|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Sending fax issue "modem write short" error?
Hello, Below you will find a log for a fax which I tried to send this
morning. In the log I noticed something called a modem write error, any
ideas?
Hyla 4.2.0 rc1
Redhat es 3.0
Multitech MT5634ZBA-USB (4)
Belkin 8port USB hub
Thanks! Ray
Jul 07 11:02:10.63: [23081]: SESSION BEGIN 000006408 17047891234
Jul 07 11:02:10.63: [23081]: HylaFAX (tm) Version 4.2.0rc1
Jul 07 11:02:10.63: [23081]: SEND FAX: JOB 4182 DEST 17047891234 COMMID
000006408 DEVICE '/dev/usb/ttyACM0'
Jul 07 11:02:10.63: [23081]: MODEM input buffering enabled
Jul 07 11:02:10.63: [23081]: <-- [12:AT+FCLASS=1\r]
Jul 07 11:02:10.73: [23081]: --> [2:OK]
Jul 07 11:02:10.73: [23081]: MODEM set XON/XOFF/FLUSH: input ignored,
output disabled
Jul 07 11:02:10.73: [23081]: DIAL 17047891234
Jul 07 11:02:10.73: [23081]: <-- [16:ATDT17047891234\r]
Jul 07 11:02:24.03: [23081]: --> [7:CONNECT]
Jul 07 11:02:24.03: [23081]: MODEM input buffering disabled
Jul 07 11:02:26.01: [23081]: --> HDLC<39:FF C0 04 00 00 8C 00 77 1D 01 01
80 21 B0 BB 00 00 BB BB 00 00 BB BB BB BB BB 00 00 00 00 00 B7 84 0D 00 00
0C A2 21>
Jul 07 11:02:26.01: [23081]: --> [2:OK]
Jul 07 11:02:26.01: [23081]: REMOTE NSF "00 00 31 00 EE B8 80 80 01 84 0D
DD 00 00 DD DD 00 00 DD DD DD DD DD 00 00 00 00 00 ED 21 B0 00 00 30"
Jul 07 11:02:26.01: [23081]: NSF remote fax equipment: Sharp/Olivetti
Jul 07 11:02:26.01: [23081]: NSF remote station ID: "ÝÝÝÝÝ"
Jul 07 11:02:26.01: [23081]: <-- [9:AT+FRH=3\r]
Jul 07 11:02:26.01: [23081]: --> [7:CONNECT]
Jul 07 11:02:26.71: [23081]: --> HDLC<25:FF C0 02 CC 4C 1C 2C 2C AC 1C 2C
0C EC 8C 04 04 04 04 04 04 04 04 04 E5 34>
Jul 07 11:02:26.71: [23081]: --> [2:OK]
Jul 07 11:02:26.71: [23081]: REMOTE CSI "17047891234"
Jul 07 11:02:26.71: [23081]: <-- [9:AT+FRH=3\r]
Jul 07 11:02:26.71: [23081]: --> [7:CONNECT]
Jul 07 11:02:27.03: [23081]: --> HDLC<11:FF C8 01 00 77 1D 01 01 80 0B A0>
Jul 07 11:02:27.03: [23081]: --> [2:OK]
Jul 07 11:02:27.03: [23081]: REMOTE best rate 14400 bit/s
Jul 07 11:02:27.03: [23081]: REMOTE max A4 page width (215 mm)
Jul 07 11:02:27.03: [23081]: REMOTE max unlimited page length
Jul 07 11:02:27.03: [23081]: REMOTE best vres 7.7 line/mm
Jul 07 11:02:27.03: [23081]: REMOTE best format 2-D MR
Jul 07 11:02:27.03: [23081]: REMOTE best 20 ms, 10 ms/scanline
Jul 07 11:02:27.03: [23081]: USE 14400 bit/s
Jul 07 11:02:27.03: [23081]: USE 20 ms, 10 ms/scanline
Jul 07 11:02:27.03: [23081]: SEND file "docq/doc7628.ps;30"
Jul 07 11:02:27.03: [23081]: USE A4 page width (215 mm)
Jul 07 11:02:27.03: [23081]: USE unlimited page length
Jul 07 11:02:27.03: [23081]: USE 3.85 line/mm
Jul 07 11:02:27.03: [23081]: USE 2-D MR
Jul 07 11:02:27.03: [23081]: SEND training at v.17 14400 bit/s
Jul 07 11:02:27.03: [23081]: <-- [9:AT+FTH=3\r]
Jul 07 11:02:27.89: [23081]: --> [7:CONNECT]
Jul 07 11:02:27.89: [23081]: <-- HDLC<23:FF C0 C2 CE C6 96 2E CE F6 76 E6
86 96 22 04 76 F6 96 76 96 B6 F6 22>
Jul 07 11:02:27.89: [23081]: <-- data [23]
Jul 07 11:02:27.89: [23081]: <-- data [2]
Jul 07 11:02:27.89: [23081]: --> [7:CONNECT]
Jul 07 11:02:27.89: [23081]: <-- HDLC<6:FF C8 C1 00 45 10>
Jul 07 11:02:27.89: [23081]: <-- data [6]
Jul 07 11:02:27.89: [23081]: <-- data [2]
