[hylafax-users] HylaFax Sending Blank Pages

["Eric Butler" <ebutler@xxxxxxxxxxx>]

For some reason all pages received by our hylafax server are completely blank. It gets the length right (correct number of blank pages are printed), and produces no errors.

 

The postscript file that HylaFax generates contains content as well as the output of ps2fax if manually executed against a file in docq. Tiffcheck verifies that this is a valid file, so I am at a total loss at what could be wrong.

 

Incoming faxes work perfectly.

 

The modem config file (config.devid) is pasted below. We are using a Patton DialFire/DataFire 2977 with the digi drivers.

 

Thank you very much in advance for your time.

 

Regards,

 

Eric Butler

 

 

CountryCode:            1

AreaCode:               425

FAXNumber:              +1.425.902.4120

LongDistancePrefix:     1

InternationalPrefix:    011

DialStringRules:        etc/dialrules

 

ServerTracing:          0x08501

SessionTracing:         0x08501

 

RecvFileMode:           0644

LogFileMode:            0600

DeviceMode:             0600

RingsBeforeAnswer:      1

SpeakerVolume:          off

 

GettyArgs:              "%l"

#GettyArgs:              "-h %l dx_%s"

 

LocalIdentifier:        "LION, Inc."

TagLineFormat:          "From %%l|%c|Page %%P of %%T"

MaxRecvPages:           25

 

ModemType:              Class2.0

ModemRate:              19200

 

ModemFlowControl:       xonxoff

ModemNoFlowCmd:         AT&K0

ModemSoftFlowCmd:       AT&K6

ModemHardFlowCmd:       AT&K3

 

Class2APCmd:            AT+FAP=1,1,1

Class2CQCmd:            AT+FCQ=2,2

ModemAnswerCmd:         AT+FCC=,,,,1;A