Re: [hylafax-users] Fax receive EOP or MPN problem

[mathfretwell@blueyonder.co.uk]

>It should probably use the config/cirrus config file, and it appears
>that it doesn't support +FRS (although it does support +FTS).  Are
>there others listening who use the Cirrus Logic chipsets?  Do all
>Cirrus Logic chipsets not support +FRS?  In other words, do we need to
>add that to the config/cirrus config file template, or do we need to
>write a new config file template for the CL-MD56xx series?

This is the probemodem output from a swannsmart turbo, which uses the
same chipset. Don't know if this is helps, in response to your
question, but here it is.

ATI0    RESULT = "OK"   RESPONSE = "57600"
ATI1    RESULT = "OK"   RESPONSE = "CD08.55 - 642.56 SERIAL -
 SPEAKERPHONE 01 - DSP PATCH: 001.65"
ATI2    RESULT = "OK"   RESPONSE = "ROM TEST OK"
ATI3    RESULT = "OK"   RESPONSE = "CL-MD56xx"
ATI4    RESULT = "OK"   RESPONSE = "CIRRUS LOGIC, INC.  MODEM
 ENGINEERING  FIRMWARE DEPARTMENT"
ATI5    RESULT = "OK"   RESPONSE = "Present, 32K DSP RAM.000"
ATI6    RESULT = "OK"   RESPONSE = "CTR21 21"
ATI7    RESULT = "OK"   RESPONSE = "CIRRUS LOGIC, INC.  MODEM
 ENGINEERING  FIRMWARE DEPARTMENT"
ATI8    RESULT = "OK"   RESPONSE = "1310"
ATI9    RESULT = "OK"   RESPONSE = "CIR31004159\MODEM\PNPC107,
 ATM0096,TBC3100.K External Modem[CL]72"

Class 1 stuff...

AT+FCLASS=?     RESULT = "OK"   RESPONSE = "0,1,8"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
AT+FCLASS=0     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS=1     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
AT+FJUNK=?      RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FJUNK?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAA=?        RESULT = "OK"   RESPONSE = "(0-1)"
AT+FAA? RESULT = "OK"   RESPONSE = "0"
AT+FAE=?        RESULT = "OK"   RESPONSE = "(0-1)"
AT+FAE? RESULT = "OK"   RESPONSE = "0"
AT+FTH=?        RESULT = "OK"   RESPONSE = "3"
AT+FRH=?        RESULT = "OK"   RESPONSE = "3"
AT+FTM=?        RESULT = "OK"   RESPONSE = "24,48,72,73,74,96,97,98,121,122,145,146"
AT+FRM=?        RESULT = "OK"   RESPONSE = "24,48,72,73,74,96,97,98,121,122,145,146"
AT+FTS=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FRS=?        RESULT = "ERROR"        RESPONSE = "ERROR"


BTW, the Class1SwitchingCmd:     "<delay:7>", worked fine with the
same problem on this modem.

mathfretwell@blueyonder.co.uk

P.S. Sorry if anyone got a spam block message earlier. MUA went weird and
screwed up first attempt at this message.


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*