Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] MT-5634ZPX-PCI-U 1.32i firmware



Here's an update to the "Can not initialize modem" problem I was seeing
in my /var/log/messages file.  Running the test I would see the can "not
initialize message" about every 8 minutes.  I added these lines to my
modem config file:

Class1RMQueryCmd:       "!3,24,48,72,73,74,96,97,98,121,122,145,146"
Class1TMQueryCmd:       "!3,24,48,72,73,74,96,97,98,121,122,145,146"
ModemModelQueryCmd:     "!LT V.92 1.0 MT5634ZPX-PCI-U Internal
Data/Fax/Voice Modem Version 1.32i"
ModemMfrQueryCmd:       "!LT V.92 1.0 MT5634ZPX-PCI-U Internal
Data/Fax/Voice Modem Version 1.32i"
ModemClassQueryCmd:     "!0,1,1.0,2,2.0,2.1,8"

After adding these lines I haven't seen the "can not initialize" message
in over 10 hours of running the test.  I'm not sure if this solved the
problem or just reduced the chance of it happening below the threshold
of what my test would detect.

Would it be reasonable to reduce ModemResetDelay from 2600ms to 1000ms
and ModemSoftResetCmdDelay from 3000ms to 1000ms to further reduce the
chance of a call coming in while HylaFAX is initializing the modem?

Kris



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services