Re: [hylafax-users] Mdk9.1, 2.4.21-0-25, hylafax-4.1.5-1mdk, capi4hylafax-4.1.5-41, AVM fritz classic

[Holger Raschke <holger.raschke@xxxxxxxxxxxxxx>]

>  > capi start:

Shouldn't this be capiinit start?

> fcclassic       -       -(0)    0x240   10      -       -
> Warning: loading 
> /lib/modules/2.4.21-0.25mdk/kernel/3rdparty/avm/fcclassic.o.gz will 
> taint the kernel: non-GPL license - Proprietary
>   See http://www.tux.org/lkml/#export-tainted for information about 
> tainted modules
> Module fcclassic loaded, with warnings
> 1 fcclassic  running  fritz-isa        A1 3.10-02 0x0240 10
>
>
>
> /var/log/messages:
> Okt 12 22:39:20 anthrax FaxQueuer[3537]: MODEM /dev/faxCAPI appears to 
> be wedged
> Okt 12 22:39:20 anthrax FaxQueuer[3537]: MODEM WEDGED: bin/wedged 
> "faxCAPI" "/dev/faxCAPI"

It seems that you added the virtual CAPI-Modem as /dev/faxCAPI to 
hylafax. The CAPI-Device can't be accessed in this way.
You should use the config.faxCAPI file installed by capi4hylafax as 
modem-config-file.

c2faxrecv should be running and have an entry in /etc/inittab.

May be you could describe your problem more precisely:
- is the AVM-firmware working properly?
- is receiving with c2faxrecv possible?
- is sending with c2faxsend possible?

--
Holger


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*