Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Waiting for modem to come ready ... wrong config ?



Greetings, and thanks for your help so far. Your feedback helped somewhat.
I was able to send a fax, but it seams the modem hangs after processing a
random number of fax requests in the queue.

Is there a specific config for a Sportster 288000/Fax V6.0 ?

When using faxaddmodem, we have the choice to configure the modem as a
Class1 or Class2.0.
We tried both choices.

< BEGIN >

Probing for best speed to talk to modem: 38400 OK.

This modem looks to have support for Class 1 and 2.0.
How should it be configured [1]? 2.0

Hmm, this looks like a Class 2.0 modem.
Modem manufacturer is "USRobotics Sportster 28800 V.34 Fax".
Modem model is "Product type           US/Canada External".
DTE-DCE flow control scheme [default]?

Using prototype configuration file usr-2.0...

The modem configuration parameters are:

ModemFlowControl:       rtscts
ModemHardFlowCmd:       AT&H1&I0&R2
ModemNoFlowCmd:         AT&H0&I0&R1
ModemRate:              19200
ModemResultCodesCmd:    ATQ0X4
ModemSetVolumeCmd:      "ATM0 ATM1 ATM1 ATM1 ATM1"
ModemSetupAACmd:        AT+FAA=1
ModemSetupDCDCmd:       AT&C1
ModemSetupDTRCmd:       ATS13=1&D2
ModemSoftFlowCmd:       AT&H2&I2&R1
Class2BUGCmd:           AT+FBU=0
Class2CQQueryCmd:       !(0),(0)
Class2NRCmd:            AT+FNR=1,1,1,0
Class2SendRTC:          yes

< END >


Here is the output of probemodem


< BEGIN >


Serial port that modem is connected to []? ttyS0

Now we are going to probe the tty port.  This takes a few seconds,
so be patient.  Note that if you do not have the modem cabled to
the port, or the modem is turned off, this may hang (just go and
cable up the modem or turn it on, or whatever).

Probing for best speed to talk to modem: 38400 OK.

This looks like a Class 1 and 2.0 modem.

ATI0    RESULT = "OK"   RESPONSE = "2886"
ATI1    RESULT = "OK"   RESPONSE = "1554"
ATI2    RESULT = "OK"   RESPONSE = "OK"
ATI3    RESULT = "OK"   RESPONSE = "Sportster 28800/Fax V6.0"
ATI4    RESULT = "OK"   RESPONSE = "USRobotics Sportster 28800 V.34 Fax
Settings..."
ATI5    RESULT = "   S56=016  S57=000"  RESPONSE = "USRobotics Sportster
28800 V.34 Fax NVRAM Settings..."
ATI6    RESULT = "OK"   RESPONSE = "USRobotics Sportster 28800 V.34 Fax Link
Diagnostics..."
ATI7    RESULT = "OK"   RESPONSE = "Configuration Profile..."
ATI8    RESULT = "ERROR"        RESPONSE = "ERROR"
ATI9    RESULT = "ERROR"        RESPONSE = "ERROR"

Class 1 stuff...

AT+FCLASS=?     RESULT = "OK"   RESPONSE = "0,1,2.0"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "0"
AT+FCLASS=0     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS=1     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "0"
AT+FJUNK=?      RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FJUNK?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAA=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAA?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAE=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAE?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FTH=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FRH=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FTM=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FRM=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FTS=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FRS=?        RESULT = "ERROR"        RESPONSE = "ERROR"

Class 2.0 stuff...

AT+FCLASS=?     RESULT = "OK"   RESPONSE = "0,1,2.0"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "0"
AT+FCLASS=0     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS=1     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS=2.0   RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "0"
AT+FJU=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FJU?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FDR=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FDT=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FIP=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAA=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAA?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAP=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAP?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FBS?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FBO=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FBO?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FBU=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FBU?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FCC=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FCC?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FCQ=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FCQ?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FCR=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FCR?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FCS=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FCS?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FCT=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FCT?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FEA=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FEA?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FFC=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FFC?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FFD=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FFD?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FHS?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FIE=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FIE?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FIS=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FIS?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FIT=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FIT?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FLI=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FLI?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FLO=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FLO?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FLP=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FLP?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FMI?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FMM?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FMR?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FMS=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FMS?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FNR=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FNR?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FNS=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FNS?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FPA=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FPA?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FPI=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FPI?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FPP=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FPP?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FPR=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FPR?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FPS=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FPS?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FPW=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FPW?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FRQ=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FRQ?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FRY=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FRY?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FSA=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FSA?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FSP=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FSP?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+IFC=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+IFC?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+IPR=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+IPR?  RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FKS=?        RESULT = "ERROR"        RESPONSE = "ERROR"

< END >

-
Frederic Trudeau <ftrudeau@xxxxxxx>
Programmation / Departement reseau
Web: http://www.cam.org

----- Original Message ----- 
From: "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx>
To: "Frederic Trudeau" <ftrudeau@xxxxxxx>
Cc: <hylafax-users@xxxxxxxxxxx>
Sent: Monday, June 21, 2004 5:07 PM
Subject: Re: [hylafax-users] Waiting for modem to come ready ... wrong
config ?


> On 2004.06.21 13:59 Frederic Trudeau wrote:
>
> > ati3
> > Sportster 28800/Fax V6.0
> >
> > OK
> > ati6
> > USRobotics Sportster 28800 V.34 Fax Link Diagnostics...
>
> > Im using the default config, which i copied/pasted here ... default
> > one for now ([spooldir]/config/rockwell-rc), included in this mail
> > below.
>
> You need to use config/usr-xon.
>
> faxaddmodem ttyS0
>
> should pick that up for you automatically.  If not, then please post
> the probemodem output for the modem.
>
> Lee.
>
> ____________________ HylaFAX(tm) Users Mailing List
_______________________
>   To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
/dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
>
>


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services