Re: [hylafax-users] Setting Inbound Capabilities on aper/senderBasis?

[Bill Binko <bill-sender-4b2fd6@binko.net>]

Ok, I'm going to try Lee's quick-fix (ModemAnswerCmd:  "AT+FCC=,5;A")
first, and see what the effect is.  
I wanted to only do this for the one caller, but at this point, I'm
going to go ahead and drop back to 14.4 for everyone for now.

I will update the list on the effect.  

Bill

> -----Original Message-----
> From: hylafax-users-bounce@hylafax.org 
> [mailto:hylafax-users-bounce@hylafax.org] On Behalf Of Lee Howard
> Sent: Monday, June 09, 2003 4:43 PM
> To: Bill Binko
> Cc: hylafax-users@hylafax.org
> Subject: Re: [hylafax-users] Setting Inbound Capabilities on 
> aper/senderBasis?
> 
> 
> On 2003.06.09 13:34 Bill Binko wrote:
> 
> > However, is there a benefit to using Class 1 over Class2.0?
> 
> That depends on if you're experiencing any problems with 
> Class 2.0 and 
> if you use any Class 2.0 features that aren't present in HylaFAX's 
> Class 1 implementation.
> 
> In your case (MT5634 series) you'd miss out on RTFCC, ECM, and MMR 
> support but you'd also miss out on the error.
> 
> > I believe
> > that I am only getting the errors when I am using 
> connections > 14.4K 
> > (i.e. Class2.1/V.34fax/whatever the right name for 
> high-speed faxing 
> > is).  I should be able to drop down to Class2.0 with the a simple 
> > config setting, correct?
> 
> Yes, if the error is only with V.34 ("Super G3") faxes, then it could 
> be alleviated by re-running faxaddmodem and selecting Class 2.0.
> 
> You could use a combined Class 2.0+Class 2.1 config file to send in 
> Class 2.1 while receiving in Class 2.0.
> 
> However, both of these would be more easily accomplished with:
> 
> ModemAnswerCmd:  "AT+FCC=,5;A"
> 
> That would restrict your modem from receiving V.34-faxes and should 
> force all callers to use V.17 (14400) as the ceiling.
> 
> Lee.
> 
> ____________________ HylaFAX(tm) Users Mailing List 
> _______________________
>   To subscribe/unsubscribe, click 
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s 
> unsubscribe hylafax-users-request@hylafax.org < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail 
> sales@hylafax.org.*
> 
> 

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*