Re: [hylafax-users] Setting Inbound Capabilities on aper/senderBasis?

[Steve Tuckner <STUCKNER@MULTITECH.COM>]

Unfortunately, once the call has started in V.34 mode, there is no switching
back to V.17/V.29/V.27ter, etc. The decision to go V.34 is done right after
the call is answered. If you disable V.34 (by setting baud rate to <= 5),
can you receive from these machines?

Steve Tuckner

> -----Original Message-----
> From: hylafax-users-bounce@hylafax.org
> [mailto:hylafax-users-bounce@hylafax.org]On Behalf Of Bill Binko
> Sent: Monday, June 09, 2003 3:35 PM
> To: 'Lee Howard'; 'Bill Binko'
> Cc: hylafax-users@hylafax.org
> Subject: Re: [hylafax-users] Setting Inbound Capabilities on
> aper/senderBasis?
>
>
> > > I would like to setup Hylafax to only reduce its
> capabilities when
> > > this particular TSI (or CID) number is seen.  Is that
> > possible?  I see
> > > how to
> > > do it for sending (through the info directory).  How can
> I make this
> > > work for inbounds?
> >
> > This is impossible to do based on TSI because we send DIS (our
> > capabilities) before we hear TSI.
> >
> > This *could* be done based on CID, but there is no function for
> > "SenderControls" like this.  If this is problematic to you
> > then I would
> > recommend that you use Class 1 for the time being.
>
> Ok, I get the part about TSI (should've read the logs better first).
>
> However, is there a benefit to using Class 1 over Class2.0?  I believe
> that I am only getting the errors when I am using connections > 14.4K
> (i.e. Class2.1/V.34fax/whatever the right name for high-speed faxing
> is).  I should be able to drop down to Class2.0 with the a
> simple config
> setting, correct?
>
> Bill
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>   To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*