Re: [hylafax-users] problem with configure

[Bill Binko <bill@xxxxxxxxx>]

You should use Mandrake's 4.1.8 if you're going to stick with that
version.  If you intend to build a CVS version, you might as well install
from source.

run rpm -qa libtiff*

I get

libtiff3-devel-3.5.7-11mdk
libtiff3-3.5.7-11mdk
libtiff-progs-3.5.7-11mdk

and I can build fine.  If you install from RPM (using urpmi) it will
install what you need automatically.

Keep an eye on my next thread: I'm porting 4.2.0rc2 to Mandrake and it
will be in cooker shortly.

Bill

On Sun, 1 Aug 2004 usergroup@xxxxxxxxxxxxx wrote:

>
>
>
> Hi,
>
> I try to install hylafax on a Mandrake 10
>
> I downloaded ftp://ftp.hylafax.org/source/hylafax-4.1.8.tar.gz
> configure gives me the following error
>
> Should I install the rpm from mandrake instead of using the tar ball?
>
> thanks in advance
>
> Philippe Rousselot
>
>
> [philippe@serveur hylafax-4.1.8]$ ./configure
>
> Configuring HylaFAX (tm) (aka FlexFAX) 4.1.8.
>
> If configure does the wrong thing, check the file config.log for
> information that may help you understand what went wrong.
>
> Reading site-wide parameters from ./config.site.
> Wow, you've got a i686-pc-linux-gnu system!
> Using /usr/bin/gcc for a C compiler (set CC to override).
> Looks like /usr/bin/gcc supports the -g option.
> Using " -g" for C compiler options.
> Looks like /usr/bin/gcc has an ANSI C preprocessor.
> ... but __ANSI_CPP__ is not automatically defined, will compensate.
> Looks like /usr/bin/gcc supports the -M option for generating make dependencies.
> Using /usr/bin/g++ for a C++ compiler (set CXX to override).
> Looks like /usr/bin/g++ supports the -g option.
> Using " -g" for C++ compiler options.
> Looks like /usr/bin/g++ has an ANSI C preprocessor.
> ... but __ANSI_CPP__ is not automatically defined, will compensate.
> Using /usr/bin/make to configure the software.
> Using "include file" syntax for Makefiles.
> Looks like make supports "sinclude" for conditional includes.
> Using /bin/bash to process command scripts.
> Looks like -lcrypt is needed for crypt.
> Looks like -lutil is needed for wtmp file logging.
>
> Creating port.h with necessary definitions.
> ... open FIFO files read+write to avoid select bug
> ... using call-by-reference for TIOCMBIS ioctl
> ... constrain client IDs to be <= 60002
> ... configure use of <sys/select.h>
> ... use (sig_t) for sigaction handler type
> ... use (sig_t) for signal handler type
> ... configure use of mmap for memory-mapped files
> ... configure use of sysconf
> ... configure use of ulimit
> ... configure use of getdtablesize
> ... add #define for howmany
> ... configure use of fchown
> ... configure use of fchmod
> ... configure use of <locale.h> (internationalization support)
> ... configure use of <paths.h>
> ... configure use of logwtmp (BSD-style wtmp logging)
> ... configure use of logout (BSD-style utmp support)
> ... configure use of <utmp.h> (normal utmp interface)
> ... configure use of extended exit status in utmp
> ... configure use of POSIX realtime process control interface
> ... configure use of <crypt.h>
> ... checking TIFF library version
>
> Missing TIFF Library.
>
> Compilation of the following test program failed:
>
> ----------------------------------------------------------
> #include <stdio.h>
> #include "tiffio.h"
> main()
> {
>     printf( "header_ver=%d lib_ver=%s", TIFFLIB_VERSION, TIFFGetVersion() );
>     exit(0);
> }
> ----------------------------------------------------------
>
> TIFFINC=/usr/local/include
> LIBTIFF=-L/usr/local/lib -ltiff
>
> Verify that you have the TIFFINC and LIBTIFF configuration parameters
> set correctly for your system (see above) and that any environment
> variables are setup that are needed to locate a libtiff DSO at runtime
> (e.g. LD_LIBRARY_PATH). Also be sure that any relative pathnames are
> made relative to the top of the build area.
>
> Unrecoverable error!  Once you've corrected the problem rerun this script.
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
>


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*