Re: [hylafax-users] CID / DID problem - better trace file output

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

On 2003.12.12 08:00 Impact wrote:
> sorry about the formatting of the trace output in the last email on
> this
> post.
>
> here is a better trace format.
> --------
>
> Original Post
> ---------
> My modem is reporting the DID number but hylafax is not picking it up.
> attached is the tty config file defining CIDnumber. attached is the
> servertrace showing the modem reporting the DID number
> ("NDID").
> put faxrcvd is called without the CIDnumber.?
>
> this trace is from on of the hylafax modems calling one of the other
> hylafax
> modems.  both are on the same digiboard datafire card and are
> identical.
>
> also, note in the servertracing that the modem seems to get setup w/
> the
>
> same AT commands at least two times.  ???

This is fixed in CVS HEAD.

> also, the modem report that it can do 2D-MMR but the fax is always
> sent
> in
> 2D-MR .  tricks to activate MMR sends?

What version of HylaFAX are you using?

> Dec 12 07:57:18 FX1 FaxGetty[9992]: --> [4:RING]
> Dec 12 07:57:18 FX1 FaxGetty[9992]: --> [12:NDID=8423721]
> Dec 12 07:57:18 FX1 FaxGetty[9992]: --> [11:NMBR=<NONE>]
> Dec 12 07:57:24 FX1 FaxGetty[9992]: MODEM TIMEOUT: reading line from
> modem
> Dec 12 07:57:24 FX1 FaxGetty[9992]: <-- [5:ATH0\r]
> Dec 12 07:57:25 FX1 FaxGetty[9992]: --> [2:OK]

And that causes you to lose CID/DID information.  You need to increase 
RingTimeout (see 'man hylafax-config').

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*