|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] HylaFax - recieve
On 2003.10.01 21:22 Kostik wrote:
Oct 02 08:05:26.27: [ 1756]: REMOTE wants 9600 bit/s
Oct 02 08:05:26.27: [ 1756]: REMOTE wants page width 1728 pixels in
215 mm
Oct 02 08:05:26.27: [ 1756]: REMOTE wants unlimited page length
Oct 02 08:05:26.27: [ 1756]: REMOTE wants 3.85 line/mm
Oct 02 08:05:26.27: [ 1756]: REMOTE wants 2-D MR
Oct 02 08:05:26.27: [ 1756]: --> [7:CONNECT]
Oct 02 08:05:26.27: [ 1756]: RECV: begin page
Oct 02 08:05:26.27: [ 1756]: RECV: send trigger 021
Oct 02 08:05:26.27: [ 1756]: <-- data [1]
Oct 02 08:06:46.79: [ 1756]: <-- data [1]
Oct 02 08:06:46.79: [ 1756]: RECV: Missing EOL after 5 seconds
Notice that we don't get any data from the remote for 80 seconds... so
either the remote is not actually sending image data, the modem's Class
2 is broken, or we're sending the wrong trigger. See 'man
hylafax-config' under Class2RecvDataTrigger.
I use mgetty as described at http://www.hylafax.org/HylaFAQ/Q343.html
Mgetty by itself (stand-alone) recieves faxes well.
Then we can assume the modem's Class 2 is not broken and it's probably
Class2RecvDataTrigger.
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
