Re: [hylafax-users] Automatic fax printing....!?!

[Shafeer Hajamohideen <shafeer@dichtelemente.de>]

Thanks for your response.

> > Fax received and calling '/var/spool/fax/bin/faxrcvd
> > "recvq/fax00001.tif" "faxCAPI" "00000002" "" "+49 40 77291010" "" "50"'.
> 
> faxrcvd is called with 7 parameters. This is the case since version 4.1.3.

I thought if it would really affect this issue, when there is a $FILE
then print it to the printer mentioned in the script. is that right?
 
> 
> > 
> > My faxrcvd script looks like this ( where i've included a line
> > /usr/bin/tiff2ps -a $FILE | /usr/bin/lpr -P Verkauf to print the
> > incoming fax)
> > 
> > #! /bin/sh
> > #	$Id: faxrcvd.sh.in,v 1.1 2001/04/15 03:48:16 darren Exp $
> > #
> > # faxrcvd file devID commID error-msg destination
> > #
> > if [ $# -lt 5 ]; then
> >     echo "Usage: $0 file devID commID error-msg destination"
> >     exit 1
> > fi

Should I change 5 to 7 here as well ?

> Your faxrcvd-script just demands 5 parameters!
> You have a version conflict.
> 

I'm not sure where lies the version conflict or between what?  I've
installed hylafax 4.1 and capi4hylafax for SuSe 7.3. Faxes are send
using the command sendfax.

> > 
> > test -f etc/setup.cache || {
> >     SPOOL=`pwd`
> >     cat<<EOF
> > 
> > FATAL ERROR: $SPOOL/etc/setup.cache is missing!
> > 
> > The file $SPOOL/etc/setup.cache is not present.  This
> > probably means the machine has not been setup using the faxsetup(8C)
> > command.  Read the documentation on setting up HylaFAX before you
> > startup a server system.
> > 
> > EOF
> >     exit 1
> > }
> > . etc/setup.cache
> > 
> > INFO=$SBIN/faxinfo
> > FAX2PS=$TIFFBIN/fax2ps
> > TOADDR=FaxMaster
> > #
> > # There is no good portable way to find out the fully qualified
> > # domain name (FQDN) of the host or the TCP port for the hylafax
> > # service so we fudge here.  Folks may want to tailor this to
> > # their needs; e.g. add a domain or use localhost so the loopback
> > # interface is used.
> > #
> > HOSTNAME=`hostname`			# XXX no good way to find FQDN
> > PORT=4559				# XXX no good way to lookup service
> > 
> > FILE="$1"
> > DEVICE="$2"
> > COMMID="$3"
> > MSG="$4"
> > 
> > if [ -f $FILE ]; then
> >     #
> >     # Check the sender's TSI and setup to dispatch
> >     # facsimile received from well-known senders.
> >     #
> >     SENDER="`$INFO $FILE | $AWK -F: '/Sender/ { print $2 }'
> > 2>/dev/null`"
> >     SENDTO=
> >     if [ -f bin/FaxDispatch ]; then
> > 	. bin/FaxDispatch	# NB: FaxDispatch sets SENDTO based on $5
> >     fi
> >     (echo "To: $TOADDR"
> >      echo "From: The HylaFAX Receive Agent <fax>"
> >      echo "Subject: facsimile received from $SENDER";
> >      echo ""
> >      echo "$FILE (ftp://$HOSTNAME:$PORT/$FILE):"; $INFO -n $FILE
> >      echo "ReceivedOn: $DEVICE"
> >      if [ "$MSG" ]; then
> > 	echo ""
> > 	echo "The full document was not received because:"
> > 	echo ""
> > 	echo "    $MSG"
> > 	echo ""
> > 	echo "    ---- Transcript of session follows ----"
> > 	echo ""
> > 	if [ -f log/c$COMMID ]; then
> > 	    $SED -e '/-- data/d' \
> > 		 -e '/start.*timer/d' -e '/stop.*timer/d' \
> > 		 log/c$COMMID
> > 	elif [ -n "$COMMID" ]; then
> > 	    echo "    No transcript available (CommID c$COMMID)."
> > 	else
> > 	    echo "    No transcript available."
> > 	fi
> >      else
> > 	echo "CommID:     c$COMMID (ftp://$HOSTNAME:$PORT/log/c$COMMID)"
> >      fi
> >      if [ -n "$SENDTO" ]; then
> > 	echo ""
> > 	echo "The facsimile was automatically dispatched to: $SENDTO."
> >      else
> >         /usr/bin/tiff2ps -a $FILE | /usr/bin/lpr -P Verkauf
> >      fi

I tried the above statement earlier as well.

