Hi,
I have tested it with sendfax plz check
root@Hylafax /]# sendfax -n -d 1234567
/etc/passwd
after
executing the faxstat
[root@Hylafax /]# faxstat -svr
Trying localhost (127.0.0.1) at port
4559...
Connected to Hylafax.
220 Hylafax server (HylaFAX (tm) Version
4.1.5) ready.
-> USER root
230 User root logged in.
-> PORT 127,0,0,1,128,9
200 PORT command successful.
-> LIST status
150 Opening new data connection for
"status".
HylaFAX scheduler on Hylafax: Running
226 Transfer complete.
-> JOBFMT
200 %-4j %3i %1a %6.6o %-12.12e %5P %5D
%7z %.25s
-> PORT 127,0,0,1,128,10
200 PORT command successful.
-> LIST sendq
150 Opening new data connection for
"sendq".
JID Pri S Owner
Number Pages Dials
TTS Status
1 127 W root
1234567 0:0 0:12
226 Transfer complete.
-> RCVFMT
200 %-7m %4p%1z %-8.8o %14.14s %7t %f
-> PORT 127,0,0,1,128,11
200 PORT command successful.
-> LIST recvq
150 Opening new data connection for
"recvq".
226 Transfer complete.
From: Geoff Tait
[mailto:GTait@xxxxxxxxxxxxx]
Sent: Friday, April 16, 2004 10:23
AM
To: Sajid Fiaz
Cc: hylafax-users@xxxxxxxxxxx
Subject: RE: [hylafax-users] 0 of
0 pages received on Hylafax server.
is there anything in your syslog about
hylafax? /var/log/syslog
-----Original Message-----
From: Sajid Fiaz
[mailto:sajid@xxxxxxxxxxxxxxxxxx]
Sent: Friday, 16 April 2004 3:17
PM
To: Geoff Tait
Subject: RE: [hylafax-users] 0 of
0 pages received on Hylafax server.
Dera could u tell me wher ecan I find the
logs because there is no logs in /var/spool/hylafax/log/*
But when I receive a mail on console it
says
---- Unsent job status ----
Destination: 9856321
JobID: 2
GroupID: 57
Sender: Nobody
Mailaddr: root@hylafax
Submitted From: 192.168.0.1
Page Width: 209 (mm)
Page Length: 296 (mm)
Resolution: 196 (lpi)
Status:
[Job time limit exceeded]
Dialogs: 0 (exchanges with remote device)
Dials: 0 (consecutive failed
calls to destination)
Calls: 0 (total phone calls
placed)
Pages: 0 (pages transmitted)
TotPages: 0 (total pages to transmit)
Attempts: 0 (attempts to send current page)
Dirnum: 0 (directory of next page to
send)
Please kindly help me
Regards,
Sajid
From: Geoff Tait
[mailto:GTait@xxxxxxxxxxxxx]
Sent: Friday, April 16, 2004 9:27
AM
To: Sajid Fiaz
Subject: RE: [hylafax-users] 0 of
0 pages received on Hylafax server.
You have to get hylaFAX sending faxes
using it's own sendfax client before trying to use other third party clients.
Check your logs, what do they say when you
try to send a fax?
-----Original Message-----
From: Sajid Fiaz
[mailto:sajid@xxxxxxxxxxxxxxxxxx]
Sent: Friday, 16 April 2004 2:24
PM
To: Geoff Tait
Cc: hylafax-users@xxxxxxxxxxx
Subject: RE: [hylafax-users] 0 of
0 pages received on Hylafax server.
Yes I tried this command too it says fax
queued to hylafax server assigns Jobid to it. But when I check using faxstat
–svr command it says pages 0:0 in the queued faxes.
Whay U say now
Regards,
Sajid
From:
hylafax-users-bounce@xxxxxxxxxxx [mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Geoff Tait
Sent: Friday, April 16, 2004 5:52
AM
To: Sajid Fiaz
Cc: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] 0 of
0 pages received on Hylafax server.
Can you send faxes originating from the
server using the sendfax command?
-----Original Message-----
From: Sajid Fiaz
[mailto:sajid@xxxxxxxxxxxxxxxxxx]
Sent: Thursday, 15 April 2004 2:48
PM
To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] 0 of 0
pages received on Hylafax server.
Hello,
New to hylafax server, I have installed hylafax
(hylafax-4.1.8-1rh7.i386.rpm) on Redhat Linux 7.3 and using a soft modem t38modem available on http://www.openh323.org.
I am having a problem with sending a fax to hylafax server using WHFC client it
says pages 0:0 send successfully. I m trying to send PS Files also tried to
send text Files. But the Error remains the SAME.
There is no log files in /var/spool/hylafax/log/*
Please Help me to overcome this problem
Regards,
Sajid
