ERROR]
Aug 21 16:55:21.46: [23873]: MODEM Command error
Aug 21 16:55:21.46: [23873]: FCS error
Aug 21 16:55:21.46: [23873]: DELAY 200 ms
Aug 21 16:55:21.66: [23873]: <-- [9:AT+FRH=3\r]
Aug 21 16:55:21.71: [23873]: --> [10:NO CARRIER]
Aug 21 16:55:21.71: [23873]: MODEM No carrier
Aug 21 16:55:21.71: [23873]: DELAY 200 ms
Aug 21 16:55:21.91: [23873]: <-- [9:AT+FRH=3\r]
Aug 21 16:55:21.96: [23873]: --> [7:CONNECT]
Aug 21 16:55:22.38: [23873]: --> [10:NO CARRIER]
Aug 21 16:55:22.38: [23873]: MODEM No carrier
Aug 21 16:55:22.38: [23873]: DELAY 200 ms
Aug 21 16:55:22.58: [23873]: <-- [9:AT+FRH=3\r]
Aug 21 16:55:29.58: [23873]: --> [0:]
Aug 21 16:55:29.58: [23873]: MODEM <Empty line>
Aug 21 16:55:29.58: [23873]: <-- data [1]
Aug 21 16:55:29.63: [23873]: --> [2:OK]
Aug 21 16:55:29.63: [23873]: DELAY 200 ms
Aug 21 16:55:29.83: [23873]: <-- [9:AT+FRH=3\r]
Aug 21 16:55:36.83: [23873]: --> [0:]
Aug 21 16:55:36.83: [23873]: MODEM <Empty line>
Aug 21 16:55:36.83: [23873]: <-- data [1]
Aug 21 16:55:36.89: [23873]: --> [2:OK]
Aug 21 16:55:36.89: [23873]: DELAY 200 ms
Aug 21 16:55:37.09: [23873]: <-- [9:AT+FRH=3\r]
Aug 21 16:55:44.09: [23873]: --> [0:]
Aug 21 16:55:44.09: [23873]: MODEM <Empty line>
Aug 21 16:55:44.09: [23873]: <-- data [1]
Aug 21 16:55:44.14: [23873]: --> [2:OK]
Aug 21 16:55:44.14: [23873]: DELAY 200 ms
Aug 21 16:55:44.34: [23873]: <-- [9:AT+FRH=3\r]
Aug 21 16:55:51.34: [23873]: --> [0:]
Aug 21 16:55:51.34: [23873]: MODEM <Empty line>
Aug 21 16:55:51.34: [23873]: <-- data [1]
Aug 21 16:55:51.40: [23873]: --> [2:OK]
Aug 21 16:55:51.40: [23873]: DELAY 200 ms
Aug 21 16:55:51.60: [23873]: <-- [9:AT+FRH=3\r]
Aug 21 16:55:58.60: [23873]: --> [0:]
Aug 21 16:55:58.60: [23873]: MODEM <Empty line>
Aug 21 16:55:58.60: [23873]: <-- data [1]
Aug 21 16:55:58.65: [23873]: --> [2:OK]
Aug 21 16:55:58.65: [23873]: DELAY 200 ms
Aug 21 16:55:58.85: [23873]: <-- [9:AT+FRH=3\r]
Aug 21 16:56:05.85: [23873]: --> [0:]
Aug 21 16:56:05.85: [23873]: MODEM <Empty line>
Aug 21 16:56:05.85: [23873]: <-- data [1]
Aug 21 16:56:05.91: [23873]: --> [2:OK]
Aug 21 16:56:05.91: [23873]: DELAY 200 ms
Aug 21 16:56:06.11: [23873]: No answer (T.30 T1 timeout)
Aug 21 16:56:06.11: [23873]: SEND FAILED: JOB 12 DEST 95531624 ERR No answer 
(T.30 T1 timeout)
Aug 21 16:56:06.11: [23873]: <-- [9:AT+FTH=3\r]
Aug 21 16:56:06.34: [23873]: --> [7:CONNECT]
Aug 21 16:56:06.34: [23873]: <-- data [3]
Aug 21 16:56:06.34: [23873]: <-- data [2]
Aug 21 16:56:07.68: [23873]: --> [2:OK]
Aug 21 16:56:07.68: [23873]: <-- [5:ATH0\r]
Aug 21 16:56:07.85: [23873]: --> [2:OK]
Aug 21 16:56:07.85: [23873]: SESSION END

Receiver Optima 336:
Aug 21 16:55:50.57: [11410]: SESSION BEGIN 000000017 61395531624
