|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Failure to receive silence
Hello, every1!
May be somebody can help me.
For some days I cann't get my hylafax
working properly. I have redhat 7.3 and hylafax 4.1.5
Every time the fax is being received
in the end of the log I get
"Failure to receive silence"
I was reading news groups and mailing lists
and found that adding a line
Class1SwitchingCmd: "<delay:7>"
to config file may help, but it didn't
if you have some ideas about what can be done please reply
Here goes some log information:
log file:
Aug 19 14:07:17.95: [16317]: SESSION BEGIN 00000022 13717277708
Aug 19 14:07:17.95: [16317]: HylaFAX (tm) Version 4.1.5
Aug 19 14:07:17.95: [16317]: <-- [4:ATA\r]
Aug 19 14:07:22.93: [16317]: --> [7:CONNECT]
Aug 19 14:07:22.93: [16317]: ANSWER: FAX CONNECTION DEVICE
'/dev/ttyS0'
Aug 19 14:07:22.93: [16317]: RECV FAX: begin
Aug 19 14:07:22.93: [16317]: <-- data [23]
Aug 19 14:07:22.93: [16317]: <-- data [2]
Aug 19 14:07:24.07: [16317]: --> [7:CONNECT]
Aug 19 14:07:24.07: [16317]: <-- data [10]
Aug 19 14:07:24.07: [16317]: <-- data [2]
Aug 19 14:07:24.51: [16317]: --> [2:OK]
Aug 19 14:07:24.51: [16317]: <-- [9:AT+FRH=3\r]
Aug 19 14:07:25.08: [16317]: --> [7:CONNECT]
Aug 19 14:07:26.89: [16317]: --> [2:OK]
Aug 19 14:07:26.89: [16317]: REMOTE TSI "00371 7383121"
Aug 19 14:07:26.89: [16317]: <-- [9:AT+FRH=3\r]
Aug 19 14:07:26.92: [16317]: --> [7:CONNECT]
Aug 19 14:07:27.25: [16317]: --> [2:OK]
Aug 19 14:07:27.25: [16317]: REMOTE wants 14400 bit/s
Aug 19 14:07:27.25: [16317]: REMOTE wants page width 1728 pixels in
215 mm
Aug 19 14:07:27.25: [16317]: REMOTE wants unlimited page length
Aug 19 14:07:27.25: [16317]: REMOTE wants 7.7 line/mm
Aug 19 14:07:27.25: [16317]: REMOTE wants 2-D MR
Aug 19 14:07:27.25: [16317]: RECV training at v.17 14400 bit/s
Aug 19 14:07:27.25: [16317]: <-- [11:AT+FRM=145\r]
Aug 19 14:07:28.96: [16317]: --> [7:CONNECT]
Aug 19 14:07:30.44: [16317]: RECV: TCF 2656 bytes, 0% non-zero, 2645
zero-run
Aug 19 14:07:30.44: [16317]: --> [10:NO CARRIER]
Aug 19 14:07:30.44: [16317]: DELAY 75 ms
Aug 19 14:07:30.52: [16317]: TRAINING succeeded
Aug 19 14:07:30.52: [16317]: <-- [9:AT+FTH=3\r]
Aug 19 14:07:30.56: [16317]: --> [7:CONNECT]
Aug 19 14:07:30.56: [16317]: <-- data [3]
Aug 19 14:07:30.56: [16317]: <-- data [2]
Aug 19 14:07:31.30: [16317]: --> [2:OK]
Aug 19 14:07:31.30: [16317]: <-- [11:AT+FRM=146\r]
Aug 19 14:07:32.38: [16317]: --> [7:CONNECT]
Aug 19 14:07:32.38: [16317]: RECV: begin page
Aug 19 14:07:38.22: [16317]: RECV: 2313 total lines, 0 bad lines, 0
consecutive bad lines
Aug 19 14:07:38.22: [16317]: RECV: end page
Aug 19 14:07:38.22: [16317]: --> [10:NO CARRIER]
Aug 19 14:07:38.22: [16317]: <-- [9:AT+FRH=3\r]
Aug 19 14:07:38.26: [16317]: --> [7:CONNECT]
Aug 19 14:07:39.47: [16317]: --> [2:OK]
Aug 19 14:07:39.47: [16317]: RECV recv EOP (no more pages or
documents)
Aug 19 14:07:39.47: [16317]: <-- [9:AT+FRS=7\r]
Aug 19 14:08:09.47: [16317]: MODEM <Timeout>
Aug 19 14:08:09.47: [16317]: RECV FAX (00000022): recvq/fax00009.tif
from 00371 7383121, route to <unspecified>, 0 pages in 0:47
Aug 19 14:08:09.47: [16317]: RECV FAX: Failure to receive silence.
