[hylafax-users] ISDN ECM on Eicon PCI server PRI-30M

[Marcello Lupo <lupo@xxxxxxxxxxxxxxx>]

Hi to all,
i'm using hylafax with Eicon PCI server PRI-30M with latest melware drivers.
I' cannot understand why when the hylafax set the modem capabilities for 
answer (AT+FDCC) it set the ECM to 1 and not to 2 being that the modem 
supports it to be at 2.
Any advice?
Thwere is a way to force it to take my AT+FDCC command?
Thanks,
BYe,
MArcello

See the logs:

Apr  7 15:00:24 antares FaxGetty[11591]: MODEM: Model isdn4linux
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM: Revision Rev: 1.1.4.1
Apr  7 15:00:24 antares FaxGetty[11591]: <-- [10:AT+FDCC=?\r]
Apr  7 15:00:24 antares FaxGetty[11591]: --> 
[45:(0,1),(0-5),(0-2),(0-2),(0-3),(0-2),(0),(0-7)]
Apr  7 15:00:24 antares FaxGetty[11591]: --> [2:OK]
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 3.85 line/mm
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 7.7 line/mm
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 2400 bit/s
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 4800 bit/s
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 7200 bit/s
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 9600 bit/s
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 12000 bit/s
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 14400 bit/s
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports page width 1728 pixels 
in 215 mm
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports page width 2048 pixels 
in 255 mm
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports page width 2432 pixels 
in 303 mm
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports A4 page length (297 
mm)
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports B4 page length (364 
mm)
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports unlimited page length
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 1-D MR
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 2-D MR
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 2-D Uncompressed Mode
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 2-D MMR
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports no ECM
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports T.30 Annex A, ECM
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 0 ms/scanline
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 5 ms/scanline
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 10 ms, 5 ms/scanline
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 10 ms/scanline
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 20 ms, 10 ms/scanline
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 20 ms/scanline
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 40 ms, 20 ms/scanline
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 40 ms/scanline
Apr  7 15:00:24 antares FaxGetty[11591]: <-- [9:AT+FCQ=?\r]
Apr  7 15:00:24 antares FaxGetty[11591]: --> [5:0,1,2]
Apr  7 15:00:24 antares FaxGetty[11591]: --> [2:OK]
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 1D+2D copy quality 
checking (but not enabled)
Apr  7 15:00:24 antares FaxGetty[11591]: <-- [9:AT+FAP=?\r]
Apr  7 15:00:24 antares FaxGetty[11591]: --> [5:ERROR]
Apr  7 15:00:24 antares FaxGetty[11591]: <-- [10:AT+FSPL=?\r]
Apr  7 15:00:25 antares FaxGetty[11591]: --> [5:ERROR]
Apr  7 15:00:25 antares FaxGetty[11591]: <-- [12:AT+FCLASS=2\r]
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 1-D MR
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 2-D MR
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 2-D Uncompressed Mode
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 2-D MMR
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports no ECM
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports T.30 Annex A, ECM
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 0 ms/scanline
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 5 ms/scanline
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 10 ms, 5 ms/scanline
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 10 ms/scanline
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 20 ms, 10 ms/scanline
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 20 ms/scanline
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 40 ms, 20 ms/scanline
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 40 ms/scanline
Apr  7 15:00:24 antares FaxGetty[11591]: <-- [9:AT+FCQ=?\r]
Apr  7 15:00:24 antares FaxGetty[11591]: --> [5:0,1,2]
Apr  7 15:00:24 antares FaxGetty[11591]: --> [2:OK]
Apr  7 15:00:24 antares FaxGetty[11591]: MODEM Supports 1D+2D copy quality 
checking (but not enabled)
Apr  7 15:00:24 antares FaxGetty[11591]: <-- [9:AT+FAP=?\r]
Apr  7 15:00:24 antares FaxGetty[11591]: --> [5:ERROR]
Apr  7 15:00:24 antares FaxGetty[11591]: <-- [10:AT+FSPL=?\r]
Apr  7 15:00:25 antares FaxGetty[11591]: --> [5:ERROR]
Apr  7 15:00:25 antares FaxGetty[11591]: <-- [12:AT+FCLASS=2\r]
Apr  7 15:00:25 antares FaxGetty[11591]: --> [2:OK]
Apr  7 15:00:25 antares FaxGetty[11591]: <-- [10:AT+FTBC=0\r]
Apr  7 15:00:25 antares FaxGetty[11591]: --> [2:OK]
Apr  7 15:00:25 antares FaxGetty[11591]: <-- [10:AT+FBOR=0\r]
Apr  7 15:00:25 antares FaxGetty[11591]: --> [2:OK]
Apr  7 15:00:25 antares FaxGetty[11591]: <-- [13:AT+FPHCTO=30\r]
Apr  7 15:00:25 antares FaxGetty[11591]: --> [2:OK]
Apr  7 15:00:25 antares FaxGetty[11591]: <-- [24:AT+FDCC=1,5,2,2,3,1,0,0\r]
Apr  7 15:00:25 antares FaxGetty[11591]: --> [2:OK]
Apr  7 15:00:25 antares FaxGetty[11591]: MODEM ISDN4LINUX isdn4linux/Rev: 
1.1.4.1


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*