|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Fax gets resent three times
On 2004.02.23 13:28 jburley-spam@xxxxxxxx wrote:
> If they are getting the full page of image data, then the problem
> probably lies with the timing of Class1PPMWaitCmd which defaults to
> AT+FTS=7. You could probably increase this to AT+FTS=9 or AT+FTS=10
> without any ill effects. Maybe that would fix it.
Thanks for all your help, Lee... but, to continue... :)
I went and made the changes above in config/class1 and class1.0.
Why? Do them in etc/config.<devid>
But
in the
logs, it looks like it didn't see the change.
Because you didn't change the modem configuration file. You changed
the prototypes.
I looked for all
instances of
FTS=7 and changed those as well to 9, but those didn't change either.
The
Hylafax FAQ said that a restart is unnecessary... is this not the
case?
For sending, yes, restarting is unnecessary since the values will be
re-read upon modem initialization before sending.
Below is the most recent log. In this case you'll notice that it isn't
an MPS,
but a single page (as far as I can tell), and it also errors.
Yes, it's probably the same problem, just a different manifestation of
it.
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
