|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] problem receiving faxes with Hylafax v4.2.0 alpha 023
Ok, thanks for your fast response.
I've used exactly the same modem, and the same phone line for the two tests.
I did the following:
I've updated and existing installation of Hylafax 4.2.0beta2 to 4.2.0 without changing any
configuration parameter file and without changing the modem.
With 4.2.0beta2 this worked fine, and with 4.2.0 it doesn't work.
Lee Howard wrote:
On 2004.08.18 09:12 Daniel Moreda García wrote:
This is a session of the same fax, but with Hylafax v4.2.0beta2:
Aug 18 17:37:56.89: [ 3015]: SESSION BEGIN 000005165 34981xxxxxx
Aug 18 17:37:56.89: [ 3015]: HylaFAX (tm) Version 4.2.0beta2
Aug 18 17:37:56.89: [ 3015]: MODEM set XON/XOFF/FLUSH: input ignored,
output disabled
Aug 18 17:37:56.89: [ 3015]: <-- [4:ATA\r]
Aug 18 17:38:03.39: [ 3015]: --> [7:CONNECT]
Aug 18 17:38:03.39: [ 3015]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS1'
Aug 18 17:38:03.39: [ 3015]: MODEM input buffering enabled
Aug 18 17:38:03.39: [ 3015]: RECV FAX: begin
Aug 18 17:38:03.39: [ 3015]: MODEM input buffering disabled
Aug 18 17:38:03.39: [ 3015]: <-- data [37]
Aug 18 17:38:03.39: [ 3015]: <-- data [2]
Aug 18 17:38:03.43: [ 3015]: --> [7:CONNECT]
Aug 18 17:38:03.43: [ 3015]: <-- data [23]
Aug 18 17:38:03.43: [ 3015]: <-- data [2]
Aug 18 17:38:03.46: [ 3015]: --> [7:CONNECT]
Aug 18 17:38:03.46: [ 3015]: <-- data [10]
Aug 18 17:38:03.46: [ 3015]: <-- data [2]
Aug 18 17:38:06.68: [ 3015]: --> [2:OK]
Here's the same segment from the 4.2.0 session that you sent:
Aug 18 11:37:39.01: [ 6052]: SESSION BEGIN 000000003 34981xxxxxx
Aug 18 11:37:39.01: [ 6052]: HylaFAX (tm) Version 4.2.0
Aug 18 11:37:39.01: [ 6052]: MODEM set XON/XOFF/FLUSH: input ignored,
output disabled
Aug 18 11:37:39.01: [ 6052]: <-- [4:ATA\r]
Aug 18 11:37:45.58: [ 6052]: --> [7:CONNECT]
Aug 18 11:37:45.58: [ 6052]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'
Aug 18 11:37:45.58: [ 6052]: STATE CHANGE: ANSWERING -> RECEIVING
Aug 18 11:37:45.58: [ 6052]: MODEM input buffering enabled
Aug 18 11:37:45.58: [ 6052]: RECV FAX: begin
Aug 18 11:37:45.58: [ 6052]: MODEM input buffering disabled
Aug 18 11:37:45.58: [ 6052]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86
62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 0C>
Aug 18 11:37:45.58: [ 6052]: <-- data [32]
Aug 18 11:37:45.58: [ 6052]: <-- data [2]
Aug 18 11:37:45.61: [ 6052]: --> [7:CONNECT]
Aug 18 11:37:45.61: [ 6052]: <-- HDLC<23:FF C0 02 86 96 26 A6 B6 96 2E
36 AE B2 04 86 CE 76 96 A2 04 1E 86 62>
Aug 18 11:37:45.61: [ 6052]: <-- data [23]
Aug 18 11:37:45.61: [ 6052]: <-- data [2]
Aug 18 11:37:45.64: [ 6052]: --> [7:CONNECT]
Aug 18 11:37:45.64: [ 6052]: <-- HDLC<10:FF C8 01 00 76 5F 23 01 FB C0>
Aug 18 11:37:45.64: [ 6052]: <-- data [10]
Aug 18 11:37:45.64: [ 6052]: <-- data [2]
Aug 18 11:37:48.19: [ 6052]: --> [0:]
Aug 18 11:37:48.19: [ 6052]: MODEM <Empty line>
Aug 18 11:37:48.19: [ 6052]: MODEM TIMEOUT: sending DIS/DCS frame
Notice that HylaFAX is waiting for the modem to respond OK and gives up
at 11:37:48.19.
It looks like a different modem (perhaps just modem firmware) to me.
The modem is behaving differently in your 4.2.0beta2 installation than
it does in your 4.2.0 installation. If the modem were to behave the
same in latter as in the first then it would be fine.
Lee.
--
Daniel Moreda García
Dpto. Sistemas
Einsa Multimedia, S.A.
Ctra. Campolongo a Monfero km 0,4 (Campolongo)
15614 Pontedeume (A Coruña)
España
http://www.einsamultimedia.com
Tlf: +34 981 454 015
Fax: +34 981 495 680
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
