Re: [hylafax-users] No response to MPS repeated 3 times

[Matt Yeager <Matt@xxxxxxxxxxxxxxxxxx>]

How can I increase the AT+FTS settings? Looking at some more of my logs, it
looks like FTH is almost always =3 when the problem occurs. What do these AT
Fax commands stand for? How can I change them?

		Thanks,
			-Matt


-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx]On Behalf Of Lee Howard
Sent: Tuesday, June 08, 2004 3:02 PM
To: Matt Yeager
Cc: 'hylafax-users@xxxxxxxxxxx'
Subject: Re: [hylafax-users] No response to MPS repeated 3 times


On 2004.06.08 12:04 Matt Yeager wrote:

> Jun 08 11:14:25.03: [20442]: SEND end page
> Jun 08 11:14:27.78: [20442]: --> [2:OK]
> Jun 08 11:14:27.78: [20442]: <-- [9:AT+FTS=7\r]
> Jun 08 11:14:27.86: [20442]: --> [2:OK]
> Jun 08 11:14:27.86: [20442]: SEND send MPS (more pages, same document)
> Jun 08 11:14:27.86: [20442]: <-- [9:AT+FTH=3\r]
> Jun 08 11:14:27.91: [20442]: --> [7:CONNECT]
> Jun 08 11:14:27.91: [20442]: <-- data [3]
> Jun 08 11:14:27.91: [20442]: <-- data [2]
> Jun 08 11:14:29.22: [20442]: --> [2:OK]
> Jun 08 11:14:29.22: [20442]: <-- [9:AT+FRH=3\r]
> Jun 08 11:14:32.32: [20442]: --> [0:]

If the remote actually gets this page then you probably either need to 
increase the AT+FTS=7 setting to AT+FTS=9 or higher - or you're just 
experiencing bad timing luck if the remote waits more than 3 seconds to 
respond after hearing MCF (luck because you'd have to luckily catch it 
on one of the next attempts).

If the remote didn't get the page then it is something with the page 
data itself or with the pre-page timings.  Search the mailing list 
archives for the exact information.  This matter has come up numerous 
times.

Another thing to consider is why the V.17 14400 training failed.  I 
don't have the answer there, but it could clue you in to some timing 
problems that translate into timing problems when sending page data.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*