> >     ) | 2>&1 $SENDMAIL -ffax -oi $TOADDR
> >     if [ -n "$SENDTO" ]; then
> > 	(MIMEBOUNDARY="NextPart$$"
> > 	 echo "Mime-Version: 1.0"
> > 	 echo "Content-Type: Multipart/Mixed; Boundary=\"$MIMEBOUNDARY\""
> > 	 echo "Content-Transfer-Encoding: 7bit"
> > 	 echo "To: $SENDTO"
> > 	 echo "From: The HylaFAX Receive Agent <fax>"
> > 	 echo "Subject: facsimile received from $SENDER";
> > 	 echo ""
> > 	 echo "--$MIMEBOUNDARY"
> > 	 echo "Content-Type: text/plain; charset=us-ascii"
> > 	 echo "Content-Transfer-Encoding: 7bit"
> > 	 echo ""
> > 	 echo "$FILE (ftp://$HOSTNAME:$PORT/$FILE):"; $INFO -n $FILE
> > 	 echo "ReceivedOn: $DEVICE"
> > 	 if [ "$MSG" ]; then
> > 	    echo ""
> > 	    echo "The full document was not received because:"
> > 	    echo ""
> > 	    echo "    $MSG"
> > 	    echo ""
> > 	    echo "    ---- Transcript of session follows ----"
> > 	    echo ""
> > 	    if [ -f log/c$COMMID ]; then
> > 		$SED -e '/-- data/d' \
> > 		     -e '/start.*timer/d' -e '/stop.*timer/d' \
> > 		     log/c$COMMID
> > 	    elif [ -n "$COMMID" ]; then
> > 		echo "    No transcript available (CommID c$COMMID)."
> > 	    else
> > 		echo "    No transcript available."
> > 	    fi
> > 	 else
> > 	    echo "CommID:     c$COMMID (ftp://$HOSTNAME:$PORT/log/c$COMMID)"
> > 	 fi
> > 	 echo ""
> > 	 echo "--$MIMEBOUNDARY"
> > 	 echo "Content-Type: application/postscript"
> > 	 echo "Content-Description: FAX document"
> > 	 echo "Content-Transfer-Encoding: 7bit"
> > 	 echo ""
> > 	 $FAX2PS $FILE 2>/dev/null
> > 	 echo ""
> > 	 echo "--$MIMEBOUNDARY--"
> > 	) | 2>&1 $SENDMAIL -ffax -oi $SENDTO
> >     fi
> > else
> >     #
> >     # Generate notification mail for a failed attempt.
> >     #
> >     (echo "To: $TOADDR"
> >      echo "From: The HylaFAX Receive Agent <fax>"
> >      echo "Subject: facsimile not received"
> >      echo ""
> >      echo "An attempt to receive facsimile on $DEVICE failed because:"
> >      echo ""
> >      echo "    $MSG"
> >      echo ""
> >      echo "    ---- Transcript of session follows ----"
> >      echo ""
> >      if [ -f log/c$COMMID ]; then
> > 	$SED -e '/-- data/d' \
> > 	     -e '/start.*timer/d' -e '/stop.*timer/d' \
> > 	    log/c$COMMID
> >      elif [ -n "$COMMID" ]; then
> > 	echo "    No transcript available (CommID c$COMMID)."
> >      else
> > 	echo "    No transcript available."
> >      fi
> >     ) | 2>&1 $SENDMAIL -ffax -oi $TOADDR
> > fi
> > 
> > Even after that i don't get any fax printer to this printer. Then I
> > tried the FaxDispatch script as told in reply to my mail;
> > 
> > #! /bin/sh
> > # Dispatch fax to email depending on own MSN or extention (ISDN lines)
> > # sourced from faxrcvd
> > #
> > if [ "$5" != "" ]; then
> >     PHONEMATCH=$5\$
> 
> use $7 here.

Ok I'll do that. Isn't  this to assign the username to $SENDTO ?
> 
> >     USERENTRY=`grep -v "^#" etc/users | grep "$PHONEMATCH"`
> >     if [ "$USERENTRY" != "" ]; then
> > 	USERNAME=`echo $USERENTRY | awk '{print $1}'`
> > 	SENDTO="$USERNAME"
> >     fi
> > fi
> > # Dispatch fax to the shared network printer
> > case "$DEVICE" in
> > faxCAPI) /usr/bin/tiff2ps -a $FILE | lpr -PVerkauf
> 
> Is it a postscript printer?

Yes. I can do this to print the fax file manually to the printer. Does
the above statement to change $5 to $7 affect this?

- Shafeer
> 
> > esac
> > 
> > Still I'm no success :( Neither i'm getting a notification mail for the
> > incoming faxes. Do i miss something here? any suggession are highly
> > appreciated
> > 
> 
> --
> holger
> 


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*