Re: [hylafax-users] MultiTech MT5634ZBA-DID

[Pascal DeMilly <list.hylafax@xxxxxxxxxxxxxx>]

I have 2 of those modems on 2 rotary DID lines serving 40 numbers so
far. I have mixed results with it. I had to write a cron to kill
faxgetty every 15 minutes to force a reset otherwise I kept getting busy
signals. It still happens but maybe once a week now. Reseting physically
the modem fixes it or sometimes calling the phone company for them to
bring the line back up. So basically I am only 80% satisfied. 

Is it happening to anybody else?

On Mon, 2003-09-29 at 11:12, Jeff Pau wrote:
> I attached the config file here.  What sort of init string did you use?
> I set it up on a receive-only environment using analog DDI.  I have a
> little problem though.  The modem sometimes 'wedged' when it is idle for
> a while, but on a retry, it will normally be ok.  Otherwise, it is ok.
> Does any one have a similar problem?
> Anyone, upgraded to the new firmware?
> 
> jeff
> 
> -----Original Message-----
> From: hylafax-users-bounce@xxxxxxxxxxx
> [mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Jeff Herring
> Sent: Monday, September 29, 2003 9:50 PM
> To: Jeff Pau
> Cc: hylafax-users@xxxxxxxxxxx
> Subject: Re: [hylafax-users] MultiTech MT5634ZBA-DID
> 
> At 04:04 PM 9/27/2003 +0800, Jeff Pau wrote:
> >i got it working too.  what do you need for help?  what is your problem
> now,
> >if any?
> 
> No Problem, just wondering if any special configuration was done, either
> on 
> MODEM
> or in Hylafax itself...e.g. Special Config file or other experiences
> with 
> this MODEM
> and DID in general.
> 
> 
> >----- Original Message -----
> >From: "Jeff Herring" <jeffh@xxxxxxxxx>
> >To: <hylafax-users@xxxxxxxxxxx>
> >Sent: Saturday, September 27, 2003 1:47 AM
> >Subject: [hylafax-users] MultiTech MT5634ZBA-DID
> >
> >
> > > Flame On if it's been answered before...
> > >
> > > Does anyone have (analog) DID working on the MT5643ZBA-DID modem?
> > > Working config / modified faxrcvd?
> > >
> > > -Jeff H.
> > >
> > > --------------------------------------
> > > Jeff Herring  /  jeffh@xxxxxxxxx
> > > Seacoast Laboratory Data Systems, Inc.
> > > --------------------------------------
> > >
> > >
> > > ____________________ HylaFAX(tm) Users Mailing List
> >_______________________
> > >   To subscribe/unsubscribe, click
> >http://lists.hylafax.org/cgi-bin/lsg2.cgi
> > >  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
> >/dev/null
> > >   *To learn about commercial HylaFAX(tm) support, mail
> sales@xxxxxxxxxxxx*
> > >
> > >
> 
> --------------------------------------
> Jeff Herring  /  jeffh@xxxxxxxxx
> Seacoast Laboratory Data Systems, Inc.
> Voice:  603 431 4114  x14
> FAX:    603 431 2112
> --------------------------------------
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>   To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
> /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail
> sales@xxxxxxxxxxxx*
-- 
Pascal DeMilly
NGSI
Director R&D
Tel: (949) 497-4669
eFax: (949) 497-6608
Pager: (909) 399-7834
mailto:pascal@xxxxxxxxxxxxxx


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*