|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Multi-Tech ZMA v.92 (1.28C firmware) sending is still not right.
On 2003.10.15 11:32 Lee Howard wrote:
In overseas communications we generally assume a fair amount of line
noise (this is not necessarily true, though). In such situations,
ECM is *highly* advantageous and EOR should be enabled (AT+FRY=4 in
Class 2.0). Because you should enable EOR you probably shouldn't use
Class 2.1 (V.34 faxing/SuperG3) because you can't do EOR with V.34.
If ECM is not an option (because the receiver doesn't support it)...
then sometimes starting out at a slower speed will help because
you'll eventually "slow down" to V.27 ter sooner.
Ugh. Please change all instances of "EOR" to "CTC" in the above
paragraph.
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
