Re: [hylafax-users] CID problem

[George Bell <gbell5@xxxxxxx>]

On Saturday 22 November 2003 06:11, BAKONYI Péter - paha wrote:
> hello all!
>
> i'm new here but have a serious problem.
>
> i've installed a hylafax configuration.  sending and receiving fax are
> okay but i have problems with CID:
>
> it seems that hylafax knows absolutely nothing about the caller id!!!
>
> in etc/config.ttyS2 i've defined:
>
> QualifyCID:             etc/cid
> CIDNumber:              "NMBR = "
> CIDName:                "NAME = "
>
> i've checked etc/cid with tsitest and it's okay.
>
> my modem (a class1 one) supports cid because when i start minicom ant
> give an at#cid=1 command i have a report after the first ring:
>

CID may not be enabled.
You might try adding "at#cid=1" to ModemResetCmds or enable cid 
permanently on your modem with the AT&W1 command with minicom
if your modem supports that.  If it's working 
a line containing NAME= and NMBR= should appear in /var/log/messages if
servertracing is enabled.

George 


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*