Re: [hylafax-users] Get the full dialed number

[Holger Raschke <holger.raschke@xxxxxxxxxxxxxx>]

> I didn't see the number in the logfile, only the last two numbers (ie 53)
> instead of the full +43 2 480372553.
>
>
> Oct 03 10:01:55.65: [ 2010]: c2faxrecv - INFO: Incoming fax call on
> controller 1 from 06764205511 to 53.

If you have configured DDI in your config.faxCAPI the behaviour is OK.
In case of doubt post the config-file.

If you didn't configure DDI i think the PBX has to be modified to send 
the whole number to your ISDN-Controller.

--
Holger

> Oct 03 10:02:21.21: [ 2010]: c2faxrecv - INFO: Connection established.
> Oct 03 10:02:21.21: [ 2010]: c2faxrecv - INFO:  StationID = Fax
>
> Oct 03 10:02:21.21: [ 2010]: c2faxrecv - INFO:  BaudRate  = 9600
> Oct 03 10:02:21.21: [ 2010]: c2faxrecv - INFO:  Flags     = HighRes,
> MR_compr, No_ECM
> Oct 03 10:02:21.21: [ 2010]: c2faxrecv - INFO: Write fax in path
> /var/spool/fax to file recvq/fax00033.tif.
> Oct 03 10:02:52.84: [ 2010]: c2faxrecv - INFO: Page 1 was received.
> Oct 03 10:03:02.41: [ 2010]: c2faxrecv - INFO: Page 2 was received. - Last
> Page!
> Oct 03 10:03:06.76: [ 2010]: c2faxrecv - INFO: Fax received and calling
> '/var/spool/fax/bin/faxrcvd "recvq/fax00033.tif" "faxtomail.at" "00000051"
> "" "Fax                 " "" "53"'.
> Oct 03 10:03:07.13: [ 2010]: c2faxrecv - INFO: Connection is droped with
> reason 0x3400 (No additional information).
> Oct 03 10:03:07.13: [ 2010]: c2faxrecv - INFO: SESSION END
>
> -----Original Message-----
> From: Kostik [mailto:kostik@xxxxxxx] 
> Sent: Freitag, 03. Oktober 2003 10:05
> To: Walter Asperl
> Subject: Re: [hylafax-users] Get the full dialed number
>
> What about to parse log files?
>
> ----- Original Message -----
> From: "Walter Asperl" <asperl@xxxxxxxx>
> To: <hylafax-users@xxxxxxxxxxx>
> Sent: Friday, October 03, 2003 10:36 AM
> Subject: [hylafax-users] Get the full dialed number
>
>
>
> > My hylafxserver works behind a AGFEO AS 191 PBX with a ISDN Fritz Card.
> > It work's fine but I want to 'see' the full dialed number.
> > Now I only get the last 2
> >
> > Example: someone sends a fax to 4803725-69 the program faxrcvd is called
> > with 69. I need that the faxrcvd is called with the full number
> > (48037269)
> >
> > Has anyone an idea?
> >
> > Thanks
> >
> > Walter


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*