Aug 19 14:08:09.47: [16317]: <-- [9:AT+FTH=3\r]
Aug 19 14:08:09.48: [16317]: --> [2:OK]
Aug 19 14:08:09.48: [16317]: RECV FAX (00000022): session with 00371
7383121 terminated abnormally: Failure to receive silence.
Aug 19 14:08:09.48: [16317]: RECV FAX: bin/faxrcvd
"recvq/fax00009.tif" "ttyS0" "00000022" "Failure to receive silence."
"" ""
Aug 19 14:09:09.61: [16317]: RECV FAX: end
Aug 19 14:09:09.61: [16317]: SESSION END
probemodem output:
Probing for best speed to talk to modem: 38400 OK.
This looks like a Class 1 modem.
ATI0 RESULT = "OK" RESPONSE = "1.0"
ATI1 RESULT = "OK" RESPONSE = "CD04.08 - 604C.6 SERIAL
(V.90-ONLY) SPEAKERPHONE 05 - DSP PATCH: 103.11"
ATI2 RESULT = "OK" RESPONSE = "ROM TEST OK"
ATI3 RESULT = "OK" RESPONSE = "CL-MD56xx"
ATI4 RESULT = "OK" RESPONSE = "CIRRUS LOGIC, INC. MODEM
ENGINEERING FIRMWARE DEPARTMENT"
ATI5 RESULT = "OK" RESPONSE = "Present, 32K DSP RAM.000"
ATI6 RESULT = "OK" RESPONSE = "CTR 21"
ATI7 RESULT = "OK" RESPONSE = "CIRRUS LOGIC, INC. MODEM
ENGINEERING FIRMWARE DEPARTMENT"
ATI8 RESULT = "OK" RESPONSE = "1310"
ATI9 RESULT = "CIR31004159\MODEM" RESPONSE = "CIR31004159\MODEM"
Class 1 stuff...
AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,8"
AT+FCLASS? RESULT = "OK" RESPONSE = "1"
AT+FCLASS=0 RESULT = "AT+FCLASS=0" RESPONSE = ""
AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS? RESULT = "OK" RESPONSE = "1"
AT+FJUNK=? RESULT = "AT+FJUNK=?" RESPONSE = ""
AT+FJUNK? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FAA=? RESULT = "OK" RESPONSE = "(0-1)"
AT+FAA? RESULT = "OK" RESPONSE = "0"
AT+FAE=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FAE? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FTH=? RESULT = "AT+FTH=?" RESPONSE = ""
AT+FRH=? RESULT = "OK" RESPONSE = "3"
AT+FTM=? RESULT = "OK" RESPONSE =
"24,48,72,73,74,96,97,98,121,122,145,146"
AT+FRM=? RESULT = "AT+FRM=?" RESPONSE = ""
AT+FTS=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FRS=? RESULT = "ERROR" RESPONSE = "ERROR"
config.ttyS0
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
ModemType: Class1 # use this to supply a hint
ModemRate: 57600 # rate for DCE-DTE
communication
ModemFlowControl: rtscts # RTS/CTS flow control assumed
#
ModemSoftFlowCmd: AT\Q1 # set desired flow control
method
ModemHardFlowCmd: AT\Q3 # set desired flow control
method
ModemSetupDTRCmd: AT&D3 # setup so DTR drop resets
modem
ModemSetupDCDCmd: AT&C1 # setup so DCD follows carrier
ModemDialCmd: ATDT%s
#
# Happy days! This modem has proper support for querying
# the model, manufacturer, and firmware revision!
#
ModemMfrQueryCmd: AT+FMFR?
ModemModelQueryCmd: AT+FMDL?
ModemRevQueryCmd: AT+FREV?
Class1SwitchingCmd: "<delay:7>"
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