Aug 21 16:55:50.57: [11410]: HylaFAX (tm) Version 4.2.0
Aug 21 16:55:50.57: [11410]: <-- [4:ATA\r]
Aug 21 16:55:58.36: [11410]: --> [7:CONNECT]
Aug 21 16:55:58.37: [11410]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS1'
Aug 21 16:55:58.37: [11410]: RECV FAX: begin
Aug 21 16:55:58.37: [11410]: <-- data [32]
Aug 21 16:55:58.37: [11410]: <-- data [2]
Aug 21 16:55:59.26: [11410]: --> [7:CONNECT]
Aug 21 16:55:59.26: [11410]: <-- data [23]
Aug 21 16:55:59.27: [11410]: <-- data [2]
Aug 21 16:55:59.29: [11410]: --> [7:CONNECT]
Aug 21 16:55:59.29: [11410]: <-- data [10]
Aug 21 16:55:59.29: [11410]: <-- data [2]
Aug 21 16:56:01.32: [11410]: --> [2:OK]
Aug 21 16:56:01.32: [11410]: <-- [9:AT+FRH=3\r]
Aug 21 16:56:04.42: [11410]: --> [0:]
Aug 21 16:56:04.42: [11410]: MODEM <Empty line>
Aug 21 16:56:04.42: [11410]: <-- data [1]
Aug 21 16:56:04.44: [11410]: --> [2:OK]
Aug 21 16:56:04.44: [11410]: DELAY 1500 ms
Aug 21 16:56:05.94: [11410]: <-- [9:AT+FTH=3\r]
Aug 21 16:56:06.03: [11410]: --> [7:CONNECT]
Aug 21 16:56:06.03: [11410]: <-- data [32]
Aug 21 16:56:06.03: [11410]: <-- data [2]
Aug 21 16:56:07.03: [11410]: --> [7:CONNECT]
Aug 21 16:56:07.03: [11410]: <-- data [23]
Aug 21 16:56:07.03: [11410]: <-- data [2]
Aug 21 16:56:07.06: [11410]: --> [7:CONNECT]
Aug 21 16:56:07.06: [11410]: <-- data [10]
Aug 21 16:56:07.06: [11410]: <-- data [2]
Aug 21 16:56:09.10: [11410]: --> [2:OK]
Aug 21 16:56:09.10: [11410]: <-- [9:AT+FRH=3\r]
Aug 21 16:56:12.20: [11410]: --> [0:]
Aug 21 16:56:12.20: [11410]: MODEM <Empty line>
Aug 21 16:56:12.20: [11410]: <-- data [1]
Aug 21 16:56:12.21: [11410]: --> [2:OK]
Aug 21 16:56:12.21: [11410]: DELAY 1500 ms
Aug 21 16:56:13.71: [11410]: <-- [9:AT+FTH=3\r]
Aug 21 16:56:13.80: [11410]: --> [7:CONNECT]
Aug 21 16:56:13.80: [11410]: <-- data [32]
Aug 21 16:56:13.80: [11410]: <-- data [2]
Aug 21 16:56:14.80: [11410]: --> [7:CONNECT]
Aug 21 16:56:14.80: [11410]: <-- data [23]
Aug 21 16:56:14.80: [11410]: <-- data [2]
Aug 21 16:56:14.83: [11410]: --> [7:CONNECT]
Aug 21 16:56:14.83: [11410]: <-- data [10]
Aug 21 16:56:14.83: [11410]: <-- data [2]
Aug 21 16:56:16.87: [11410]: --> [2:OK]
Aug 21 16:56:16.87: [11410]: <-- [9:AT+FRH=3\r]
Aug 21 16:56:19.97: [11410]: --> [0:]
Aug 21 16:56:19.97: [11410]: MODEM <Empty line>
Aug 21 16:56:19.97: [11410]: <-- data [1]
Aug 21 16:56:19.98: [11410]: --> [2:OK]
Aug 21 16:56:19.98: [11410]: DELAY 1500 ms
Aug 21 16:56:21.48: [11410]: <-- [9:AT+FTH=3\r]
Aug 21 16:56:21.57: [11410]: --> [7:CONNECT]
Aug 21 16:56:21.57: [11410]: <-- data [32]
Aug 21 16:56:21.57: [11410]: <-- data [2]
Aug 21 16:56:22.56: [11410]: --> [7:CONNECT]
Aug 21 16:56:22.56: [11410]: <-- data [23]
