Re: [hylafax-users] 0 of 0 pages received on Hylafax server.

No there is noting like that

From: Geoff Tait [mailto:GTait@xxxxxxxxxxxxx]
Sent: Friday, April 16, 2004 10:23 AM
To: Sajid Fiaz
Cc: hylafax-users@xxxxxxxxxxx
Subject: RE: [hylafax-users] 0 of 0 pages received on Hylafax server.

is there anything in your syslog about hylafax? /var/log/syslog

Geoff

-----Original Message-----
From: Sajid Fiaz [mailto:sajid@xxxxxxxxxxxxxxxxxx]
Sent: Friday, 16 April 2004 3:17 PM
To: Geoff Tait
Subject: RE: [hylafax-users] 0 of 0 pages received on Hylafax server.

Dera could u tell me wher ecan I find the logs because there is no logs in /var/spool/hylafax/log/*

But when I receive a mail on console it says

---- Unsent job status ----

   Destination: 9856321
         JobID: 2
       GroupID: 57
        Sender: Nobody
      Mailaddr: root@hylafax
Submitted From: 192.168.0.1
    Page Width: 209 (mm)
   Page Length: 296 (mm)
    Resolution: 196 (lpi)
        Status:
[Job time limit exceeded]

       Dialogs: 0 (exchanges with remote device)
         Dials: 0 (consecutive failed calls to destination)
         Calls: 0 (total phone calls placed)
         Pages: 0 (pages transmitted)
      TotPages: 0 (total pages to transmit)
      Attempts: 0 (attempts to send current page)
        Dirnum: 0 (directory of next page to send)

Please kindly help me

Regards,

Sajid

From: Geoff Tait [mailto:GTait@xxxxxxxxxxxxx]
Sent: Friday, April 16, 2004 9:27 AM
To: Sajid Fiaz
Subject: RE: [hylafax-users] 0 of 0 pages received on Hylafax server.

You have to get hylaFAX sending faxes using it's own sendfax client before trying to use other third party clients.

Check your logs, what do they say when you try to send a fax?

-----Original Message-----
From: Sajid Fiaz [mailto:sajid@xxxxxxxxxxxxxxxxxx]
Sent: Friday, 16 April 2004 2:24 PM
To: Geoff Tait
Cc: hylafax-users@xxxxxxxxxxx
Subject: RE: [hylafax-users] 0 of 0 pages received on Hylafax server.

Yes I tried this command too it says fax queued to hylafax server assigns Jobid to it. But when I check using faxstat –svr command it says pages 0:0 in the queued faxes.

Whay U say now

Regards,

Sajid

From: hylafax-users-bounce@xxxxxxxxxxx [mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Geoff Tait
Sent: Friday, April 16, 2004 5:52 AM
To: Sajid Fiaz
Cc: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] 0 of 0 pages received on Hylafax server.

Can you send faxes originating from the server using the sendfax command?

Geoff

-----Original Message-----
From: Sajid Fiaz [mailto:sajid@xxxxxxxxxxxxxxxxxx]
Sent: Thursday, 15 April 2004 2:48 PM
To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] 0 of 0 pages received on Hylafax server.

Hello,

New to hylafax server, I have installed hylafax (hylafax-4.1.8-1rh7.i386.rpm) on Redhat Linux 7.3 and using a soft modem t38modem available on http://www.openh323.org. I am having a problem with sending a fax to hylafax server using WHFC client it says pages 0:0 send successfully. I m trying to send PS Files also tried to send text Files. But the Error remains the SAME.

There is no log files in /var/spool/hylafax/log/*

Please Help me to overcome this problem

Regards,

Sajid