Re: [hylafax-users] Fax receive EOP or MPN problem

[John Sved <JohnSved@compuserve.com>]

Title:

Giulio Orsero wrote:
>  
> On Thu, 17 Jul 2003 15:34:39 +0200, John Sved <JohnSved@compuserve.com>
> wrote:
>
> > I am using Hylafax 4.1.5  (latest SuSE 8.2 downloaded patch) in a stand 
> > alone PC with Creatix V90 external modem.  
> >   
>
> Solution is to add
> Class1SwitchingCmd:     "<delay:7>"
> to your $SPOOL/etc/config.<devid>
The syntax of the ClassSwitchingCmd       seems to be either AT+FRS=7   or
 "<delay:7>"  as you have suggested.  Neither had a positive effect.


I have tried Class1 ....... parameters listed in the standard Class 1 modem
config file.   
No change: still fails at EOP or MPS.

> Questions:
> 1) has your config.<devid> been created with 4.1.5 version of HylaFAX?
Yes.  I renamed the /var/spool/fax/etc/conf.ttyS0  file.    Then I ran faxaddmodem.

> 2) If 1=yes, please, send to list output of "probemodem ttySX"

:~ # probemodem ttyS0

Now we are going to probe the tty port.  This takes a few seconds,
so be patient.  Note that if you do not have the modem cabled to
the port, or the modem is turned off, this may hang (just go and
cable up the modem or turn it on, or whatever).

Probing for best speed to talk to modem: 38400 OK.

This looks like a Class 1 modem.

ATI0    RESULT = "OK"   RESPONSE = "56000"
ATI1    RESULT = "OK"   RESPONSE = "ROM TEST OK"
ATI2    RESULT = "OK"   RESPONSE = "CD08.55 - 643 SERIAL (V.90-ONLY) SPEAKERPHON

             E 01"
ATI3    RESULT = "OK"   RESPONSE = "CL-MD56xx"
ATI4    RESULT = "OK"   RESPONSE = "CCCVGEXX  V2.00 30/04/98"
ATI5    RESULT = "OK"   RESPONSE = "Present, 32K DSP RAM.000"
ATI6    RESULT = "OK"   RESPONSE = "Germany 49"
ATI7    RESULT = "OK"   RESPONSE = "OK"
ATI8    RESULT = "OK"   RESPONSE = "OK"
ATI9    RESULT = "OK"   RESPONSE = "CTX3260S45678\MODEM\CTX3260\Creatix V90
3F"

Class 1 stuff...

AT+FCLASS=?     RESULT = "OK"   RESPONSE = "0,1,8"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
AT+FCLASS=0     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS=1     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
AT+FJUNK=?      RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FJUNK?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAA=?        RESULT = "OK"   RESPONSE = "(0-1)"
AT+FAA? RESULT = "OK"   RESPONSE = "0"
AT+FAE=?        RESULT = "OK"   RESPONSE = "(0-1)"
AT+FAE? RESULT = "OK"   RESPONSE = "0"
AT+FTH=?        RESULT = "OK"   RESPONSE = "3"
AT+FRH=?        RESULT = "OK"   RESPONSE = "3"
AT+FTM=?        RESULT = "OK"   RESPONSE =
"24,48,72,73,74,96,97,98,121,122,145,146"
AT+FRM=?        RESULT = "OK"   RESPONSE =
"24,48,72,73,74,96,97,98,121,122,145,146"
AT+FTS=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FRS=?        RESULT = "ERROR"        RESPONSE = "ERROR"
:~ #


> 3) If 1=no, then please back up your config.<devid> file, delete it, run
> "faxaddmodem ttySX" and see if it gets the Class1SwitchingCmd param added
> automatically, then restore it.
Class1SwitchingCmd or similar Class1......  parameters were not added by faxaddmodem.

Should I try one of the /config/files ?


--  John