Aug 21 16:56:22.56: [11410]: <-- data [2]
Aug 21 16:56:22.59: [11410]: --> [7:CONNECT]
Aug 21 16:56:22.59: [11410]: <-- data [10]
Aug 21 16:56:22.59: [11410]: <-- data [2]
Aug 21 16:56:24.63: [11410]: --> [2:OK]
Aug 21 16:56:24.63: [11410]: <-- [9:AT+FRH=3\r]
Aug 21 16:56:27.73: [11410]: --> [0:]
Aug 21 16:56:27.73: [11410]: MODEM <Empty line>
Aug 21 16:56:27.73: [11410]: <-- data [1]
Aug 21 16:56:27.75: [11410]: --> [2:OK]
Aug 21 16:56:27.75: [11410]: DELAY 1500 ms
Aug 21 16:56:29.25: [11410]: <-- [9:AT+FTH=3\r]
Aug 21 16:56:29.34: [11410]: --> [7:CONNECT]
Aug 21 16:56:29.34: [11410]: <-- data [32]
Aug 21 16:56:29.34: [11410]: <-- data [2]
Aug 21 16:56:30.34: [11410]: --> [7:CONNECT]
Aug 21 16:56:30.34: [11410]: <-- data [23]
Aug 21 16:56:30.34: [11410]: <-- data [2]
Aug 21 16:56:30.37: [11410]: --> [7:CONNECT]
Aug 21 16:56:30.37: [11410]: <-- data [10]
Aug 21 16:56:30.37: [11410]: <-- data [2]
Aug 21 16:56:32.40: [11410]: --> [2:OK]
Aug 21 16:56:32.40: [11410]: <-- [9:AT+FRH=3\r]
Aug 21 16:56:32.87: [11410]: --> [7:CONNECT]
Aug 21 16:56:32.88: [11410]: --> [5:ERROR]
Aug 21 16:56:32.88: [11410]: MODEM Command error
Aug 21 16:56:32.88: [11410]: FCS error
Aug 21 16:56:32.88: [11410]: DELAY 1500 ms
Aug 21 16:56:34.38: [11410]: <-- [9:AT+FTH=3\r]
Aug 21 16:56:34.48: [11410]: --> [7:CONNECT]
Aug 21 16:56:34.48: [11410]: <-- data [32]
Aug 21 16:56:34.48: [11410]: <-- data [2]
Aug 21 16:56:35.47: [11410]: --> [7:CONNECT]
Aug 21 16:56:35.47: [11410]: <-- data [23]
Aug 21 16:56:35.47: [11410]: <-- data [2]
Aug 21 16:56:35.50: [11410]: --> [7:CONNECT]
Aug 21 16:56:35.50: [11410]: <-- data [10]
Aug 21 16:56:35.50: [11410]: <-- data [2]
Aug 21 16:56:37.55: [11410]: --> [2:OK]
Aug 21 16:56:37.55: [11410]: <-- [9:AT+FRH=3\r]
Aug 21 16:56:39.48: [11410]: --> [7:CONNECT]
Aug 21 16:56:39.48: [11410]: --> [5:ERROR]
Aug 21 16:56:39.48: [11410]: MODEM Command error
Aug 21 16:56:39.48: [11410]: FCS error
Aug 21 16:56:39.48: [11410]: RECV FAX: No answer (T.30 T1 timeout)
Aug 21 16:56:39.49: [11410]: RECV FAX: end
Aug 21 16:56:39.49: [11410]: SESSION END

-- 
E-Mail: hsimon@xxxxxxxxxxxxxxx
 Tel: +61(0)3 9553-1624
 Fax: +61(0)3 9553-162
 This message was sent by
 KMail 1.7 Using KDE3.3 & SuSE Linux 9.1


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
Follow-Ups:
- Re: [hylafax-users] Modem Command Errors
  - From: Lee Howard
Prev by Date: Re: [hylafax-users] Batching Support: Bug 118
Next by Date: Re: [hylafax-users] Modem Command Errors
Previous by thread: Re: [hylafax-users] Batching Support: Bug 118
Next by thread: Re: [hylafax-users] Modem Command Errors
Index(es):
- Main
- Thread
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services