|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] T.30 T2 timeout, expected page not received
On 2004.04.20 09:59 Andras Kende wrote:
Recently installed Hylafax 4.1.8 on FreeBSD 5.2.1 with 1 USR 56K
External
modem.
Everything good except there is many of the same:
'T.30 T2 timeout, expected page not received'
Apr 20 09:23:15.02: [ 539]: <-- [11:AT+FRM=146\r]
Apr 20 09:23:15.80: [ 539]: --> [7:CONNECT]
Apr 20 09:23:15.80: [ 539]: RECV: begin page
Apr 20 09:23:16.84: [ 539]: RECV: 3 total lines, 1 bad lines, 1
consecutive bad lines
Apr 20 09:23:16.84: [ 539]: RECV: REJECT page quality, 66% good
lines (95% required)
Apr 20 09:23:16.84: [ 539]: RECV: end page
Apr 20 09:23:16.84: [ 539]: --> [10:NO CARRIER]
Apr 20 09:23:16.84: [ 539]: <-- [9:AT+FRH=3\r]
Apr 20 09:23:19.67: [ 539]: --> [7:CONNECT]
Apr 20 09:23:20.39: [ 539]: --> [5:ERROR]
Apr 20 09:23:20.39: [ 539]: MODEM Command error
Apr 20 09:23:20.39: [ 539]: FCS error
Apr 20 09:23:20.39: [ 539]: <-- [9:AT+FRH=3\r]
Apr 20 09:23:20.41: [ 539]: --> [7:CONNECT]
Apr 20 09:23:21.22: [ 539]: --> [5:ERROR]
This is probably a USR-specific shortcoming, but it could be due to
line problems or other issues, so switching modems to something non-USR
will probably help, but it may not.
Maybe 10-15% of incoming faxes..
Searched google but didn't find a definitive answer.
Is a quick hack command available,
or the problem related to the USR modem ??
There's really nothing HylaFAX can do here to improve the result. The
modem reports (erroniously) the end-of-page signal (DLE+ETX, NO
CARRIER).
Should I just get a Multitech MT5634ZBA-V-V92-NAM ?
It is a good modem.
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
