Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] newbie question: troubleshoot sendfax error messages
Hi,
I'm new to hylafax. Tried the faq and the archives for a solution to
this, hope someone here can help.
After re-running faxaddmodem to reconfigure my modem from class 2.0 to
1, I now get the following errors when testing with sendfax (:
root@hyla log # sendfax -n -D -d wxxxyyyzzz /home/jonathan/testpage
Trying fax device '/dev/tty4c'... cannot open!
Trying fax device '/dev/tty4d'... cannot open!
sendfax: cannot access fax device(s) (locked?)
This odd since the only serial port entered during setup was /dev/ttyS4.
probemodem finds the modem fine, faxes can be received. There is no
/dev/tty4c or d on the machine.
/sbin/init q produces the following log output:
Oct 18 08:06:18 [init] Re-reading inittab
Oct 18 08:06:27 [FaxGetty] MODEM USR U.S. Robotics 56K FAX INT
V5.20.4/Configuration Profile..._Product type US/Canada
Internal_Product ID: 66297700_Options
V32bis,V.80,V.34+,x2,V.90_Fax Options Class 1/Class 2.0_Line
Options Caller ID, Distinctive Ring_Clock Freq
92.0Mhz_EPROM 256k_RAM 32k_FLASH
date 5/16/2001_FLASH rev 5.20.4_DSP date
5/16/2001_DSP rev 5.20.4
faxstat:
HylaFAX scheduler on localhost: Running
Modem ttyS4 (w xxx yyy zzzz): Running and idle
Restoring config.ttyS4.sav to config.ttyS4 did not help. Can someone
point me in the right direction?
Thanks.
Jonathan
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*