|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Multitech MT5634ZPX-PCI config
On 2003.07.31 09:05 Tjardick van der Kraan wrote:
> Jul 31 16:45:36.31: [17777]: REMOTE wants 2-D MR
> Jul 31 16:45:36.31: [17777]: <-- [9:AT+FRH=3\r]
> Jul 31 16:45:36.32: [17777]: --> [7:CONNECT]
> Jul 31 16:45:36.37: [17777]: --> [10:NO CARRIER]
> Jul 31 16:45:36.37: [17777]: RECV training at v.17 14400 bit/s
> Jul 31 16:45:36.37: [17777]: MODEM set XON/XOFF/DRAIN: input ignored,
> output
> generated
> Jul 31 16:45:36.37: [17777]: <-- [11:AT+FRM=145\r]
> Jul 31 16:45:40.87: [17777]: --> [0:]
> Jul 31 16:45:40.87: [17777]: MODEM <Empty line>
> Jul 31 16:45:40.87: [17777]: MODEM TIMEOUT: receiving TCF
> Jul 31 16:45:40.87: [17777]: --> [2:]
> Jul 31 16:45:40.87: [17777]: --> [2:OK]
> Jul 31 16:45:40.87: [17777]: MODEM set XON/XOFF/DRAIN: input ignored,
> output
> disabled
Remove Class1TCFRecvHack from your config file, restart faxgetty, and
try again.
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
