|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] No carrier detected
So far this month we've had dozens of the above error message on
outgoing faxes. Each time I've looked into it I can immediately call
the number in question and hear a fax tone; there is a fax machine on
the other end. To one number in particular we've sent faxes to many
times, looking in the historical logs the other fax machine is a Canon
Laser Class 9000 Series. Are there any other causes for this error I
can look into? Thanks.
Mar 03 13:12:15.49: [12230]: SESSION BEGIN 00006449 XX
Mar 03 13:12:15.49: [12230]: HylaFAX (tm) Version 4.1.7
Mar 03 13:12:15.49: [12230]: SEND FAX: JOB 1519 DEST 17804547698 COMMID
00006449 DEVICE '/dev/ttyS4'
Mar 03 13:12:15.49: [12230]: MODEM set DTR OFF
Mar 03 13:12:15.49: [12230]: DELAY 75 ms
Mar 03 13:12:15.57: [12230]: MODEM set DTR ON
Mar 03 13:12:15.57: [12230]: DELAY 2600 ms
Mar 03 13:12:19.18: [12230]: MODEM set baud rate: 19200 baud, input flow
XON/XOFF, output flow XON/XOFF
Mar 03 13:12:19.18: [12230]: DELAY 10 ms
Mar 03 13:12:19.19: [12230]: MODEM flush i/o
Mar 03 13:12:19.19: [12230]: <-- [4:ATZ\r]
Mar 03 13:12:19.49: [12230]: --> [2:OK]
Mar 03 13:12:19.49: [12230]: DELAY 3000 ms
Mar 03 13:12:22.49: [12230]: <-- [5:ATE0\r]
Mar 03 13:12:22.50: [12230]: --> [4:ATE0]
Mar 03 13:12:22.50: [12230]: --> [2:OK]
Mar 03 13:12:22.50: [12230]: <-- [5:ATV1\r]
Mar 03 13:12:22.51: [12230]: --> [2:OK]
Mar 03 13:12:22.51: [12230]: <-- [5:ATQ0\r]
Mar 03 13:12:22.52: [12230]: --> [2:OK]
Mar 03 13:12:22.52: [12230]: <-- [7:ATS0=0\r]
Mar 03 13:12:22.53: [12230]: --> [2:OK]
Mar 03 13:12:22.53: [12230]: <-- [7:ATS8=2\r]
Mar 03 13:12:22.54: [12230]: --> [2:OK]
Mar 03 13:12:22.54: [12230]: <-- [8:ATS7=60\r]
Mar 03 13:12:22.55: [12230]: --> [2:OK]
Mar 03 13:12:22.55: [12230]: <-- [6:AT&K4\r]
Mar 03 13:12:22.56: [12230]: --> [2:OK]
Mar 03 13:12:22.68: [12230]: <-- [14:AT+FCLASS=2.0\r]
Mar 03 13:12:22.79: [12230]: --> [2:OK]
Mar 03 13:12:22.79: [12230]: <-- [9:AT+FLO=1\r]
Mar 03 13:12:22.90: [12230]: --> [2:OK]
Mar 03 13:12:22.90: [12230]: <-- [9:AT+FPP=0\r]
Mar 03 13:12:23.01: [12230]: --> [2:OK]
Mar 03 13:12:23.01: [12230]: <-- [9:AT+FBO=0\r]
Mar 03 13:12:23.12: [12230]: --> [2:OK]
Mar 03 13:12:23.12: [12230]: <-- [10:AT+FCT=30\r]
Mar 03 13:12:23.23: [12230]: --> [2:OK]
Mar 03 13:12:23.23: [12230]: <-- [11:AT+FCQ=1,0\r]
Mar 03 13:12:23.34: [12230]: --> [2:OK]
Mar 03 13:12:23.34: [12230]: <-- [15:AT+FNR=1,1,1,1\r]
Mar 03 13:12:23.45: [12230]: --> [2:OK]
Mar 03 13:12:23.45: [12230]: <-- [13:AT+FAP=1,1,1\r]
Mar 03 13:12:23.56: [12230]: --> [2:OK]
Mar 03 13:12:23.56: [12230]: <-- [9:AT+FIE=0\r]
Mar 03 13:12:23.67: [12230]: --> [2:OK]
Mar 03 13:12:23.67: [12230]: <-- [9:AT+FBU=0\r]
Mar 03 13:12:23.78: [12230]: --> [2:OK]
Mar 03 13:12:23.78: [12230]: <-- [23:AT+FCC=1,5,2,2,3,1,0,0\r]
Mar 03 13:12:23.89: [12230]: --> [2:OK]
Mar 03 13:12:23.89: [12230]: <-- [30:AT+FLI="XXXX"\r]
Mar 03 13:12:24.00: [12230]: --> [2:OK]
Mar 03 13:12:24.00: [12230]: DIAL XXXXX
Mar 03 13:12:24.00: [12230]: <-- [31:AT+FCC=,,,,,,,,0;DTXXXXXX\r]
Mar 03 13:13:51.24: [12230]: --> [10:NO CARRIER]
Mar 03 13:13:51.24: [12230]: SEND FAILED: JOB 1519 DEST XXXXX ERR No
carrier detected
Mar 03 13:13:51.24: [12230]: <-- [5:ATH0\r]
Mar 03 13:13:51.60: [12230]: --> [2:OK]
Mar 03 13:13:51.60: [12230]: MODEM set DTR OFF
Mar 03 13:13:51.60: [12230]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Mar 03 13:13:51.60: [12230]: SESSION END
--
Steven Kurylo
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