Jul 07 11:02:29.05: [23081]: --> [2:OK]
Jul 07 11:02:29.05: [23081]: <-- [9:AT+FTS=7\r]
Jul 07 11:02:29.10: [23081]: --> [2:OK]
Jul 07 11:02:29.10: [23081]: MODEM set XON/XOFF/FLUSH: input interpreted,
output disabled
Jul 07 11:02:29.10: [23081]: <-- [11:AT+FTM=145\r]
Jul 07 11:02:29.11: [23081]: --> [7:CONNECT]
Jul 07 11:02:29.11: [23081]: <-- data [1024]
Jul 07 11:02:29.13: [23081]: <-- data [1024]
Jul 07 11:02:29.14: [23081]: <-- data [652]
Jul 07 11:02:30.96: [23081]: <-- data [2]
Jul 07 11:02:32.28: [23081]: --> [2:OK]
Jul 07 11:02:32.28: [23081]: MODEM set XON/XOFF/DRAIN: input ignored,
output disabled
Jul 07 11:02:32.28: [23081]: <-- [9:AT+FRH=3\r]
Jul 07 11:02:32.42: [23081]: --> [7:CONNECT]
Jul 07 11:02:33.59: [23081]: --> HDLC<5:FF C8 21 57 BE>
Jul 07 11:02:33.59: [23081]: --> [2:OK]
Jul 07 11:02:33.59: [23081]: TRAINING succeeded
Jul 07 11:02:33.59: [23081]: DELAY 200 ms
Jul 07 11:02:33.78: [23081]: <-- [11:AT+FTM=146\r]
Jul 07 11:02:33.78: [23081]: --> [7:CONNECT]
Jul 07 11:02:33.78: [23081]: MODEM set XON/XOFF/FLUSH: input interpreted,
output disabled
Jul 07 11:02:33.78: [23081]: SEND begin page
Jul 07 11:02:33.78: [23081]: Reading MH-compressed image file
Jul 07 11:02:33.79: [23081]: <-- data [1026]
Jul 07 11:02:33.81: [23081]: <-- data [1024]
Jul 07 11:02:33.83: [23081]: <-- data [1024]
Jul 07 11:02:34.53: [23081]: <-- data [1024]
Jul 07 11:02:35.10: [23081]: <-- data [1026]
Jul 07 11:02:35.67: [23081]: <-- data [1034]
Jul 07 11:02:36.25: [23081]: <-- data [1024]
Jul 07 11:02:36.81: [23081]: <-- data [1028]
Jul 07 11:02:37.38: [23081]: <-- data [1030]
Jul 07 11:02:37.95: [23081]: <-- data [1027]
Jul 07 11:02:38.52: [23081]: <-- data [1028]
Jul 07 11:02:39.09: [23081]: <-- data [1024]
Jul 07 11:02:39.66: [23081]: <-- data [1027]
Jul 07 11:02:40.22: [23081]: <-- data [1026]
Jul 07 11:02:40.80: [23081]: <-- data [1025]
Jul 07 11:02:41.37: [23081]: <-- data [1024]
Jul 07 11:03:41.36: [23081]: MODEM TIMEOUT: writing to modem
Jul 07 11:03:41.36: [23081]: MODEM WRITE SHORT: sent 1024, wrote 832
Jul 07 11:03:41.36: [23081]: SENT 38787 bytes of data
Jul 07 11:03:41.36: [23081]: SEND end page
Jul 07 11:03:41.36: [23081]: MODEM set XON/XOFF/DRAIN: input ignored,
output disabled
Jul 07 11:03:41.36: [23081]: Unspecified Transmit Phase C error
Jul 07 11:03:41.36: [23081]: SEND: Unspecified Transmit Phase C error;
Giving up after 3 attempts to send same page "docq/doc7628.ps;30", dirnum 0
Jul 07 11:03:41.36: [23081]: <-- [9:AT+FTH=3\r]
Jul 07 11:03:41.36: [23081]: --> [5:ERROR]
Jul 07 11:03:41.36: [23081]: MODEM input buffering enabled
Jul 07 11:03:41.36: [23081]: <-- [5:ATH0\r]
Jul 07 11:03:41.51: [23081]: --> [2:OK]
Jul 07 11:03:41.51: [23081]: MODEM set DTR OFF
Jul 07 11:03:41.51: [23081]: SESSION END
CONFIDENTIALITY NOTICE: This e-mail, including attachments, is for the sole use of the individual to whom it is addressed. This message is confidential and may contain information that is privileged, confidential and is exempt from disclosure under applicable law. Any unauthorized review, use, disclosure or distribution is prohibited. If you have received this e-mail in error, please notify the sender by reply e-mail and destroy this message and its attachments.
